Advanced SearchSearch Tips
Conceptual Design of a Ducted Fan for Helicopter Anti-Torque System
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Conceptual Design of a Ducted Fan for Helicopter Anti-Torque System
Hwang, Chang-Jeon;
  PDF(new window)
Ducted fans have advantages in noise as well as operational safety aspects compared to conventional tail rotors and are used as an anti-torque system for various classes of helicopters. The final goal of this study is to develop a ducted fan anti-torque system which can replace conventional tail rotors of existing helicopters to achieve safety enhancement and low noise level. In this paper, a conceptual design process and the results are described. Initially, the design requirement and the design parameter characteristics are analysed, and then initial sizing and configuration design are performed. There are several configuration changes due to specific technical reasons in each case. Finally, the required power and the pitch link load are predicted as an initial estimation. The conceptual design technique for the ducted fan in this study can be easily applied to the design of other ducted fans such as the lift fan for unmanned aerial vehicle.
Tail Fan;Conceptual Design;Anti-Torque System;Helicopter;
 Cited by
Vialle, M. & Arnaud, G., 1993, 'A New Generation of Fenestron Fan-in-Fin Tail Rotor on EC135', The 19th European Rotorcraft Forum Proceedings

Mouille, R., 1970, 'The 'Fenestron' Shrouded Tail Rotor of the SA.341 Gazelle', J. of AHS, Vol. 15, No.4

Vuillet, A. & Morelli, F., 1987, 'New Aerodynamic Design of the Fenestron for Improved Performance', AGARD-CP-423

Allongue, M. et al., 1999, 'The Quiet Helicopter-From Research To Reality', The 55th AHS Annual Forum Proceedings

Bourtsev, B.N. & Selemenev, S.V., 2000, 'Fan-in-Fin Performance at Hover Computational Method', The 26th European Rotorcrait Forum Proceedings

Rajagopalan, R.G. & Keys, C.N., 1997, 'Detailed Aerodynamic Ana;ysis of the RAH-66 FANTAIL Using CFD', J. of AHS

Bandoh, S. et al., 1998, 'The Ducted Tail Rotor System of the New Observation Helicopter(XOH-1)', Heli Japan 98

Andrew, J.R III et al., 1996, 'Design and Testing of a Ducted Tail Rotor Concept Demonstrator for a Model 222U Helicopter', The 22nd European Rotorcraft Forum Proceedings

Joo, G. et al., 2002, 'Technology Development of Helicopter Anti-Torque System(l)', Annual Report (In Korean)

Prouty, R.W., 1986, 'Helicopter Performance, Stability and Control', PWS Publishers

Lynn, R.R. et al., 1970, 'Tail Rotor Design Part I : Aerodynamics', J. of AHS

FAR Pt.29, 2000, 'Airworthiness Standards: Transport Category Rotorcraft'.

MIL-F-83300, 1970, 'Flying Qualities of Piloted V/STOL Aircraft'.

ADS 33E PRF, 1996, 'Performance Specification : Handling Qualities Requirements for Military Rotorcraft'

Lee, H.D. and Kwon, O., 2002, 'Data Provision for the 1st Ducted Fan Airload', ATS-KAIST-01-006 (In Korean)

Ahn, J. et al., 2003, 'Performance Prediction and Design Study of a Ducted Fan System', KSAS Spring Conference (In Korean)

Noonan, K.W. et al., 1977, 'Two Dimensional Aerodynamic Characteristics of Several Rotorcraft Airfoils at Mach Numbers from 0.35 to 0.9', NASA TM X 73990