Advanced SearchSearch Tips
Experimental Framework for Controller Design of a Rotorcraft Unmanned Aerial Vehicle Using Multi-Camera System
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Experimental Framework for Controller Design of a Rotorcraft Unmanned Aerial Vehicle Using Multi-Camera System
Oh, Hyon-Dong; Won, Dae-Yeon; Huh, Sung-Sik; Shim, David Hyun-Chul; Tahk, Min-Jea;
  PDF(new window)
This paper describes the experimental framework for the control system design and validation of a rotorcraft unmanned aerial vehicle (UAV). Our approach follows the general procedure of nonlinear modeling, linear controller design, nonlinear simulation and flight test but uses an indoor-installed multi-camera system, which can provide full 6-degree of freedom (DOF) navigation information with high accuracy, to overcome the limitation of an outdoor flight experiment. In addition, a 3-DOF flying mill is used for the performance validation of the attitude control, which considers the characteristics of the multi-rotor type rotorcraft UAV. Our framework is applied to the design and mathematical modeling of the control system for a quad-rotor UAV, which was selected as the test-bed vehicle, and the controller design using the classical proportional-integral-derivative control method is explained. The experimental results showed that the proposed approach can be viewed as a successful tool in developing the controller of new rotorcraft UAVs with reduced cost and time.
Experimental framework;Multi-camera system;Rotorcraft unmanned aerial vehicle;Three-degree of freedom flying mill;
 Cited by
Alexander, H. L. (1991). State estimation for distributed systems with sensing delay. Data Structures and Target Classification, Orlando, FL. pp. 103-111.

Bouabdallah, S., Murrieri, P., and Siegwart, R. (2004). Design and control of an Indoor micro quadrotor. Proceedings-2004 IEEE International Conference on Robotics and Automation, New Orleans, LA. pp. 4393-4398. crossref(new window)

Bouabdallah, S. and Siegwart, R. (2005). Backstepping and sliding-mode techniques applied to an indoor micro Quadrotor. IEEE International Conference on Robotics and Automation, Barcelona, Spain. pp. 2247-2252.

Escareno, J., Sanchez, A., Garcia, O., and Lozano, R. (2008). Triple tilting rotor mini-UAV: Modeling and embedded control of the attitude. American Control Conference, Seattle, WA. pp. 3476-3481.

Fowers, S. G., Lee, D. J., Tippetts, B. J., Lillywhite, K. D., Dennis, A. W., and Archibald, J. K. (2007). Vision aided stabilization and the development of a quad-rotor micro UAV. IEEE International Symposium on Computational Intelligence in Robotics and Automation, Jacksonville, FL. pp. 143-148. crossref(new window)

Franklin, G. F., Powell, J. D., and Emami-Naeini, A. (2002). Feedback Control of Dynamic Systems. 4th ed. Upper Saddle River, NJ: Prentice Hall.

Hoffmann, G. M., Huang, H., Waslander, S. L., and Tomlin, C. J. (2007). Quadrotor helicopter flight dynamics and control: theory and experiment. AIAA Guidance, Navigation, and Control Conference, Hilton Head, SC. pp. 1670-1689.

Johnson, E. N. and Schrage, D. P. (2003). The Georgia Tech unmanned aerial research vehicle: GTMaxv. AIAA Guidance, Navigation, and Control Conference, Austin, TX. pp. AIAA Paper 2003-5741.

Johnson, E. N. and Turbe, M. A. (2005). Model, control, and flight testing of a small ducted fan aircraft. AIAA Guidance, Navigation, and Control Conference, San Francisco, CA. pp. AIAA Paper 2005-6281.

Larsen, T. D., Andersen, N. A., Ravn, O., and Poulsen, N. K. (1998). Incorporation of time delayed measurements in a discrete-time Kalman filter. 37th Proceedings of the IEEE Conference on Decision and Control, Tampa, FL. pp. 3972-3977. crossref(new window)

Oh, H. (2010). Vision-Based Navigation for an Indoor UAV Using Multi-Camera System. MS Thesis, Korea Advanced Institute of Science and Technology.

Oh, H., Won, D., Huh, S., Park, B., Shim, D. H., and Tahk, M. (2009). Indoor UAV pose estimation from multicamera system using EKF. 2nd International Symposium on Unmanned Aerial Vehicles, Reno, NV.

Romero, H., Salazar, S., Sanchez, A., and Lozano, R. (2007). A new UAV configuration having eight rotors: dynamical model and real-time control. 46th IEEE Conference on Decision and Control, New Orleans, LA. pp. 6418-6423. crossref(new window)

Shim, D. H., Kim, H. J., and Sastry, S. (2000). Hierarchical control system synthesis for rotorcraft-based unmanned aerial vehicles. AIAA Guidance, Navigation, and Control Conference, Denver, CO.

Stevens, B. L. and Lewis, F. L. (1992). Aircraft Control and Simulation. New York: Wiley.

Sun, D. and Crassidis, J. L. (2002). Observability analysis of six-degree-of-freedom configuration determination using vector observations. Journal of Guidance, Control, and Dynamics, 25, 1149-1157. crossref(new window)

Thomopoulos, S. C. A. and Zhang, L. (1994). Decentralized filtering with random sampling and delay. Information Sciences, 81, 117-131. crossref(new window)

Valenti, M., Bethke, B., Dale, D., Frank, A., McGrew, J., Ahrens, S., How, J. P., and Vian, J. (2007). The MIT indoor multi-vehicle flight testbed. IEEE International Conference on Robotics and Automation, Rome, Italy. pp. 2758-2759. crossref(new window)

Yoshihata, Y., Watanabe, K., Iwatani, Y., and Hashimoto, K. (2007). Multi-camera visual servoing of a micro helicopter under occlusions. IEEE/RSJ International Conference on Intelligent Robots and Systems, San Diego, CA. pp. 2615-2620. crossref(new window)