JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Applicability Estimation of Ballast Non-exchange-type Quick-hardening Track Using a Layer Separation Pouring Method
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Applicability Estimation of Ballast Non-exchange-type Quick-hardening Track Using a Layer Separation Pouring Method
Lee, Il Wha; Jung, Young Ho; Lee, Min Soo;
  PDF(new window)
 Abstract
Quick-hardening track (QHT) is a construction method which is used to change from old ballast track to concrete track. Sufficient time for construction is important, as the construction should be done during operational breaks at night. Most of the time is spent on exchanging the ballast layer. If it is possible to apply the ballast non-exchange type of quick-hardening track, it would be more effective to reduce the construction time and costs. In this paper, pouring materials with high permeability are suggested and a construction method involving a layer separation pouring process considering the void condition is introduced in order to develop ballast non-exchange type of QHT. The separate pouring method can secure the required strength because optimized materials are poured into the upper layer and the lower layer for each void ratio condition. To ensure this process, a rheology analysis was conducted on the design of the pouring materials according to aggregate size, the aggregate distribution, the void ratio, the void size, the tortuosity and the permeability. A polymer series was used as the pouring material of the lower layer to secure the void filling capacity and for adhesion to the fine-grained layer. In addition, magnesium-phosphate ceramic (MPC) was used as the pouring material of the upper layer to secure the void-filling capacity and for adhesion of the coarse-grained layer. As a result of a mechanics test of the materials, satisfactory performance corresponding to existing quick-hardening track was noted.
 Keywords
Quick hardening track;Ballast;Non-exchanging type;Track structure improvement;Void ratio;
 Language
Korean
 Cited by
 References
1.
I.W. Lee (2006) Optimal design of cement mortar pouring type paved track, Journal of the Korean Society for Railway, 9(3), pp. 305-312.

2.
M. Leva, M. weintraub, M. Grummer, M. Pollchik, and H. H. Storch (1951) Fluid Flow through Packed and Fluidized systems, Bulletin 504, Bureau of Mines.

3.
M.N. Abbas (2011) Modeling of porosity equation for water flow through packed bed Of monosize spherical packing, Journal of engineering and development, 15(4), pp. 205-226.

4.
P Clover (2008) Petrophysics MSc Course Note, Imperial College, London, pp.10-20.

5.
C.C. Furnas (1931) Mathematical relations for beds of broken solids of maximum density, Industrial and Engineering Chemistry Research, 23, pp. 1052-1058. crossref(new window)

6.
E. Scheidegger (1974) The physics of flow through porous media (3rd ed.), University of Toronto Press, Canada, pp. 14-39.

7.
Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading), ASTM C293

8.
H.W. Cho, H.S. Shin, L.H. Lee (2013) Strength development of magnesia-phosphate cement considering borax ratio and curing temperature, Korea Concrete Institute proceedings of spring conference, Yeosu, 26(1), pp.333-335.