Advanced SearchSearch Tips
FDI performance Analysis of Inertial Sensors on Multiple Conic Configuration
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
FDI performance Analysis of Inertial Sensors on Multiple Conic Configuration
Kim, Hyun Jin; Song, Jin Woo; Kang, Chul Woo; Park, Chan Gook;
  PDF(new window)
Inertial sensors are important components of navigation system whose performance and reliability can be improved by specific sensor arrangement configuration. For the reliability of the system, Fault Detection and Isolation (FDI) is conducted by comparing each signal of arranged sensors and many arrangement configuration were suggested to optimize FDI performance of the system. In this paper, multiple conic configuration is suggested with optimal navigation condition and its FDI performance is analyzed by established Figure Of Merit (FOM) under the condition for navigation optimality. From FOM comparison, the multiple conic configuration is superior to former one in point of FDI.
Fault Detection and Isolation;Figure of Merit;Inertial Sensor;Multiple Conic Configuration;
 Cited by
Cho, S. Y., Park, C. G. and Lee, D. H., "Calibration of Redundant IMU with Low-grade Inertial Sensors," Journal of the Korean Society for Aeronautical & Space Sciences, vol. 32, no. 10, 2004, pp.418-426.

Lee, W. and Park, C. G., "A Fault Detection Method of Redundant IMU Using Modified Principal Component Analysis," International Journal of Aeronautical and Space Sciences, vol. 13, Sep. 2012, pp.398-404. crossref(new window)

Lee, W. and Park, C. G., "Double Fault Detection of Cone-Shaped Redundant IMUs Using Wavelet Transformation and EPSA," Sensors, vol. 14, Feb. 2014, pp.3428-3444. crossref(new window)

Wilcox, J. C., "Competitive Evaluation of Failure Detection Algorithms for Strapdown Redundant Inertial Instruments," Journal of Spacecraft, Vol. 11, No. 7, Jul. 1974, pp.525-530. crossref(new window)

Harrison, J. V. and Gai G., "Evaluating Sensor Orientations for Navigation Performance and Failure Detection" IEEE Transactions on Aerospace and Electronic Systems, Vol. AES-13, No. 6, Nov. 1977, pp.631-643. crossref(new window)

Kim, J. Y., Yang, C. K. and Shim, D. S., "Navigation and Fault Detection Performance Analysis for INS Redundant Sensor Configurations," Journal of Control, Automation and Systems Engineering, vol. 8, no. 8, Aug. 2002, pp.698-705. crossref(new window)

Yoon, S. et al, "Experimental Evaluation of Fault Diagnosis in a Skew-Configured UAV Sensor System," Control Engineering Practice, vol. 19, no. 2, Feb. 2011, pp.153-173.

Kim, K. H. et al, "Optimal IMU Configuration for a SDINS," Proceedings of 2001 International Conference on Control, Automation and Systems, 2011, pp.2130-2133.

Park, S. K. et al, "Optimal Configuration for TDOF Inertial Sensors and FDI Technique", Proceedings of 2004 KSAS Spring Conferences, 2004, pp.283-287.

Jeerage, M. K., "Reliability Analysis of Fault-Tolerant IMU Architectures with Redundant Inertial Sensors," Position, Location and Navigation Symposium (IEEE PLANS '90), 1990, pp.587-592.

Guerrier, S., "Improving Accuracy with Multiple Sensors: Study of Redundant MEMS-IMU/GPS Configurations," Proceedings of the 22nd International Technical Meeting of the Satellite Division of the Institute of Navigation (ION GNSS 2009), 2009, pp.3114-3121.

Yuksel, Y. and El-Sheimy, N., "An Optimal Sensor Fusion Method for Skew Redundant Inertial Measurement Units," Journal of Applied Geodesy, vol. 5, no. 2, Aug. 2011, pp.99-115.

Guerrier, S., Waegli, J. and Victoria, M., "Fault Detection and Isolation in Multiple MEMS-IMUs Configurations", IEEE Transaction on Aerospace and Electronic Systems, Vol. 48, No. 3, 2012, pp.2015-2031. crossref(new window)

Bittner, D. E., Christian, J. A., Bishop, R. H. and May, D., "Fault Detection, Isolation, and Recovery Techniques for Large Clusters of Inertial Measurement Units", Position, Location and Navigation Symposium (IEEE PLANS 2014), 2014, pp.219-229.

Potter, J. E. and Deckert, J. C., "Minimax Failure Detection and Identification in Redundant Gyro and Accelerometer Systems," Journal of Spacecraft and Rockets, vol. 10, no. 4, 1973, pp.236-243. crossref(new window)

R. Hanson and M. Pachter, "Optimal Gyro-Free IMU geometry," AIAA guidance, navigation, and control conference and exhibit, 2005, pp.15-18.

Jin, H. and Zhang, H. Y., "Optimal Parity Vector Sensitive to Designated Sensor fault," IEEE Transactions on Aerospace and Electronic Systems, vol. 35, no. 4, Oct. 1999, pp. 1122-1128. crossref(new window)

Grigorie, T. L. and Botez, R. M., "A New Method to Reduce the Noise of the Miniaturised Inertial Sensors Disposed in Redundant Linear Configurations," Aeronautical Journal, vol. 117, no. 1188, Feb. 2013, pp.111-132. crossref(new window)

Shim, D. S. and Yang, C. K., "Optimal Configuration of Redundant Inertial Sensors for Navigation and FDI performance," Sensors, vol. 10, Jul. 2010, pp.6497-6512. crossref(new window)