Advanced SearchSearch Tips
A Study on the Calculation of the Design Loads for Blast Doors of Underground Ammunition Facilities Using M&S
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
A Study on the Calculation of the Design Loads for Blast Doors of Underground Ammunition Facilities Using M&S
Park, Young Jun; Baek, Jonghyuk; Son, Kiyoung;
  PDF(new window)
An underground ammunition facility requires less quantity distances than the aboveground counterpart. However, chamber blast doors which resist the high blast-pressures are necessary for prevention of the consecutive explosions when an accident explosion occurs at any chamber. This paper aims to propose an procedure for calculation of the design loads for the chamber blast doors. Modeling considerations are drawn through analyzing the influences of the geometrical shapes and mechanical properties of rocks on the propagation of pressure wave along with the tunnels. Additionally, the design loads for the chamber blast doors in a newly-built underground ammunition facility are calculated based on the proposed procedure.
Underground Ammunition Facility;Blast Door;Hydrocode;Blast Mitigation;Fluid-Solid Interaction;
 Cited by
Ministry of National Defense, "Design Guideline for Ammo," DMFC 5-60-30, p. 51, 2011.

J. Lee, Y. Park, G. Kim, T. Lim and Y. Park, "A Basic Study on Upgrading of the Evaluation Factors of the Protective Capacity in Military Protective Facilities," Architectural Institute of Korea, Vol. 22, No. 1, pp. 31-38, 2006.

ROK Army, "Field Manuals 0-1 Strategy," 2013.

ROK Army, "Field Manuals 9-8 Division," 2013.

Defense Installations Agency, "A Study on Reestablishment of Protection Criteria in Contact Area," 2014.

U.S. Army, "Ammunition and Explosives Safety Standards," DA PAM 385-64, p. 346, 2011.

NATO, "AASTP-1 : Manual of NATO Safety Principles for the Storage of Military Ammunition and Explosives," NATO, p. 528, 2010.

Ministry of National Defense, "A Study on Protective Criteria for the Important Military Facilities," 2012.

Consolidated Army Logistics School, "Hazardous Materials Management," 2010.

Ministry of National Defense, Design Guideline to Ammunition Storage, 2012.

ANSYS, "AUTODYN Manuals for Nonlinear Dynamic Simulation," ANSYS, p. 112, 2009.

J. Baek, S. Kim, K. Son and Y. Park, "The Study on Assessment of Protective Capacity of the Reinforced Concrete Box-type Artillery Positions," Journal of the KIMST, Vol. 17, No. 2, pp. 275-281, 2014.

ANSYS, "SpaceClaim Guideline for 3D Modeling," A SpaceClaim Document, p. 60, 2014.

Y. Park, S. Park, H. Eom and K. Son, "The Study on the Protective Capacity of Military Shelters in the Contact Area," Journal of the KIMST, Vol. 18, No. 4, pp. 402-408, 2015.

Y. Park, T. Kim, Y. Yu, and K. Son, "A Study on the Reinforcing Method for the Protective Capacities of Dispersal and Combat Facilities Using Logistic Regression," Journal of Korea Institute of Building Construction, Vol. 16, No. 1, pp. 77-85, 2016 crossref(new window)

J. Park, C. Lim, D. Ryu, K. Son, J. Baek, and Y. Park, "The Design and Protective Capacity Assessment of the Prefabricated PC Arch Ammo Magazines," Journal of the Korea Institute of Building Construction, Vol. 14, No. 6, pp. 615-621, 2014. crossref(new window)

B. Luccioni, D. Ambrosini, G. Nurick, and I. Snyman, "Craters Produced by Underground Explosions," Computers & Structures, Vol. 87, No. 21-22, pp. 21-22, 2009.

A. Cardona, N. Nigro, V. Sonzogni and M. Storti, "Creaters Produced by Underground Explosions," Mecanica Computacional, Vol. 225, pp. 1603-1614, 2006.