Advanced SearchSearch Tips
Combustion Properties of Wood Treated by Combining Phosphorus-Nitrogen Compounds
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Applied Chemistry for Engineering
  • Volume 27, Issue 1,  2016, pp.39-44
  • Publisher : The Korean Society of Industrial and Engineering Chemistry
  • DOI : 10.14478/ace.2015.1116
 Title & Authors
Combustion Properties of Wood Treated by Combining Phosphorus-Nitrogen Compounds
Jin, Eui; Chung, Yeong-Jin; Kim, Si-Kuk;
  PDF(new window)
This study was to investigate the characteristics of combustion toxic gases of pinus rigida specimens treated with chemical additives such as pyrophosphoric acid (PP)/ammonuium ion (), methylenepiperazinomethyl-bis-phosphonic acid (PIPEABP) and . Each pinus rigida plates was painted in three times with 15 wt% of each chemical additives in the aqueous solution. After drying these specimens at room temperature, the production of combustion gases and smoke was examined by the cone calorimeter (ISO 5660-1). As a result, the peak mass loss rate time (PMLR time) treated with chemicals was delayed upto 10.5~47.4% compared to that of using untreated specimen. In addition, the peak production of carbon monoxide () of 32.1~71.4% and total smoke release rate (TSRR) of 15.6~43.6% for test pieces treated with the chemical additive were higher than that of using the virgin plate. In particular, for the specimens treated with the chemical additive, the rate of smoke release (RSR) 29.4~41.5% was obtained higher than that of untreated plate except the specimen treated with . It can thus be concluded that the treatment using the chemical additive could partially increase the combustion-retardation properties of the species when compared to those of the virgin plate.
Methylenepiperazinomethyl-bis-phosphonic acid (PIPEABP);total smoke release rate (TSRR);rate of smoke release (RSR); production;
 Cited by
J. C. Middleton, S. M. Dragoner, and F. T. Winters, Jr., An evaluation of borates and other inorganic salts as fire retardants for wood products, Fore. Prod. J., 15(12), 463-467 (1965).

I. S. Goldstein and W. A. Dreher, A non-hygroscopic fire retardant treatment for wood, Fore. Prod. J., 11(5), 235-237 (1961).

R. Kozlowski and M. Hewig, 1st Int Conf., Progress in Flame Retardancy and Flammability Testing, Institute of Natural Fibres, Pozman, Poland (1995).

R. Stevens, S. E. Daan, R. Bezemer, and A. Kranenbarg, The strucure- activity relationship of retardant phosphorus compounds in wood, Polym. Degrad. Stab., 91(4), 832-841 (2006). crossref(new window)

Y. J. Chung, Flame retardancy of veneers treated by ammonium salts, J. Korean Ind. Eng. Chem., 18(3), 251-255 (2007).

M. L. Hardy, Regulatory status and environmental properties of brominated flame retardants undergoing risk assessment in the EU: DBDPO, OBDPO, PeBDPO and HBCD, Polym. Degrad. Stab., 64(3), 545-556 (1999). crossref(new window)

Y. Tanaka, Epoxy Resin Chemistry and Technology, Marcel Dekker, New York (1988).

ISO 5660-1, Reaction-to-Fire Tests-Heat Release, Smoke Production and Mass Loss Rate-Part 1: Heat Release Rate (Cone Calorimeter Method), Genever (2002).

V. Babrauskas, New Technology to reduce Fire Losses and Costs, eds. S. J. Grayson and D. A. Smith, Elsevier Applied Science Publisher, London, UK. (1986).

M. M. Hirschler, Thermal decomposition and chemical composition, 239, ACS Symp. Ser., 797, 293-306 (2001).

C. H. Lee, C. W. Lee, J. W. Kim, C. K. Suh, and K. M. Kim, Organic phosphorus-nitrogen compounds, manufacturing method and compositions of flame retardants containing organic phosphorus- nitrogen compounds, Korean Patent 2011-0034978 (2011).

O. Grexa, E. Horvathova, O. Besinova, and P. Lehocky, Falme Retardant Treated Plyood, Polym. Degrad. Stab., 64(3), 529-533 (1999). crossref(new window)

Cischem Com, Flame Retardants, Chischem. Com. Co., Ltd., Korea (2009).

J. J. Choi, Y. J. Chung, S. K. Kim, D. I. Shin, B. Y. Lee, H. J. Park, et. al., Development of Technology for Eco-Friendly Flame Retardant Agent and Retardant Treatment, NEMA Next Generation 2010-011, National Emergency Management Agency (2013).

Y. J. Chung, Combustion characteristics of Pinus Rigida Specimens Treated with Phosphorus-Nitrogen Addditives, Fire Sci. Eng., 29(6), in Press (2015).

Y. J. Chung and E. Jin, Synthesis of Alkylenediaminoalkyl- Bis-Phosphonic Acid Derivatives, J. Kor. Oil Chem. Soc., 30(1), 1-8 (2013). crossref(new window)

Kosha, Material Safety Data Sheet in Chemical Materials Information, Kosha, Korea (2014).

R. S. Berns, Billmeyer and Saltszman's Principles of Color Technology, Wiley Intersciences (2000).

W. T. Simpso, Drying and Control of Moisture Content and Dimensional Changes, Chap. 12, Wood Handbook-Wood as an Engineering Material, Forest Product Laboratory U.S.D.A., Forest Service Madison, Wisconsin, U.S.A. 1-21 (1987).

V. Babrauskas, The SFPE Handbook of Fire Protection Engineering, Fourth Ed., National Fire Protection Association, Massatusetts, U.S.A. (2008).

M. J. Spearpoint and G. J. Quintiere, Predicting the Burning of Wood Using an Integral Model, Combust. Flame, 123, 308-325 (2000). crossref(new window)

ISO 5660-2, Reaction-to-Fire Tests-Heat Release, Smoke Production and Mass Loss Rate-Part 2: Smoke Production Rate Heat (Dynamic Measurement), Genever (2002).

A. P. Mourituz, Z. Mathys, and A. G. Gibson, Heat Release of Polymer Composites in Fire, Composites: Part A, 38(7), 1040-1054 (2005).

M. M. Hirscher, Reduction of smoke formation from and flammability of thermoplastic polymers by metal oxides, Polymer, 25, 405-411 (1984). crossref(new window)

J. Zhang, D. D. Jiang, and C. A. Wilkie, Thermal and flame properties of polyethylene and polypropylene nanocomposites based on an oligomerically-modified clay, Polm. Degrad. Stab., 91(2), 298-304 (2006). crossref(new window)

Y. J. Chung, H. M. Lim, E. Jin, and J. K. Oh, Combustion-retardation properties of low density polyethylene and etylene vinyl acetate mixtures with magnesium hydroxide, Appl. Chem. Eng., 22, 439-443 (2011).

S. Ishihara, Smoke and Toxic Gases Produced During Fire, Wood Resh. Tech. Notes, 16(5), 49-62 (1981).