Publisher : The Korean Society for Aeronautical & Space Sciences
DOI : 10.5139/IJASS.2009.10.2.086
Title & Authors
Development of a Point Tracking System for Measuring Structural Deformations Using Commercial Video Cameras Kim, Hong-Il; Kim, Ho-Young; Park, Hyun-Jin; Han, Jae-Hung; Kim, Jun-Bum; Kim, Do-Hyung; Han, Jeong-Ho;
This paper deals with the creation of a new, low-cost point/position tracking system that can measure deformations in engineering structures with simple commercially widespread cameras. Though point tracking systems do exist today, such as Stereo Pattern Recognition (SPR) and Projection Moir Interferometry (PMI) systems, they are far too costly to use to analyze small, simple structures because complex optical components such as large flashes, high-resolution cameras and data acquisition systems with several computers are required. We developed a point tracking system using commercial cameras. This system used IR LEDs and commercial IR CCD cameras to minimize the interference posed by other extraneous light sources. The main algorithm used for this system is an optical point tracking algorithm, which is composed of the point extraction algorithm and the point matching algorithm for 3-D motion estimation. a series of verification tests were performed. Then, the developed point tracking system was applied to measure deformations of an acrylic plate under a mechanical load. The measured deformations of the acrylic plate matched well with the numerical analysis results. The results indicate that the developed point tracking system is reliable enough to measure continuous deformed shapes of various engineering structures.
3-D position estimation algorithm;Specific point extraction algorithm;SPR(Stereo Pattern Recognition);Commercial cameras;
Performance evaluation method of homogeneous stereo camera system for full-field structural deformation estimation, International Journal of Aeronautical and Space Sciences, 2015, 16, 3, 380
R. K. van der Draai, R. P. M. van Schinkel and A. Telesca, “A new approach to measuring model deflection“ , 18th International Congress on Instrumen- tation in Aerospace Simulation Facilities, pp. 33/1-pp. 33/7, 1999
G. A. Fleming and S. A. Gorton, “Measurement of Rotorcraft Blade Deformation using Projection Moiré Interferometry”, Proceedings of SPIE, Vol. 3411, pp. 514-527, 1998
G. A. Fleming, S. M. Bartman, M. R. Waszak and L. N. Jenkins, “Projection moiré interferometry measurements of micro air vehicle wings”, Proceedings of SPIE, Vol. 4448, pp. 90-101, 2001
O. Schneider, “Analysis of SPR measurements form HART II “, Aerospace Science and Technology, Vol. 9, pp. 409-420, 2005
Camera Calibration Toolbox for MATLAB, http://www.vision.caltech.edu/bouguetj/calib_doc/
R. Hartly and A. Zesserman, Multiple View Geometry in Computer Vision, Cambridge Press, 2003.