JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Mooring Winch Control System Design Based on Frequency Dependent LQR Control Approach
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Mooring Winch Control System Design Based on Frequency Dependent LQR Control Approach
Goo, Ja-Sam; Kim, Young-Bok;
  PDF(new window)
 Abstract
In this paper, the author consider control system design problem of the surface vessel where any types of floating units are included. To keep their motion/position, the Dynamic Positioning System(DPS) is equipped in. Even though sometimes the thrust systems are installed on them, in general the mooring winch system with the rope/wire is used. Therefore, in this paper we consider a single type mooring winch control problem to keep the vessel`s position. For this, we introduce an easy and useful control approach which is based on LQ control theory. In this approach, we introduce the frequency dependent weighting matrices which give the system filters to shape frequency characteristics of the controlled system and guarantee the control performance. Based on this, we will show that the proposed approach works well.
 Keywords
barge type surface vessel;dynamic positioning system(DPS);mooring winch;robust control;LQ control;frequency dependent weighting matrix;
 Language
Korean
 Cited by
 References
1.
An, Y. J. (2007), "Driving Characteristics Improvement of SRM Winch System Using Torque Sharing Function", Journal of the Korean Society of Marine Engineering, Vol. 31, No. 4, pp. 433-440. crossref(new window)

2.
Bernt, J. L., Fang, S. and Blank, M. (2011), "Vertical Position Control for Top Tensioned Riser With Active Heave Compensator", ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering Volume 1: Offshore Technology; Polar and Arctic Sciences and Technology, Rotterdam, The Netherlands, June 19-24.

3.
Cho, S. H., Yang, S. Y. and Park, R. S. (2002), "Circuit Design of Drive Control for Winch Drum", Journal of the Korea Institute of Military Science and Technology, Vol. 5, No. 1, pp. 45-58.

4.
Dokko, W. and Yang, S. Y. (2000), "Development of a Seaborne Towing Winch System", Journal of the Korea Institute of Military Science and Technology, Vol. 3, No. 1, pp. 47-57.

5.
Ha, J. M., Han, D. S. and Han, G. J. (2008), "The Study for Improve the Braking Power of Mooring Winch Brake", Proceedings of the KSME Conference, pp. 512-517.

6.
Ha, J. M., Han, D. S. and Han, G. J. (2009), "The Strength Analysis of Mooring Winch according to the Division Angle", Proceedings of the Korean Institute of Navigation and Port Research Conference, pp. 181-182.

7.
Ha, J. M., Han, D. S. and Han, G. J. (2010), "The Strength Analysis of Mooring Winch according to the Division Angle", Journal of Navigation and Port Research, Vol. 34, No. 10, pp. 775-780. crossref(new window)

8.
Kang, C., Jeong, J. and Kim, Y. (2013), "A Study on Control System Design for Ship Mooring Winch System", Journal of the Korean Society for Power System Engineering, Vol. 17, No. 3, pp. 89-98. crossref(new window)

9.
Lee, D. J. (2004), "Dynamic Characteristic of a Hydraulic Fishing Winch Simulator", Korean Journal of Fisheries and Aquatic Sciences, Vol. 37, No. 4, pp. 330-336. crossref(new window)

10.
Lee, D. J., Kim, J. K. and Kim, B. S. (2000), "Design of an Automatic Winch System for Small Fishing Vessel", Proceedings of the Korean Society of Fisheries Technology Conference, pp. 57-58.

11.
Lee, D. R. and Chun, S. H. (2007), "Characteristics of Ship Winches and Their Hydrostatic Drives", Transactions of The Korea Fluid Power Systems Society, Vol. 4, No. 2, pp. 27-34.

12.
Lee, Y. S., Jeong, T. G., Jung, C. H. and Kim, S. W. (2010), "Conceptual Design for Mooring Stability System and Equipments of Mobile Harbor", Journal of Navigation and Port Research, Vol. 34, No. 5, pp. 311-317. crossref(new window)