Influence of Mo Addition on High Temperature Deformation Behavior of L12 Type Ni3Al Intermetallics

Title & Authors
Influence of Mo Addition on High Temperature Deformation Behavior of L12 Type Ni3Al Intermetallics
Han, Chang-Suk; Jang, Tae-Soo;

Abstract
The high temperature deformation behavior of $\small{Ni_3Al}$ and $\small{Ni_3(Al,Mo)}$ single crystals that were oriented near <112> was investigated at low strain rates in the temperature range above the flow stress peak temperature. Three types of behavior were found under the present experimental conditions. In the relatively high strain rate region, the strain rate dependence of the flow stress is small, and the deformation may be controlled by the dislocation glide mainly on the {001} slip plane in both crystals. At low strain rates, the octahedral glide is still active in $\small{Ni_3Al}$ above the peak temperature, but the active slip system in $\small{Ni_3(Al,Mo)}$ changes from octahedral glide to cube glide at the peak temperature. These results suggest that the deformation rate controlling mechanism of $\small{Ni_3Al}$ is viscous glide of dislocations by the <110>{111} slip, whereas that of $\small{Ni_3(Al,Mo)}$ is a recovery process of dislocation climb in the substructures formed by the <110>{001} slip. The results of TEM observation show that the characteristics of dislocation structures are uniform distribution in $\small{Ni_3Al}$ and subboundary formation in $\small{Ni_3(Al,Mo)}$. Activation energies for deformation in $\small{Ni_3Al}$ and $\small{Ni_3(Al,Mo)}$ were obtained in the low strain rate region. The values of the activation energy are 360 kJ/mol for $\small{Ni_3Al}$ and 300 kJ/mol for $\small{Ni_3(Al,Mo)}$.
Keywords
high temperature deformation;$\small{Ni_3Al}$;strain rate;dislocation glide;slip;
Language
English
Cited by
References
1.
C. S. Oh and C. S. Han, Korean J. Mater. Res., 22, 42 (2012).

2.
C. S. Han, K. W. Koo and D. C. Oh, Korean J. Mater. Res., 16, 241 (2006).

3.
S. U. An, S. C. Kim, O. D. Im, S. H. Kim, Y. H. Jin, J. S. Choe, J. H. Lee, S. J. Lee, D. L. Seo, T. H. Lee and M. Y. Heo, Korean J. Mater. Res., 8, 1165 (1998).

4.
S. I. Rao, D. M. Dimiduk and T. A. Parthasarathy, Scripta Mater., 66, 410 (2012).

5.
J. R. Nicholls and R. D. Rawlings, J. Mater. Sci., 12, 2456 (1977).

6.
Y. Q. Sun and N. Yang, Intermetallics, 9, 979 (2001).

7.
T. Suzuki, Y. Mishima and S. Miura, ISIJ Int., 29, 1 (1989).

8.
B. V. Petukhov, M. Bartsch and U. Messerschmidt, Appl. Phys., 9, 89 (2000).

9.
J. N. Wang and T. G. Nieh, Scripta Metall. Mater., 33, 633 (1995).

10.
B. V. Petukhov, Crystallogr. Rep., 42, 161 (1997).

11.
S. Takeuchi, Philos. Mag. A, 71, 1255 (1995).

12.
S. A. Sajjadi and S. Nategh, Mater. Sci. Eng. A, 307, 158 (2001).

13.
M. M. P. Janssen, Metall. Trans., 4, 1623 (1973).

14.
K. Hoshino, S. J. Rothman and R. S. Averback, Acta Metall. Mater., 36, 1271 (1988).

15.
S. Frank, J. Rüsing and Chr. Herzig, Intermetallics, 4, 601 (1996).