Publisher : The Korea Association of Crystal Growth
DOI : 10.6111/JKCGCT.2016.26.3.126
Title & Authors
Microstructure of Ti-6Al-4V alloy Kim, Tae Wan; Yoon, Yo Han; Oh, Ho Ra; Park, Jong Bum; Lee, Jung-Il; Ryu, Jeong Ho;
Ti alloys have been used for orthopedic devices, automobile and aircraft because it has several beneficial properties such as a low density, a low modulus of elasticity, excellent high-temperature strength, excellent corrosion resistance and biocompatibility. In this study, Ti-64 composition (6 wt% Al, 4 wt% V) is investigated as a representative Ti-alloy system on the crystallographic characteristics and microstructure. We investigated crystal structure of the Ti-64 sample by XRD, and analyzed microstructure by compositional differences measured using FE-SEM and EDX.
Ti-Al-4V alloy; phase;Microstructure;
Y.H. Lee, J.T. Yeom, N.K. Park, S.S. Hong, I.O. Shim, S.M. Hwang and C.S. Lee, "Prediction of microstructure durign high temperature forming of Ti-6Al-4V alloy", J. Kor. Inst. Met. & Mater. 43 (2005) 847.
D.-G. Lee, Y.H. Lee, C.S. Lee and S. Lee, "Effect of volume fraction of tempered martensite on dynamic deformation properties of Ti-6Al-4V alloy having bimodal microstructure", J. Kor. Inst. Met. & Mater. 42 (2004) 455.
S.G. Pyo, J.K. Oh, N.J. Kim and M. Yamaguchi, "Al compositional dependence on the deformation behavior and mechanical properties in ultra high purity TiAl alloys", J. Kor. Inst. Met. & Mater. 38 (2000) 629.
I.-S. Jung, M.-C. Kim, J.-H. Lee, M.-H. Oh and D.-M. Wee, "Phase equilibria of TiAl alloy by directional solidification", J. Kor. Inst. Met. & Mater. 37 (1999) 448.
X Wu, "Review of alloy and process development of TiAl alloys", Intermetallics 14 (2006) 1114.
M. Geetha, A.K. Singh, R. Asokamani and A.K. Gogia, "Ti based biomaterials, the ultimate choice for orthopaedic implants - A review", Prog. Mater. Sci. 54 (2009) 397.
S.L.R. da Silva, L.O. Kerber, L. Amaral and C.A. dos Santos, "X-ray diffraction measurements of plasmanitrided Ti-6Al-4V", Surf. Coat. Tech. 116-119 (1999) 342.
J.J. Lin, Y.H. Lv, Y.X. Liu, B.S. Xub, Z. Sun, Z.G. Li and Y.X. Wu, "Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing", Mater. Des. 102 (2016) 30.
G.A. Ravi, C. Qiu and M.M. Attallah, "Microstructural control in a Ti-based alloy by changing laser processing mode and power during direct laser deposition", Mater. Lett. 179 (2016) 104.
D. Batalu, G. Cosmeleata and A. Aloman, "Critical analysis of the Ti-Al phase diagrams", U.P.B. Sci. Bull., Series B 68 (2006) 77.