JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Electrical and Resistance Heating Properties of Carbon Fiber Heating Element for Car Seat
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Applied Chemistry for Engineering
  • Volume 27, Issue 2,  2016, pp.210-216
  • Publisher : The Korean Society of Industrial and Engineering Chemistry
  • DOI : 10.14478/ace.2016.1018
 Title & Authors
Electrical and Resistance Heating Properties of Carbon Fiber Heating Element for Car Seat
Choi, Kyeong-Eun; Park, Chan-Hee; Seo, Min-Kang;
  PDF(new window)
 Abstract
In this paper, the electrical and resistance heating properties of carbon fiber heating elements with different electroless Ni-P plating times for car seat were studied. The specific resistance and specific heat of the carbon fibers were determined using 4-point probe method and differential scanning calorimetry (DSC), respectively. The surface morphology and temperature of carbon fibers were measured by scanning electron microscope (SEM) and thermo-graphic camera, respectively. From experimental results, the nickel layer thickness and surface temperature of carbon fibers increased with increasing the plating time. However, the specific heat and specific resistance decreased with respect to the increased plating time. In conclusion, the electroless Ni-P plating could improve the resistance heating and electrical properties of carbon fiber heating elements for car seat.
 Keywords
carbon fibers;resistance heating properties;electrical properties;heating element;electroless Ni-P coating;
 Language
Korean
 Cited by
 References
1.
K. S. Yoo, B. J. Jung. I. H. Jung, and D. H. Hyun, The Researches in the Properties of Heating of High Efficient Nano Surface Heater, J. Manuf. Eng. Technol., 10, 416-420 (2009).

2.
B. J. Han, D. S. Park, and K. W. Koo, Development of Energy-saving Heat Sheet with the Principles of PTC, J. Electric. Eng. Technol., 7, 2053-2054 (2010).

3.
S. C. Kim and D. H. Kim, Analysis for the Thermal Properties of the Electrical Wire according to Overload and Disconnection, J. Korean Soc. Saf., 22, 26-31 (2007).

4.
J. S. Kim, C. Y. Ryu, S. C. Kim, H. T. Oh, J. R. Yuk, and D. W. Kim, The Effects of Electromagnetic Field Emitted by Cellular Phone on Cognitive Function in Human, J. Korean Inst. Electromagn. Sci., 14. 606-615 (2003).

5.
M. S. Hong, K. M. Bea, H. S. Lee, S. J. Park, K. H. An, S. J. Kang, and B. J. Kim, Electromagnetic Interference Shielding Behaviors of Electroless Nickel-loaded Carbon Fibers-reinforced Epoxy Matrix Composite, Appl. Chem. Eng., 22, 672-678 (2011).

6.
J. G. Kim, C. H. Chung, and Y. S. Lee, The Effect of Crystallization by Heat Treatment Electromagnetic Interference Shielding Efficiency of Carbon Fibers, Appl. Chem. Eng., 22, 138-143 (2011).

7.
Z. H. Jin, K. J. Shim, T. W. Kong, H. M. Jeong, and H. S. Chung, A Study on the Temperature and Electrical Characteristics of Carbon Heater, Korean Soc. Power Syst. Eng., 10, 71-76 (2006).

8.
K. Y. Bae, K. S. Lee, J. H. Shin, H. M. Jeong, H. S. Chung, and J. S. Chun, Study on the Heat Generation Characteristics of the Carbon Heating Source with High Temperature, Korean Soc. Mech. Eng., 2, 106-111 (2001).

9.
J. Y. Lee, J. H. Oh, X. P. Yang, and S. K. Ryu, Relationship Between Exothermic Heat and Carbon Contents of Pitch-based Carbon Fiber, Carbon Lett., 10, 202-207 (2009). crossref(new window)

10.
K. M. Chu, D. J. Yun, D. O. Kim, H. K. Park, and S. H. Park, Study of Electric Heating Effects on Carbon Nanotube Polymer Composites, Org. Electron., 15, 2734-2741 (2014). crossref(new window)

11.
M. S. Kim, K. G. Kong, K. R. Kim, H. W, Park, O. Y. Park, Y. B. Park, M. Y. Jung, S. H. Lee, and S. G. Kim, Experimental and Numerical Study of Heating Characteristics of Discontinuous Carbon Fiber-epoxy Composite, Compos. Res., 26, 72-78 (2013). crossref(new window)

12.
M. H. Jee, J. H. Lee, I. S. Lee, and D. H. Baik, Electrical Properties and Heating Performance of Polyurethane Hybrid Nanocomposite Films Containing Graphite and MWNTs, Text. Sci. Eng., 50, 108-114 (2013). crossref(new window)

13.
T. J. Kim and D. D. L. Chung, Carbon Fiber Mats as Resistive Heating Elements, Carbon, 41, 2427-2451 (2003). crossref(new window)

14.
K. Y. Bae, K. S. Lee, T. W. Kong, H. S. Chung, H. Y. Jeong, and H. T. Chung, A Study on Application of Warm Air Circulator by Using the Carbon Heating Element with Particle Type, Korean Soc. Power Syst. Eng., 7, 31-37 (2003).

