JOURNAL BROWSE
Search
Advanced SearchSearch Tips
An Analysis on Design Error Issues of BIM Conversion Design Projects through Case Studies
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Journal of KIBIM
  • Volume 6, Issue 2,  2016, pp.47-57
  • Publisher : Korean Institute of Building Information Modeling
  • DOI : 10.13161/kibim.2016.6.2.047
 Title & Authors
An Analysis on Design Error Issues of BIM Conversion Design Projects through Case Studies
Kim, Beom-Jun; Ju, Hyung-Woo; Jang, Moon-Seok; Kim, Byeoung-Ju; Chin, Sang-Yoon;
  PDF(new window)
 Abstract
Recently, the introduction and spread of BIM technology has been actively promoted at the domestic level and abroad. However, the BIM adoption and diffusion rate in the whole construction industry has been slower than expected, this is because they applied to construction projects in a way that does not meet the basic objective of BIM adoption. The objective of this paper is to derive a BIM adoption strategy that can provide benefits and efficiency from the design phase, by analyzing issues related to design errors identified in two real world projects based on the 2D to BIM conversion process. Types of issues, type distribution, and degree of BIM contribution to find issues were analyzed in a quantitative way, and then a BIM adoption strategy was derived. As a result, this paper identified that there obviously exists a limit in the 2D to BIM conversion process by repeating the problems that occur in the traditional 2D design process. Therefore, the authors of this paper insist that the design firms should adopt BIM-based design processes, fully, to get financial benefits as well as to improve the design quality.
 Keywords
Building Information Modeling;2D to BIM Conversion Process;Case Study;Design Error Issue;BIM-based 3D Desig;
 Language
Korean
 Cited by
 References
1.
Chin, S. Y. (2015). Is BIM Hazardous or Beneficial? Why Do Design Firms Still Hesitate to Adopt BIM?, The Architectural Culture News, March 1st, 2015.

2.
Choi, C. H. (2012). What Kind of BIM Do Your Company Use?, CAD&Graphics, April, 2012, pp. 42-43.

3.
Choi, J. S., Kim, I. H. (2013). Development of Check-list for BIM Based Architectural Design Quality Check, Transactions of the Society of CAD/CAM Engineers, 18(3), pp. 177-188. crossref(new window)

4.
Chun, J. Y., Oh, S. J. (2003). Constitutional Directions of Decision Support Process for Cooperative Design in Architectural Design Phase, Journal of the Architectural Institute of Korea Planning & Design, 19(11), pp. 173-180.

5.
Her, B. (2011). Design Error Classification and Causation in BIM Design, Master's Thesis, Sejong University, Seoul, Republic of Korea, 81 pages.

6.
Ju, H. W., Kim, B. J., Chin, S. Y. (2015). A Study on CM Business Direction in the Design Phase through the Analysis of BIM Checklist, The Korea Institute of Building Information Modeling Conference, 5(1), pp. 105-106.

7.
Kang, H. K., Lee, Y. H., Lee, J. Y., Kwon, O. S., Park, S. J., Lee, A. Y. (2010). Case Study for the Design Review Process Using BIM in CM Project, Korea Institute of Construction Engineering and Management Conference, pp. 393-394.

8.
Kim, B. J., Jung, C. W., Kim, B. J., Kim, I. C., Oh, H. J., Chin, S. Y. (2016). A Study of the Issue Type of BIM Conversion Design Project, The Korea Institute of Building Information Modeling Conference, 6(1), pp. 89-92.

9.
Kim, B. S., Kim, K. J., Chun, J. K., Kang, L. S. (2004). A Study on Reduce Scheme of Design Error in Turn-Key Projects, Journal of the Korean Society of Civil Engineers, 24(2), pp. 275-283.

10.
Kim, J. H. (2008). The Constitution Plan of Design Error Management System in Construction Projects, Journal of the Regional Association of Architectural Institute of Korea, 10(3), pp. 231-238.

11.
Kwon, O. C., Jo, C. W. (2011). Proposal of BIM Quality Management Standard by Analyzing Domestic and International BIM Guides, Journal of Korea Institute of Building Construction, 11(3), pp. 265-275. crossref(new window)

12.
Lee, N. J., Son, M. J., Kim, J. H., Ji, S. M., Hyun, C. T. (2011). Development of Construction Documents Checklist for Preventing Error of Design Process in Public Construction Projects, Journal of the Architectural Institute of Korea Structure & Construction, 27(2), pp. 149-158.

13.
Lee, S. I., Han, J. S., Jo, C. W. (2015). A Basic Study on Property Structure Standardization based on BIM Information Framework, Journal of the Architectural Institute of Korea Planning & Design, 31(5), pp. 77-85.

14.
Lopez, R., Love, P., Edwards, D., Davis, P. (2010). Design Error Classification, Causation, and Prevention in Construction Engineering, Journal of Performance of Constructed Facilities, 24(4), pp. 399-408. crossref(new window)

15.
Park, K. H. (2011). A Study on the Effect of Pre-Detecting Errors Using BIM in the Pre-Construction Phase, Ph.D. Thesis, Yonsei University, Seoul, Republic of Korea, 96 pages.

16.
Public Procurement Service. (2007). Construction Delivery Handbook, Public Procurement Service, December, 2007.

17.
Public Procurement Service. (2015). (2014-9) Expansion of BIM Application for Customized Services (Proceeding), , June 1st, 2015.

18.
Seo, J. C., Kim, H. J., Kim, I. H. (2012). Open BIM-based Quality Control for Enhancing the Design Quality in the Architectural Design Phase, Korean Journal of Construction Engineering and Management, 13(4), pp. 3-15.

19.
Yang, H. M., Lee, S. H., Jun, H. J. (2011). A Study on the Development of BIM Template Prototype for small and medium sized Architectural Design Firms, Info Design Issue, 10(6), pp. 105-120.