Advanced 1D Structural Models for Flutter Analysis of Lifting Surfaces

- Journal title : International Journal of Aeronautical and Space Sciences
- Volume 13, Issue 2, 2012, pp.199-209
- Publisher : The Korean Society for Aeronautical & Space Sciences
- DOI : 10.5139/IJASS.2012.13.2.199

Title & Authors

Advanced 1D Structural Models for Flutter Analysis of Lifting Surfaces

Petrolo, Marco;

Petrolo, Marco;

Abstract

An advanced aeroelastic formulation for flutter analyses is presented in this paper. Refined 1D structural models were coupled with the doublet lattice method, and the g-method was used for flutter analyses. Structural models were developed in the framework of the Carrera Unified Formulation (CUF). Higher-order 1D structural models were obtained by using Taylor-like expansions of the cross-section displacement field of the structure. The order (N) of the expansion was considered as a free parameter since it can be arbitrarily chosen as an input of the analysis. Convergence studies on the order of the structural model can be straightforwardly conducted in order to establish the proper 1D structural model for a given problem. Flutter analyses were conducted on several wing configurations and the results were compared to those from literature. Results show the enhanced capabilities of CUF 1D in dealing with the flutter analysis of typical wing structures with high accuracy and low computational costs.

Keywords

Unified Formulation;Beam;Doublet Lattice Method;G-Method;

Language

English

Cited by

1.

2.

3.

References

1.

Yurkovich, R., "Status of unsteady aerodynamic prediction for flutter of high-performance aircraft", Journal of Aircraft, Vol. 40, No. 5, 2003, pp. 832--842.

2.

Schuster, D.M., Liu, D.D., and Huttsell L.J., "Computational aeroelasticity: success, progress, challenge", Journal of Aircraft, Vol. 40, No. 5, 2003, pp. 843--856.

3.

Theodorsen, T., and Garrick, I.E., "A theoretical and experimental investigation of the flutter problem", NACA, City, State or Country, 1940,

4.

Yates, E.C., "Modified-strip-analysis method for predicting wing flutter at subsonic to hypersonic speeds", Journal of Aircraft, Vol. 3, No. 1, 1966, pp. 25--29.

5.

Albano, E., and Rodden, W.P., "A doublet-lattice method for calculating lift distributions on oscillating surfaces in subsonic flows", AIAA Journal, Vol. 7, No. 2, 1969, pp. 279-- 285.

6.

Rodden, W.P., Taylor, P.F., and McIntosh, S.C.J., "Further Refinement of the Subsonic Doublet-Lattice Method", Journal of Aircraft, Vol. 33, No. 5, 1998, pp. 720--726.

7.

Bernoulli, D., "De vibrationibus et sono laminarum elasticarum. In: Commentarii Academiae Scientiarum Imperialis Petropolitanae", Petropoli, 1751.

8.

Euler, L., De curvis elasticis Lausanne and Geneva, Bousquet, 1744.

9.

Timoshenko, S.P., "On the corrections for shear of the differential equation for transverse vibrations of prismatic bars", Philosophical Magazine, Vol. 41, 1921, pp. 744--746.

10.

Novozhilov, V.V., Theory of elasticity, Pergamon Press, Oxford, 1961.

11.

Timoshenko, S.P., and Goodier, J.N., Theory of elasticity, McGraw-Hill, New York, 1970.

12.

Sokolnikoff, I.S., Mathematical Theory of Elasticity, McGrw-Hill, 1956.

13.

Cowper, G.R., "The Shear Coefficient in Timoshenko's Beam Theory", Journal of Applied Mechanics, Vol. 33, No. 2, 1966, pp. 335--340.

14.

Krishna Murty A.V., "On the Shear Deformation Theory for Dynamic Analysis of Beams", Journal of Sound and Vibration, Vol. 101, No. 1, 1985, pp. 1--12.

15.

