JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Microstructure and Mechanical Properties of Cu-Ni-Si Alloy Deformed by Differential Speed Rolling
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Microstructure and Mechanical Properties of Cu-Ni-Si Alloy Deformed by Differential Speed Rolling
Lee, Seong-Hee; Han, Seung Zeon;
  PDF(new window)
 Abstract
Effects of conventional rolling(CR) and differential speed rolling(DSR) on the microstructure and mechanical properties of Cu-Ni-Si alloy were investigated in detail. The copper alloy with thickness of 3 mm was rolled to 50 % reduction at ambient temperature without lubricant with a differential speed ratio of 2:1. The conventional rolling in which the rolling speed of upper and lower rolls is identical was performed under identical rolling conditions. The shear strain introduced by the CR showed positive values at positions of upper roll side and negative values at positions of lower roll side. However, it showed zero or positive values at all positions for the samples rolled by the DSR. The microstrucure and texture development of the as-rolled copper alloy did not show any significant difference between CR and DSR. The tensile strength of the DSR processed specimen was larger than that of the CR processed specimen. The effects of rolling methods on the microstructure and mechanical properties of the as-rolled copper alloy are discussed in terms of the shear strain.
 Keywords
differential speed rolling;Cu-Ni-Si alloy;microstructure;mechanical property;shear strain;
 Language
Korean
 Cited by
 References
1.
Q. Cui and K. Ohori, Mater. Sci. Tech., 16, 1095 (2000). crossref(new window)

2.
T. Hirohata, S. Masaki and S. Shima, J. Mater. Proc. Tech., 111, 113 (2001). crossref(new window)

3.
C. Y. Lim, S. Z. Han and S. H. Lee, Met. Mater. Int., 12, 225 (2006). crossref(new window)

4.
K. -H. Kim and D. N. Lee, Acta Mater., 49, 2583 (2001). crossref(new window)

5.
T. Sakai, S. Hamada and Y. Saito, Scripta Mater., 44, 2569 (2001). crossref(new window)

6.
S. H. Lee, D. J. Yoon, T. Sakai, S. H. Kim and S. Z. Han, J. Korean Inst. Met. Mater., 47, 121 (2009).

7.
S. H. Lee, D. J. Yoon, K. Euh, S. H. Kim and S. Z. Han, J. Korean Inst. Met. Mater., 48, 77 (2010). crossref(new window)

8.
S. H. Lee, J. Y. Lim, H. Utsunomiya, K. Euh and S. Z. Han, J. Korean Inst. Met. Mater., 48, 942 (2010). crossref(new window)

9.
S. H. Lee, J. Y. Lim, D. J. Yoon, K. Euh and S. Z. Han, Korean J. Mater. Res., 21, 15 (2011). crossref(new window)

10.
S. H. Lee, Korean J. Mater. Res., 22, 581 (2012). crossref(new window)