JOURNAL BROWSE
Search
Advanced SearchSearch Tips
The Measurement of the Fire and Explosion Properties for 2-Methyl-1-butanol
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
The Measurement of the Fire and Explosion Properties for 2-Methyl-1-butanol
Ha, Dong-Myeong;
  PDF(new window)
 Abstract
For the safe handling of 2-methyl-1-butanol being used in various ways in the chemical industry, the flash point and the autoignition temperature(AIT) of 2-methyl-1-butanol was experimented. And, the lower explosion limit of 2-methyl-1-butanol was calculated by using the lower flash point obtained in the experiment. The flash points of 2-methyl-1-butanol by using the Setaflash and Pensky-Martens closed-cup testers measured and , respectively. The flash points of 2-methyl-1-butanol by using the Tag and Cleveland open cup testers are measured and . The AIT of 2-methyl-1-butanol by ASTM 659E tester was measured as . The lower explosion limit by the measured flash point was calculated as 1.30 Vol.%. It was possible to predict lower explosion limit by using the experimental flash point or flash point in the literature.
 Keywords
2-Methyl-1-butanol;Flash point;Lower Explosion limit;Autoignition temperature (AIT);ASTM E659;
 Language
Korean
 Cited by
 References
1.
Lees, F. P., Loss Prevention in the Process Industries, Vol. 2, 2nd ed., Butterworth-Heinemann, (1996)

2.
Drysdale, D., An Introduction to Fire Dynamics, 2nd ed., Jone Wiley & Sons, (1998)

3.
Lide, D. R., Handbook Chemistry and Physics, 76th ed., CRC Press, (1996)

4.
Dean, J. A., Lange's Handbook of Chemistry, 14th ed. McGraw-Hill, (1992)

5.
KOSHA, /www.kosha.or.kr/msds/msdsMain.do?menuId=69

6.
NFPA, Fire Hazard Properties of Flammable Liquid, Gases, and Volatile Solids, NFPA 325M, National Fire Protection Association, (1991)

7.
Lenga, R. E and Votoupal, K. L., The Sigma Aldrich Library of Regulatory and Safety Data, Volume I-III, Sigma Chemical Company and Aldrich Chemical Company Inc., (1993)

8.
Lewis, R. J., SAX's Dangerous Properties of Industrial Materials, 11th ed., John Wiley & Son, Inc., New Jersey, (2004)

9.
Stephson, R. M., Flash Points of Organic and Orgarnometallic Compounds, Elsevier Science Publishing Co. Inc., (1987)

10.
Hilado, C. J. and S. W. Clark, "Discrepancies and Correlations of Reported Autoignition Temperatures", Fire Technology, 8, 218-227, (1972) crossref(new window)

11.
Ha, D. M., "The Measurement of Combustible Characteristics of n-Undecane", J. of the Korean Institute of Fire Sci. & Eng., 27(2), 11-17, (2013)

12.
Reid, R. C., J. M. Prausnitz and T. K. Sherwood, The Properties of Gases and Liquids, 3th ed. McGraw-Hill, (1977)

13.
Ha, D. M., "The Measurement of Fire and Explosion Properties of n-Pentadecane", J. of the Korean Society of Safety, 28(4), 53-57, (2013) crossref(new window)

14.
Semenov, N .N., Some Problems in Chemical Kinetics and Reactivity, Vol. 2, Princeton University Press, Princeton, N.J., (1959)