Advanced SearchSearch Tips
Development of a Peristaltic Micropump with Lightweight Piezo-Composite Actuator Membrane Valves
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of a Peristaltic Micropump with Lightweight Piezo-Composite Actuator Membrane Valves
Pham, My; Goo, Nam-Seo;
  PDF(new window)
A peristaltic micropump with lightweight piezo-composite actuator (LIPCA) membrane valves is presented. The micropump contained three cylinder chambers that were connected by microchannels and two active membrane valves. A circular miniature LIPCA was developed and manufactured to be used as actuating diaphragms. The LIPCA diaphragm acted as an active membrane valve that alternate between open and closed positions at the inlet and outlet in order to produce high pumping pressure. In this LIPCA, a lead zirconium titanate ceramic with a thickness of 0.1 mm was used as an active layer. The results confirmed that the actuator produced a large out-of-plane deflection. During the design process, a coupled field analysis was conducted in order to predict the actuating behavior of the LIPCA diaphragm; the behavior of the actuator was investigated from both a theoretical and experimental perspective. The active membrane valve concept was introduced as a means for increasing pumping pressure, and microelectromechanical system techniques were used to fabricate the peristaltic micropump. The pumping performance was analyzed experimentally in terms of the flow rate, pumping pressure and power consumption.
Peristaltic micropump;Piezoelectric actuator;Lightweight piezo-composite actuator;Polydimethylsiloxane;Drug delivery system;
 Cited by
Experimental Study on the Performance of a Bidirectional Hybrid Piezoelectric-Hydraulic Actuator,;;;;;;;;

International Journal of Aeronautical and Space Sciences, 2015. vol.16. 4, pp.520-528 crossref(new window)
Experimental Study on the Performance of a Bidirectional Hybrid Piezoelectric-Hydraulic Actuator, International Journal of Aeronautical and Space Sciences, 2015, 16, 4, 520  crossref(new windwow)
Design and fabrication of a 3D printed miniature pump for integrated microfluidic applications, International Journal of Precision Engineering and Manufacturing, 2017, 18, 9, 1287  crossref(new windwow)
Bhattacharya, S., Datta, A., Berg, J. M., and Gangopadhyay, S. (2005). Studies on surface wettability of poly(dimethyl) siloxane (PDMS) and glass under oxygen-plasma treatment and correlation with bond strength. Journal of Microelectromechanical Systems, 14, 590-597. crossref(new window)

Cao, L., Mantell, S., and Polla, D. (2001). Design and simulation of an implantable medical drug delivery system using microelectromechanical systems technology. Sensors and Actuators A: Physical, 94, 117-125. crossref(new window)

Chow, W. W. Y., Lei, K. F., Shi, G., Li, W. J., and Huang, Q. (2006). Microfluidic channel fabrication by PDMS-interface bonding. Smart Materials and Structures, 15, S112-S116. crossref(new window)

Doll, A., Heinrichs, M., Goldschmidtboeing, F., Schrag, H. J., Hopt, U. T., and Woias, P. (2006). A high performance bidirectional micropump for a novel artificial sphincter system. Sensors and Actuators A: Physical, 130-131, 445-453. crossref(new window)

Jacot, D., Calkins, T., and Mabe, J. (2001). Boeing Active Flow Control System (BAFCS)-II. Proceedings of SPIE, 4332, 317-325. crossref(new window)

Jang, L. S., Li, Y. J., Lin, S. J., Hsu, Y. C., Yao, W. S., Tsai, M. C., and Hou, C. C. (2007). A stand-alone peristaltic micropump based on piezoelectric actuation. Biomedical Microdevices, 9, 185-194. crossref(new window)

Jo, B. H., Van Lerberghe, L. M., Motsegood, K. M., and Beebe, D. J. (2000). Three-dimensional micro-channel fabrication in polydimethylsiloxane (PDMS) elastomer. Journal of Microelectromechanical Systems, 9, 76-81. crossref(new window)

Kim, J. H., Kang, C. J., and Kim, Y. S. (2004). A disposable polydimethylsiloxane-based diffuser micropump actuated by piezoelectric-disc. Microelectronic Engineering, 71, 119-124. crossref(new window)

Laser, D. J. and Santiago, J. G. (2004). A review of micropumps. Journal of Micromechanics and Microengineering, 14, R35-R64. crossref(new window)

Na, S., Ridgeway, S., and Cao, L. (2003). Theoretical and experimental study of fluid behavior of a peristaltic micropump. 15th Biennial University/Government/Industry Microelectronics Symposium, Boise, ID. pp. 312-316.

Nguyen, N. T., Huang, X., and Chuan, T. K. (2002). MEMS-micropumps: a review. Journal of Fluids Engineering, Transactions of the ASME, 124, 384-392. crossref(new window)

Nguyen, T. T. and Goo, N. S. (2006). A novel PDMS valveless micropump with a circular lightweight piezo-composite actuator. Key Engineering Materials, 326-328, 245-248. crossref(new window)

Nguyen, T. T., Pham, M., and Goo, N. S. (2008). Development of a peristaltic micropump for bio-medical applications based on mini LIPCA. Journal of Bionic Engineering, 5, 135-141. crossref(new window)

Ok, C. J. and Satoshi, K. (2008). Fabrication of a peristaltic micro pump with novel cascaded actuators. Journal of Micromechanics and Microengineering, 18, 025022. crossref(new window)

Richter, M., Conga, Y., Nissen, J., Neumayer, G., Heinrich, K., and Wackerle, M. (2005). A multi-material micropump for applications in microfluidics. Proceedings of First International Conference on Multi-Material Micro Manufacture (4M 2005), Karlsruhe, Germany. pp. 397-400.

Satyanarayana, S., Karnik, R. N., and Majumdar, A. (2005). Stamp-and-stick room-temperature bonding technique for microdevices. Journal of Microelectromechanical Systems, 14, 392-399. crossref(new window)

Smith, B. F., Goo, N. S., and Mossi, K. (2007). Experimental development of power consumption in LIPCA-C2. Proceedings of SPIE, 6526, 65261M.

Smits, J. G. (1990). Piezoelectric micropump with three valves working peristaltically. Sensors and Actuators A: Physical, 21, 203-206. crossref(new window)

Teymoori, M. M. and Abbaspour-Sani, E. (2004). Design and simulation of a novel electrostatic peristaltic micromachined pump for drug delivery applications. Sensors and Actuators A: Physical, 117, 222-229.

Woias, P. (2005). Micropumps-Past, progress and future prospects. Sensors and Actuators B: Chemical, 105, 28-38. crossref(new window)

Yoon, K. J., Shin, S. J., Park, H. C., and Goo, N. S. (2002). Design and manufacture of a lightweight piezo-composite curved actuator. Smart Materials and Structures, 11, 163-168. crossref(new window)

Zhang, Y., Gu, P., and Fan, X. (2007). Progress on research of MEMS-based micropump. Proceedings of the 7th International Conference on Electronics Packaging Technology, Shanghai, China.