JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Evaluation of Flexural Properties of Indirect Gum-Shade Composite Resin for Esthetic Improvement
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Journal of dental hygiene science
  • Volume 15, Issue 4,  2015, pp.407-412
  • Publisher : the Korean Society of Dental Hygiene science
  • DOI : 10.17135/jdhs.2015.15.4.407
 Title & Authors
Evaluation of Flexural Properties of Indirect Gum-Shade Composite Resin for Esthetic Improvement
Im, Yong-Woon; Hwang, Seong-Sig;
  PDF(new window)
 Abstract
This study investigated flexural properties of indirect Gum-shade composite resins for esthetic improvement. The material utilized in this study was Crea.lign, Twiny flow and Twiny paste (TP). Ten specimens were fabricated with a dimension of according to the ISO 4049. After fabrications, specimens were stored in the distilled water for 24 hours at the temperature of . Three-point bending test was performed in universal testing machine (Instron 3344; Instron, USA) at a crosshead speed of 1 mm/min until the failure occurred. TP exhibited a higher flexural strength (FS) and flexural modulus (FM) compared to the flowable materials. There were significant differences among the three materials in FS and FM. However, there was no significant difference in work of fracture (WOF) in all tested materials (p>0.05). In Weibull analysis, TP showed the greatest Weibull modulus which means a higher reliability of the materials. Also, Gum-shade composite resins revealed a strong correlation in all flexural properties. There was a positive correlation in FS-FM () and a negative correlation between FS-WOF and FM-WOF (>). Therefore, this confirmed that flexural property was important for mechanical behavior evaluation and useful information. To addition, this improved among mechanical properties correlation of materials as important factor.
 Keywords
Flexural properties;Flexural strength;Gum-shade composite resin;Weibull analysis;
 Language
Korean
 Cited by
 References
1.
Ichiwata T, Ueda K, Takeda T, et al.: Research into the colors of denture base resin-influence of differences in shade and thickness. J Nihon Univ Sch Dent 26: 30-38, 1984. crossref(new window)

2.
Balchin EJ: The use of acrylic stains to retain shade harmony in dentures. Dent Tech 36: 30-41, 1983.

3.
Yim SH, Kim JH: Esthetically improved complete denture by gingival shade alteration: a case report. J Korean Acad Prosthodont 52: 239-245, 2014. crossref(new window)

4.
ISO 4049: Dentistry-polymer-based filling, restorative and luting materials. International Organization for Standardization, Geneva, Switzerland, pp.15-17, 2000.

5.
Jun SK, Kim DA, Goo HJ, Lee HH: Investigation of the correlation between the different mechanical properties of resin composites. Dent Mater J 32: 48-57, 2013. crossref(new window)

6.
Lee HH, Lee CJ, Asaoka K: Correlation in the mechanical properties of acrylic denture base resins. Dent Mater J 31: 157-164, 2012. crossref(new window)

7.
Bayne S, Thompson JF, Roberson JF, et al.: Sturdevant's art and science of operative dentistry. 5th ed. Mosby, St. Louis, pp.144-145, 2006.

8.
Wang L, D'Alpino PH, Lopes LG: Mechanical properties of dental restorative materials: relative contribution of laboratory tests. J Appl Oral Sci 11: 162-167, 2003. crossref(new window)

9.
Rodrigues SA Jr, Ferracane JL, Della Bona A: Flexural strength and Weibull analysis of a microhybrid and a nanofill composite evaluated by 3- and 4-point bending tests. Dent Mater 24: 426-431, 2008. crossref(new window)

10.
Kim KS, Yoon TH, Song KY, Ahn SG: Comparison of mechanical properties in 4 indirect composite resin. J Korean Acad Prosthodont 45: 21-33, 2007.

11.
Tyas MJ: Correlation between fracture properties and clinical performance of composite resins in Class IV cavities. Aust Dent J 35: 46-49, 1990. crossref(new window)