Pulsation According to Pre-Compression Sections and Valve Plate Design for a Swash Plate Type Piston Pump

Title & Authors
Pulsation According to Pre-Compression Sections and Valve Plate Design for a Swash Plate Type Piston Pump
Sa, Jin-Woong; Chung, Won-Jee; Bae, Jun-Hyeong; Lee, Jeong-Min;

Abstract
This study investigated the design factors of the opening area in order to consider the kinematic stability of a valve plate, conducting an analysis of the reduction effects of pressure pulsation and flow ripple depending on the design factors, using the $\small{SimulationX^{(R)}}$ (Germany) hydraulic analysis program. Further, we performed a structure analysis to confirm the kinematic stability of the valve plate in a swash plate type piston pump, and analyzed the effects of pulsation on a 1-step V-type notch, 2-step V-type notch, and 2-step U-type notch to determine the effects of pulsation reduction. Finally, we show the effectiveness of our proposed design of the pre-compression sections on a valve plate in terms of low pulsation by using the hydraulic analysis program, $\small{SimulationX^{(R)}}$.
Keywords
Swash plate type variable piston pump;Pulsation;Structure analysis;Pre-compression;SimulationX;Notch design of valve plate;
Language
Korean
Cited by
References
1.
Kim, J. G., 2003, Performance Characteristics with Valve Plate Shapes in Swash Plate Type Oil Piston Pumps, A Thesis for a Doctorate, Chonbuk National University, Republic of Korea.

2.
Yoon, Y. H., Jang, J. S., Lee, Y. B., 2012, An Analysis of Dynamic Characteristics for Variable Swash Plate Type Axial Piston Pump, Proceedings of the Conference on Korea Society for Fluid Power and Construction Equipments, 23-30.

3.
Jang, J. H., Chung, W. J., 2013, Application of Simulation X Based Simulation Technique to Notch Shape Optimization for a Variable Swash Plate Type Piston Pump, Proceedings of the International Conference on Scientific Computing, 137-142.

4.
Lee, I. Y., 2012, Hydraulic Engineering, Munundang, Republic of Korea.

5.
Jang, D. H., Lee, S. G., Kwon, J. H., Park, S. H., 2009, A Study on Pressure, Flow Fluctuation and Noise in the Cylinder of Swash Plate Type Axial Piston Pump, Transactions of the Korea Fluid Power Systems Society, 6:3 1-9.

6.
Yoon, Y. H., Jang, J. S., 2012, Simulation X, Multi-domain Simulation and Modeling Tool for the Design, Analysis, and Optimization of Complex systems, Transactions of the Korea Fluid Power Systems Society, 9:1 56-69.

7.
Choi, S. L., Jang, J. S., 2013, Shape Design Sensitivity Analysis of the Valves Installed in the Hydraulic Driving Motor, Journal of the Korea Society for Simulation, 22:3 81-87.

8.
Jung, C. D., Chung, W. J., 2012, Application of Solid \$Works^{(R)}\$, and Lab \$View^{(R)}\$-based Simulation Technique to Gain Tuning of a 6-axis Articulated Robot, Proceedings of the International Conference on Scientific Computing, 132-138