Advanced SearchSearch Tips
A Study on Absorption Properties of the EM Wave Absorber Using TiO2 in W-band
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Study on Absorption Properties of the EM Wave Absorber Using TiO2 in W-band
Choi, Chang-Mook; Ko, Kwang-Soob;
  PDF(new window)
In this paper, the electromagnetic (EM) wave absorbers using TiO2 as a dielectric material with chlorinated polyethylene (CPE) were investigated in W-band radio frequencies. We compared the relative permittivity with reflectionless curve and the absorption properties of samples containing 40 wt.%, 50 wt.%, 60 wt.%, 70 wt.%, and 80 wt.% TiO2. It is possible to realize a complex relative permittivity satisfying the reflectionless condition by choosing composition ratio of TiO2. The optimized composition ratio of TiO2 for the maximum absorption property is about 70 wt.%. As a result, we have confirmed the realization of an EM wave absorber with a high absorption property in W-band radio frequencies.
Absorption property;Complex relative permittivity;Material property;Reflectionless condition;;
 Cited by
Brooker, G. M., Birch, D., and Solms, J.(2005), "W-Band Airborne Interrupted Frequency Modulated CW Imaging Radar," IEEE Trans. Aero. Elec. Sys., vol.41, no.3, p.955-971. crossref(new window)

Brooker, G. M., Scheding, S., Bishop, M. V., and Hennessy, R. C.(2005), "Development and Application of Millimeter Wave Radar Sensors for Underground Mining," IEEE Sensors J., vol.5, no.6, pp. 1270-1280. crossref(new window)

Choi, C. M., Kim, D. I., and Li, R.(2007), "A Study on the Absorption Properties of EM Wave Absorbers Using Carbon," J. Korean Phys. Soc., vol.41, no.2, pp. 470-473. crossref(new window)

Choi, C. M., Kim, D. I., Je, S. H., and Choi, Y. S.(2007), "Study on Electromagnetic Wave Absorber for the Collision-avoidance Radar," Current Applied Physics, vol.7, no.5, pp. 586-589. crossref(new window)

Hashimoto, O(1997), Introduction to Wave Absorber, Tokyo, Morikita Shuppan, p. 29.

Kim, D. I., Choi, C. M., Li, R., and Lee, D. H.(2007), "A Study on Electromagnetic Wave Absorber for W-Band Radars Using Permalloy," IEICE Trans. Comm., vol. E90-B, no.8, pp. 2138-2142. crossref(new window)

Kotsuka, Y. and Yamazaki, H.(2000), "Fundamental Investigation on a Weakly Magnetized Ferrite Absorber," IEEE Trans. Electromag. Compat., vol.42, no.2, pp. 116-124. crossref(new window)

Moon, S. H., Shin, S. J., Song, J. M., Kim, D. I., and Kim, K. M. (2003), "Development of composite Ba ferrite EM wave absorbers for GHz frequency," J. Korea Electromag. Engin. Soc., vol. 14, no. 12, pp. 1329-1334.

Naito, Y. (1987), Electromagnetic Wave Absorbers, Tokyo, New Ohm, p. 80.

Russell, M. E., Crain, A., Curran, A., Campbell, R. A., Drubin, C. A., and Miccioli, W. F.(1997), "Millimeter-Wave Radar Sensor for Automotive Intelligent Cruise Control(ICC)," IEEE Trans. Microw. Theory Tech., vol.45, no.12, pp. 2444-2453. crossref(new window)

Soh, T., Hashimoto, O. (2001), "A Study on Millimeter-Wave Absorber Coating for V Band and W Band," Trans. IEICE, vol. J84-B, no.8, pp. 1523-1528.