JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Development of Camera-Based Measurement System for Crane Spreader Position using Foggy-degraded Image Restoration Technique
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of Camera-Based Measurement System for Crane Spreader Position using Foggy-degraded Image Restoration Technique
Kim, Young-Bok;
  PDF(new window)
 Abstract
In this paper, a foggy-degraded image restoration technique with a physics-based degradation model is proposed for the measurement system. When the degradation model is used for the image restoration, its parameters and a distance from the spreader to the camera have to be previously known. In the proposed image restoration technique, the parameters are estimated from variances and averages of intensities on two foggy-degraded landmark images taken at different distances. Foggy-degraded images can be restored with the estimated parameters and the distance measured by the measurement system. On the basis of the experimental results, the performance of the proposed foggy-degraded image restoration technique was verified.
 Keywords
foggy-degraded;image restoration;physic-base;degradation model;experiment;
 Language
English
 Cited by
 References
1.
Hiramatsu T., Ogawa T., and Haseyama M.(2008), "A Kalman Filter Based Restoration Method for In-vehicle Camera Images in Foggy Conditions", Proc. of IEEE International Conference on ICASSP 2008, pp. 1245-1248. crossref(new window)

2.
Kawai H., Kim Y.B., and Choi Y.W.(2009a), "Anti-sway System with Image Sensor for Container Cranes", Journal of Mechanical Science and Technology, Vol. 23, No. 10, pp. 2757-2765. crossref(new window)

3.
Kawai H., Choi Y.W., Kim Y.B., and Kubota Y.(2009b), "Measurement System Design for Sway Motion Based on Image Sensor", Networking, Sensing and Control, ICNSC'09. International Conference, pp. 185-188.

4.
Kim Y.H., Lee Y.J., Lee J.W. and Lee K.S.(2000), "Performance Analysis and Design of a High Efficiency Gantry Crane", Journal of Navigation and Port Research, Vol. 14, No. 4, pp. 395-406.

5.
Lee S.J, Park H. abd Hong G.S.(2005), "Sliding Mode Control of Container Crane", Journal of Navigation and Port Research, Vol. 29, No. 8, pp. 747-753. crossref(new window)

6.
Lee S.R., Ahan J.G., Lee Y.H., Son J.G. and So M.O.(2008), "RTGA Based States Observer Design of Container Crane Considered with Design Specification", Journal of Navigation and Port Research, Vol. 32, No. 10, pp. 851-856. crossref(new window)

7.
Mori K., Takahashi T., Ide I., Murase H., Miyahara T., and Tamatsu Y.(2007), "Recognition of Foggy Conditions by In-vehicle Camera and Millimeter Wave Radar", Intelligent Vehicles Symposium, 2007 IEEE, pp. 87-92.

8.
Narasimhan S. G. and Nayar S. K.(2003), "Contrast Restoration of Weather Degraded Images", IEEE Trans. Pattern Analysis and Machine Intelligence, Vol. 25, No. 6, pp. 713-724. crossref(new window)

9.
Park C.H., Park K.T., Kim D.H. and Shin Y.J.(2000), "A Study on Sway Control of Containers of Yard Crane", Proceedings of the 2000 Autumn Conference of Korean Institute of Navigation and Port Research, pp. 143-151.

10.
Son D.S., Lee J.W., Mhin J.T. and Lee K.S.(2002), "A Study on Anti-sway of Crane using Neural Network Predictive PID Controller", Proceedings of the 2002 Spring Conference of Korean Institute of Navigation and Port Research, pp. 219-227.