15.
K. S. Lee, K. Y. Bea, H. M. Jeong, H. S. Chung, K. Y. Lee, and J. S. Chun, Heat and Electrical Characteristics of Carbon Heating Rod, Kroean Soc. Mech. Eng., 5, 1412-1417 (2002).

16.
C. T. Hsieh, D. Y. Tzou, Z. S. Huang, C. Y. Lee, and J. K. Chang, High Performance Infrared Heaters Using Carbon Fiber Filaments Decorated with Alumina Layer by Microwave-assisted Method, J. Tai. Inst. Chem. Eng., 54, 1-5 (2015). crossref(new window)

17.
H. K. Lee, A Study on Evaluation System of Warming Effect Caused by Far-infrared Radiation, PhD Dissertation, Yonsei University, Seoul, Korea (2005).

18.
K. J. Brown, R. Farrelly, S. M. O'Shaughnessy, and A. J. Robinson, Energy Efficiency of Electrical Infrared Heating Elements, Appl. Energy, 162, 581-588 (2016). crossref(new window)

19.
B. J. Kim, W. K. Choi, H. S. Song, J. K. Park, J. Y. Lee, and S. J. Park, Preparation and Characterization of Highly Conductive Nickel-plated Glass Fibers, Carbon Lett., 9, 105-107 (2008). crossref(new window)

20.
B. J. Kim, W. K. Choi, M. K. Um, and S. J. Park, Effects of Nickel Plating Thickness on Electric Properties of Nickel/Carbon Hybrid Fibers, Surf. Coat. Technol., 205, 3416-3421 (2011). crossref(new window)

21.
S. S. Tzeng and F. Y. Chang, Electrical Resistivity of Electroless Nickel Plated Carbon Fibers, Thin Solid Films, 388, 143-149 (2001). crossref(new window)

22.
A. E. Zantout and O. I. Zhupanska, On the Electrical Resistance of Carbon Fiber Polymer Matrix Composites, Compos. A, 41, 1719-1727 (2010). crossref(new window)

23.
W. D. Chen, Y. Sung, C. P. Chang, Y. C. Chen, and M. D. Ger, The Preparation of Thermo-responsive Palladium Catalyst with High Activity for Electroless Nickel Deposition, Surf. Coat. Techol., 204, 2130-2135 (2010). crossref(new window)

24.
D. W. Pyo, S. Y. Eom, Y. S. Lee, and S. G. Ryu, Exothermic Characteristics of PAN-based Carbon Fiber According to High Temperature Treatment, Korean Chem. Eng. Res., 49, 218-223 (2011). crossref(new window)

25.
S. J. Jung, Characteristics of Deposits with Various Condition of Electroless Nickel Plating, MS Dissertaion, Chungbuk National University, Cheongju, Korea (2001).

26.
H. Z. Yu and C. V. Thompson, Grain Growth and complex Stress Evolution During Volmer-Weber Growth of Polycrystalline Thin Films, Acta Mater., 67, 189-198 (2014). crossref(new window)

27.
W. K. Choi, Preperation and Characterization of Highly Electrically Conductive Carbon Fibers Produced by Ni plating, MS Dissertation, Chungnam National University, Deajeon, Korea (2010).

28.
D. C. Shin and H. G. Woo, A Study on the Electrical Fan Heater using High Efficiency Induction Heating, J. KIIEE, 26, 24-30 (2012).

29.
A. T. Chien, S. B. Cho, Y. Joshi, and S. Kumar, Electrical Conductivity and Joule Heating of Polyacrylonitrile/Carbon nanotube Composite Fibers, Polymer, 55, 6896-6905 (2014). crossref(new window)

30.
Y. Jing and G. J. Young, Highly Elastic and Transparent Multiwalled Carbon Nanotube/Polydimethylsiloxane Bilayer Films as Electric Heating Materials, Mater. Des., 86, 72-79 (2015). crossref(new window)