JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Effects of Packing Pressure and Time on Injection Molding of Plastic Micro-channel Plates
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Effects of Packing Pressure and Time on Injection Molding of Plastic Micro-channel Plates
Woo, Sang-Won; Park, Si-Hwan;
  PDF(new window)
 Abstract
Recently, polymeric micro-fluidic biochips with numerous micro patterns on the surface were fabricated by injection molding for realizing low-cost mass production of devices. To evaluate the effects of process parameters on large-scale micro-structure replication, a tool insert with surface structures having a patterns of trapezoidal shapes (height: ) was employed. During injection molding, PMMA was used; packing phase parameters and mold temperature were investigated. The replicated surface textures were quantitatively characterized by confocal laser microscopy with 10-nm resolution. The degree of replication at low mold temperatures was found to be higher than that at high mold temperature at the beginning of the packing stage. Thereafter, the degree of replication increased to a greater extent at higher mold temperatures; application of higher mold temperatures improved the degree of replication.
 Keywords
Micro-fluidic chip;Injection molding;Packing time;Replication;
 Language
Korean
 Cited by
 References
1.
Doh, I., Yoo, H. I., Cho, Y. H., Lee, J. S., Kim, H. K., Kim, J. K., 2012, Viable Capture and Release of Cancer Cells in Human Whole Blood, Applied Physics Letters, 101:4 043701-043704. crossref(new window)

2.
Adams, A. A., Okagbare, P. I., Feng, J., Hupert, M. L., Patterson, D., Gottert, J., McCarley, R. L., Nikitopoulos, D., Murphy, M. C.. Soper. S. A., 2008, Highly Efficient Circulating Tumor Cell Isolation from Whole Blood and Label-free Enumeration Using Polymer-based Microfluidics with an Integrated Conductivity Sensor, Journal of the American Chemical Society, 130:24 8633-8641. crossref(new window)

3.
Woo, S. W., Jung, J. S., Kim, J. Y., Park, H. H., Park, S. H., Kim, S. K., Yoo, Y. E., 2015, Fabrication of Plastic Bio-chip Employing Micro-channels, KSMTE Annual Spring Conference, 266.

4.
Attia, U. M., Marson, S., Alcockb, J. R., 2009, Micro-Injection Moulding of Polymer Microfluidic Devices, Microfluidics and Nanofluidics, 7:1 1-28. crossref(new window)

5.
Despa, M., Kelly, K., Collier, J., 2002, Injection Molding Using High Aspect Ratio Microstructures Mold Inserts Produced by LIGA Technique, Proceedings of SPIE-The International Society for Optical Engineering.

6.
Wimberger-Friedl, R., 1999, Injection Molding of Sub-${\mu}m$ Grating Optical Elements, Journal Injection Molding Technology, 4 78-83.

7.
De Mello A., 2002, Plastic Fantastic?, Lab On a Chip, 2 31N-36N. crossref(new window)

8.
Shen, Y. K., Yeh, S. L., Chen, S. H., 2002, Three-dimensional Nonnewtonian Computations of Micro-injection Molding with the Finite Element Method, International Communications in Heat and Mass Transfer, 29:5 643-652. crossref(new window)

9.
Zhao, J., Mayes, R., Chen, G., Xie, H., Chan, P., 2003, Effects of Process Parameters on the Micro Molding Process, Polymer Engineering & Science, 43:9 1542-1554. crossref(new window)

10.
Sha, B., Dimov, S., Griffiths, C., Packianather, M., 2007, Microinjection Moulding: Factors Affecting the Achievable Aspect Ratios, The International Journal of Advanced Manufacturing Technology, 33:1 147-156. crossref(new window)

11.
Park, S. H., Woo, S. W., Jeong, J. S., Kim, S. K., Yoo, Y. E., 2015, Deformation of the Micro-stucture during the Releasing of the Injection Molding Process, KSMTE Annual Autumn Conference, 266.

12.
Park, S. H., Kim, S. M., Kang, S. Y., Lee, W. I., Yoo, Y. E., 2012, Global/Local Analysis of Filling Behavior during Injection Molding for a Large Scale Plate with Micro Patterns, International Polymer Processing 27:2 ,205-212. crossref(new window)

13.
Park, S. H., Yoo, Y. E., Lee, W. I., 2014, Effect of Molding Conditions on Demolding Force During Injection Molding of Parts with Micro-features, Journal of the Korean Society of Manufacturing Technology Engineers, 23:2 127-132. crossref(new window)

14.
Park, S. H., Lee, W. I., Moon, S. N., Yoo, Y. E., Cho, Y. H., 2011, Injection Molding Micro Patterns with High Aspect Ratio Using a Polymeric Flexiable Stamper, eXPRESS Polymer Letters, 5:11 950-958. crossref(new window)