JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Numerical Simulation of Dynamic Soil-pile Interaction for Dry Condition Observed in Centrifuge Test
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Numerical Simulation of Dynamic Soil-pile Interaction for Dry Condition Observed in Centrifuge Test
Kown, Sun-Yong; Kim, Seok-Jung; Yoo, Min-Taek;
  PDF(new window)
 Abstract
Numerical simulation of dynamic soil-pile-structure interaction embedded in a dry sand was carried out. 3D model of the dynamic centrifuge model tests was formulated in a time domain to consider nonlinear behavior of soil using the finite difference method program, FLAC3D. As a modeling methodology, Mohr-Coulomb criteria was adopted as soil constitutive model. Soil nonlinearity was considered by adopting the hysteretic damping model, and an interface model which can simulate separation and slip between soil and pile was adopted. Simplified continuum modeling (Kim et al., 2012) was used as boundary condition to reduce analysis time. Calibration process for numerical modeling results and test results was performed through the parametric study. Verification process was then performed by comparing numerical modeling results with another test results. Based on the calibration and validation procedure, it is identified that proposed modeling method can properly simulate dynamic behavior of soil-pile system in dry condition.
 Keywords
Numerical simulation;Centrifuge model test;Finite difference method;Dynamic soil-pile interaction;
 Language
Korean
 Cited by
1.
3차원 수치 모델을 이용한 건조사질토 지반-말뚝-구조물 동적 상호작용의 매개변수 연구,권선용;유민택;

한국지반공학회논문집, 2016. vol.32. 9, pp.51-62 crossref(new window)
 References
1.
Beringen, F. L., Windle, D., and Van Hooydonk, W. R. (1979), Results of loading tests on driven piles in sand, Fugro, Netherlands.

2.
Boulanger, R.W. and Curras, C.J. (1999), "Seismic Soil-Pile-Structure Interaction Experiments and Analyses", Journal of Geotechnical and Geoenvironmental Engineering, American Society of Civil Engineers, Vol.125, No.9, pp.750-759. crossref(new window)

3.
Chang, D.W., Lin, B.S., and Cheng, S.H. (2007), "Dynamic Pile behaviors Affecting by Liquefaction from EQWEAP Analysis", In Proceedings: 4th International conference on earthquake geotechnical engineering, Thessaloniki, Greece; pp.1336.

4.
Cheng, Z. h. and Jeremic, B. (2009), "Numerical Modeling and Simulation of Pile in Liquefiable Soil", Soil Dynamics and Earthquake Engineering, 29, pp.1404-1416.

5.
Comodromos, E. M., Papadopoulou, M. C., and Rentzepris, I. K. (2009), "Pile Foundation Analysis and Design Using Experimental Data and 3-D Numerical Analysis", Computers and Geotechnics, 36, pp.819-836. crossref(new window)

6.
Hardin, B. O. and Drnevich, V. P. (1972). "Shear Modulus and Damping in Soils: Design Equations and Curves", Journal of the Soil Mechanics and Foundations Division, ASCE, Vol.98, No.SM7, July 1972, pp.667-692.

7.
Iai, S., Matsunaga, Y., and Kameoka, T. (1992), "Parameter Identification for a Cyclic Mobility Model", Report of the Port and Harbour Research Institute. 29(4): pp.57-83.

8.
Itasca Consulting Group (2006), FLAC3D (Fast Lagrangian Analysis of Continua in 3Dimensions) User's Guide, Minnesota, USA.

9.
Kim, S. H., Kwon, S. Y., Kim, M. M., and Han, J. T. (2012), "3D Numerical Simulation of a Soil-Pile System Under Dynamic Loading", Marine Georesources & Geotechnology, 30(4), pp.347-361. crossref(new window)

10.
Kraft Jr, L. M. (1990), "Computing Axial Pile Capacity in Sands for Offshore Conditions", Marine Georesources & Geotechnology, 9(1), pp.61-92. crossref(new window)

11.
Kwon, S. Y. (2014), "Numerical Simulation of Dynamic Soil-Pile-Structure Interactive Behavior Observed in Centrifuge Tests", Ph. D. Thesis, Seoul National University, South Korea

12.
Liyanapathirana, D. S. and Poulos, H. G. (2010), "Analysis of Pile behaviour in Liquefying Sloping Ground", Computers and Geotechnics, 37(1), pp.115-124. crossref(new window)

13.
Martin, G. R. and Chen, C. Y. (2005), "Response of Piles due to Lateral Slope Movement", Computers and Structures, Vol.83, pp.588-598. crossref(new window)

14.
Miwa, S., Ikeda, T., and Sato, T. (2006), "Damage Process of Pile Foundation in Liquefied Ground during Strong Ground Motion", Soil Dynamics and Earthquake Engineering, 26(2), pp.325-336. crossref(new window)

15.
Randolph, M. F., Dolwin, R., and Beck, R. (1994), "Design of Driven Piles in Sand", Geotechnique, 44(3), pp.427-448. crossref(new window)

16.
Reddy, E. S., Chapman, D. N., and Sastry, V. V. (2000), "Direct Shear Interface Test for Shaft Capacity of Piles in Sand", Geotechnical Testing Journal, 23(2), pp.199-205. crossref(new window)

17.
Tahghighi, H. and Konagai, K. (2007), "Numerical Analysis of Nonlinear Soil-pile Group Interaction under Lateral Loads", Soil Dynamics and Earthquake Engineering, 27(5), pp.463-474. crossref(new window)

18.
Uzuoka R., Sento N., and Kazama M. (2007), "Three-dimensional Numerical Simulation of Earthquake Damage to Group-piles in a Liquefied Ground", Soil Dynamics and Earthquake Engineering, 27, pp.395-413. crossref(new window)

19.
Yang, E. K. (2009), "Evaluation of Dynamic p-y curves for a Pile in Sand from 1g Shaking Table Tests", Ph. D. Thesis, Seoul National University, South Korea.

20.
Yoo, M. T. (2013), "Evaluation of dynamic pile behavior by centrifuge tests considering kinematic load effect," Ph. D. Thesis, Seoul National University, South Korea.