JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Modeling of Multi-Stage Hydraulic Fracture Propagation
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Modeling of Multi-Stage Hydraulic Fracture Propagation
Jang, Youngho; Sung, Wonmo;
  PDF(new window)
 Abstract
This paper presents a hydraulic fracture propagation model to describe propagation more realistically. In propagating the hydraulic fractures, we have used two criteria: maximum tangential stress to determine the fracture initiation angle and whether a hydraulic fracture intersects a natural fracture. The model was validated for the parameters relevant to fracture propagation, such as initiation angle and crossing ability through natural fracture. In order to check whether a hydraulic fracture crosses a natural fracture, the model results on crossing state excellently matched with the experimental data. In the sensitivity analysis for direction of maximum horizontal stress, frictional coefficient of fracture interface, and natural fracture orientation, the results show that hydraulic fracture intersects natural fracture, and then, propagated suitably with theoretical results according to fracture interaction criterion. In comparison of this model against vertical fracture approach, it was ascertained that there are discrepancies in fracture connectivity and stimulated reservoir volume.
 Keywords
multiple planar fracture;hydraulic fracture propagation;natural fracture;shale gas reservoir;
 Language
Korean
 Cited by
 References
1.
Kim, J., Chun, M., Jung, W., Park, H., and Sung, W. M., "Optimum design of multi-stage hydraulically fractured multi-horizontal shale gas well using flow regime analysis", Geosci. J., Open access, (2015)

2.
Jin, X., Shah, S. N., and Sheng, M., "Hydraulic Fracturing Model Based on Nonlinear Fracture Mechanics: Theory and Simulation", Paper SPE 159909, presented at the SPE Annual Technical Conference and Exhibition held in San Antonio, Texas, October 8-10, (2012)

3.
Economides, M. J., Nolte, K. G., and Ahmed, U., Reservoir stimulation, 3rd ed., John Wiley & Sons, New York, (1989)

4.
Olson, J. E., "Multi-fracture propagation modeling: Applications to hydraulic fracturing in shales and tight gas sands", Paper ARMA 08-327, presented at the 42nd US Rock Mechanics Symposium and 2nd U.S.-Canada Rock Mechanics Symposium held in San Francisco, California, June 29-July 2, (2008)

5.
Chen, M., Jiang, H., Zhang, G. Q., and Jin, Y., "The Experimental Investigation of Fracture Propagation Behavior and Fracture Geometry in Hydraulic Fracturing through Oriented Perforations", Pet. Sci. Technol., 28(13), 1297-1306, (2010) crossref(new window)

6.
Ispas, I., Eve, R. A., Hickman, R. J., Keck, R. G., Willson, S. M., and Olson, K. E., "Laboratory Testing and Numerical Modelling of Fracture Propagation from Deviated Wells in Poorly Consolidated Formations", Paper SPE 159262, presented at the SPE Annual Technical Conference and Exhibition held in San Antonio, Texas, October 8-10, (2012)

7.
Whittaker, B. N., Singh, R. N., and Sun, G., Rock Fracture Mechanics: Principles, Design and Applications, 400-401, Elsevier Science Ltd., Amsterdam, (1992)

8.
Cooke, M. L. and Underwood, C. A., "Fracture termination and step-over at bedding interfaces due to frictional slip and interface opening", J. Struct. Geol., 23(2-3), 223-238, (2001) crossref(new window)

9.
Blanton, T. L., "An Experimental Study of Interaction Between Hydraulically Induced and Pre-Existing Fractures", Paper SPE 10847, presented at the SPE/DOE Unconventional Gas Recovery Symposium held in Pittsburgh, Pennsylvania, May 16-18, (1982)

10.
Warpinski, N. R. and Teufel, L. W., "Influence of Geologic Discontinuities on Hydraulic Fracture Propagation", J Pet. Technol., 39(2), 209-220, (1987) crossref(new window)

11.
Renshaw, C. E. and Pollard, D. D., "An Experimentally Verified Criterion for Propagation Across Unbounded Frictional Interfaces in Brittle, Linear Elastic Materials", Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 32(3), 237-249, (1995) crossref(new window)

12.
Zhang, X. and Jeffrey, R. G., "The role of friction and secondary flaws on deflection and re-initiation of hydraulic fractures at orthogonal pre-existing fractures", Geophys. J. Int., 166(3), 1454-1465, (2006) crossref(new window)

13.
Thiercelin, M. and Makkhyu, E., "Stress Field In the Vicinity of a Natural Fault Activated By the Propagation of an Induced Hydraulic Fracture", Paper ARMA 07-201, presented at the 1st Canada-U.S. Rock Mechanics Symposium held in Vancouver, Canada, May 27-31, (2007)

14.
Akulich, A. V. and Zvyagin, A. V., "Interaction between Hydraulic and Natural Fractures", Fluid Dyn., 43(3), 428-435, (2008) crossref(new window)

15.
Gu, H. and Weng, X., "Criterion for Fractures Crossing Frictional Interfaces at Non-orthogonal Angles", Paper ARMA 10-198, presented at the 44th US Rock Mechanics Symposium and 5th U.S.-Canada Rock Mechanics Symposium held in Salt Lake City, Utah, June 27-30, (2010)

16.
Savitski, A. A., Lin, M., Riahi, A., Damjanac, B., and Nagel, N. B., "Explicit Modeling of Hydraulic Fracture Propagation in Fractured Shales", Paper IPTC 17073, presented at the International Petroleum Technology Conference held in Beijing, China, March 26-28, (2013)

17.
Erdogan, F. and Sih, G. C., "On the Crack Extension in Plates Under Plane Loading and Transverse Shear", J. Basic Eng., 85(4), 519-525, (1963) crossref(new window)

18.
Jaeger, J. C., Cook, N. G. W., and Zimmerman, R. W., Fundamentals of Rock Mechanics, 4th ed., Blackwell Publishing, Malden, (2007)

19.
Gu, H., Weng, X., Lund, J. B., Mack, M. G., Ganguly, U., and Suarez-Rivera, R., "Hydraulic Fracture Crossing Natural Fracture at Nonorthogonal Angles: A Criterion and Its Validation", SPE Prod. & Oper., 27(1), 20-26, (2012) crossref(new window)

20.
Kohli, A. H. and Zoback, M. D., "Frictional properties of shale reservoir rocks", J. Geophys. Res.-Sol. Ea., 118(9), 5109-5125, (2013)

21.
Jang, Y., Lee, T., Jung, J., Kwon, S., and Sung, W. M., "The oil production performance analysis using discrete fracture network model with simulated annealing inverse method", Geosci. J., 17(4), 489-496, (2013) crossref(new window)