JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Construction Management Method for Asphalt Paving Using Ground Penetrating Radar and an Infrared Camera
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Construction Management Method for Asphalt Paving Using Ground Penetrating Radar and an Infrared Camera
Baek, Jongeun; Park, Hee Mun; Yoo, Pyung Jun; Im, Jae Kyu;
  PDF(new window)
 Abstract
PURPOSES : The objective of this study is to propose a quality control and quality assurance method for use during asphalt pavement construction using non-destructive methods, such as ground penetrating radar (GPR) and an infrared (IR) camera. METHODS : A 1.0 GHz air-coupled GPR system was used to measure the thickness and in situ density of asphalt concrete overlay during the placement and compaction of the asphalt layer in two test construction sections. The in situ density of the asphalt layer was estimated based on the dielectric constant of the asphalt concrete, which was measured as the ratio of the amplitude of the surface reflection of the asphalt mat to that of a metal plate. In addition, an IR camera was used to monitor the surface temperature of the asphalt mat to ensure its uniformity, for both conventional asphalt concrete and fiber-reinforced asphalt (FRA) concrete. RESULTS : From the GPR test, the measured in situ air void of the asphalt concrete overlay gradually decreased from 12.6% at placement to 8.1% after five roller passes for conventional asphalt concrete, and from 10.7% to 5.9% for the FRA concrete. The thickness of the asphalt concrete overlay was reduced from 7.0 cm to 6.0 cm for the conventional material, and from 9.2 cm to 6.4 cm for the FRA concrete. From the IR camera measurements, the temperature differences in the asphalt mat ranged from to in the two test sections. CONCLUSIONS : During asphalt concrete construction, GPR and IR tests can be applicable for monitoring the changes in in situ density, thickness, and temperature differences of the overlay, which are the most important factors for quality control. For easier and more reliable quality control of asphalt overlay construction, it is better to use the thickness measurement from the GPR.
 Keywords
ground penetrating radar;infrared camera;asphalt pavement;construction;QC/QA;
 Language
Korean
 Cited by
 References
1.
Al-Qadi, I. L. and Lahouar, S. (2005) Measuring layer thickness with GPR - Theory to practice, Construction and Building Materials, Vol. 19. pp. 763-772. crossref(new window)

2.
Chang, C.-H., Chen, J.-S., and Wu, T.-B. (2011) Dielectric modeling of asphalt mixtures and relationship with density, Journal of Transportation Engineering, Vol. 137, No. 2, pp.104-111. crossref(new window)

3.
Chen, D.-H., Hong, F., Zhou, W., and Ying, P. (2014) Estimating the Hot-Mix Asphalt Air Voids from Ground Penetrating Radar, NDT&E International, Vol. 68, pp. 120-127. crossref(new window)

4.
Hwang, S.D. (2014) Development of Construction Quality Control Standard and Maintenance Guideline to Prevent Pothole in Asphalt Pavements, Korea Institute of Construction and Building Technology.

5.
Lahouar, S., Al-Qadi, I. L., Loulizi, A., Clark, T. M., and Lee, D. T. (2002) Approach to Determining In Situ Dielectric Constant of Pavements: Development and Implementation at Interstate 81 in Virginia, Transportation Research Record, No. 1806, pp. 81-87.

6.
Leng, Z. (2011) Prediction of In-Situ Asphalt Mixture Density Using Ground Penetrating Radar: The Theoretical Development and Field Verification, Ph.D. Thesis, University of Illinois at Urbana-Champaign, USA.

7.
Milovanovi, B., Domitrovic, J., and Rukavina, T. (2012) Application of Infrared Camera for Quality Control during Paving, Presented at 2nd International Conference on Road and Rail Infrastructure, May 7-9, 2012, Dubrovnik, Croatia.

8.
Saarenketo, T. (2014) Measuring Electromagnetic Properties of Asphalt for Pavement Quality Control and Defect Mapping. Retrieved December 15, 2014, from http://www.vegagerdin.is/nvf33.nsf/0/6423655ed26a5bd400256de90031ecaf/$FILE/Asphalt_electromagnetics_TimoS_030603.pdf

9.
Sebesta, S. and Scullion, T. (2002) Using Infrared Imaging and Ground-Penetrating Radar to Detect Segregation in Hot-Mix Overlays, Report 4126-1. Texas A&M Transportation Institute, College Station, Texas, USA.

10.
Sebesta, S., Scullion, T. and Saarenketo, T. (2013) Using Infrared and High-Speed Ground-Penetrating Radar for Uniformity Measurements on New HMA Layers, SHRP 2 Report S2-R06C-RR-1, Transportation Research Board, Washington, D.C., USA.

11.
Sebesta, S., Wang, F., Scullion, T., and Liu, W. (2006) New Infrared and Radar Systems for Detecting Segregation in Hot-Mix Asphalt Construction, Report FHWA/TX-05/0-4577-2, Texas Transportation Institute, Texas, USA.

12.
Shangguan, P., Al-Qadi, I. M., Leng, Z., Schmitt, R. L., and Faheem, A. (2013) Innovative Approach for Asphalt Pavement Compaction Monitoring with Ground-Penetrating Radar, Transportation Research Record, No. 2347, pp. 79-87.

13.
Solla, M., Lsguela, S., Gonzalez-Jorge, H., and Arias, P. (2014) Approach to Identify Cracking in Asphalt Pavement using GPR and Infrared Thermographic Methods: Preliminary Findings. NDT&E International, Vol. 62, pp. 55-65. crossref(new window)

14.
Yoo, P.J. and Kim, T.W. (2014) Physical Characteristics of Glassfiber reinforced asphalt mixture, Proceedings of 2014 Korea Society of Road Engineers Fall Conference, pp. 78.