Pai, P.F., and Schulz, M.J., "Shear correction factors and an-energy consistent beam theory", International Journal of Solids and Structures, Vol. 36, 1999, pp. 1523--1540.

16.

Mechab, I., Tounsi, A., Benatta, M.A., and Adda Bedia, E.A., "Deformation of short composite beam using refined theories", Journal of Mathematical Analysis and Applications,Vol. 36, No. 6, 2008, pp. 468--479.

17.

Gruttmann, F., Sauer, R., and Wagner, W., "Shear Stresses in Prismatic Beams with Arbitrary Cross-Sections", International Journal for Numerical Methods in Engineering, Vol. 45, 1999, pp. 865--889.

18.

El, Fatmi R., and Ghazouani, N., "Higher order composite beam theory built on Saint-Venant solution. Part-I: Theoretical developments", Composite Structures, Vol. 93, No. 2, 2011, pp. 557-566, Doi:10.1016/j.compstruct.2010.08.024.

19.

Krayterman, B.L., and Krayterman, A.B., "Generalized nonuniform torsion of beams and frames", Journal of Structural Engineering, Vol. 113, 1987, pp. 1772--1787.

20.

Ladeveze, P., Sanchez, P., and Simmonds, J., "Beamlike (Saint-Venant) solutions for fully anisotropic elastic tubes of arbitrary closed cross section", International Journal of Solids & Structures, Vol. 41, No. 7, 2004,pp. 1925--1944.

21.

Iesan, D., "On Saint-Venant's problem", Archive for Rational Mechanics and Analysis, Vol. 91, 1986, pp. 363--373.

22.

Lin, H.C., and Dong, S.B., "On the Almansi-Michell problems for an inhomogeneous, anisotropic cylinder", Journal of Mechanics, Vol. 22, No. 1, 2006, pp. 51--57.

23.

Berdichevsky, V.L., Armanios, E., and Badir, A., "Theory of anisotropic thin-walled closed-cross-section beams", Composites Engineering, Vol. 2, No. 5-7, 1992, pp. 411--432.

24.

Volovoi, V.V., Hodges, D.H., Berdichevsky, V.L., and Sutyrin, V.G. "Asymptotic theory for static behavior of elastic anisotropic I-beams", International Journal of Solid Structures, Vol. 36, No. 7, 1999,pp. 1017--1043.

25.

Volovoi, V.V., and Hodges, D.H., "Theory of anisotropic thin-walled beams", Journal of Applied Mechanics, Vol. 67, No. 3, 2000, pp. 453--459.

26.

Yu, W., Volovoi, V.V., Hodges, D.H., and Hong, X., "Validation of the variational asymptotic beam sectional analysis (VABS)", AIAA Journal, Vol. 40, No. 10, 2002, pp. 2105--2113.

27.

Schardt, R., "Eine Erweiterung der Technischen Biegetheorie zur Berechnung prismatischer Faltwerke", Der Stahlbau, Vol. 35, 1966, pp. 161--171.

28.

Silvestre, N., "Generalised beam theory to analyse the buckling behaviour of circular cylindrical shells and tubes", Thin-Walled Structures, Vol. 45, No. 2, 2007, pp. 185--198.

29.

Nedelcu, M., "GBT formulation to analyse the behaviour of thin-walled members with variable crosssection", Thin-Walled Structures, Vol. 48, No. 8, 2010, pp. 629--638.

30.

Washizu, K., Variational methods in elasticity and plasticity, Pergamon Press, Oxford, 1968.

31.

Kanok-Nukulchai, W., and Shik Shin, Y., "Versatile and improved higher-order beam elements", Journal of Structural Engineering, Vol. 110, 1984, pp. 2234--2249.

32.

Kapania, K., and Raciti, S., "Recent Advances in Analysis of Laminated Beams and Plates, Part I: Shear Effects and Buckling", AIAA Journal, Vol. 27, No. 7, 1989, pp. 923--935.

33.

Kapania, K., and Raciti, S., "Recent Advances in Analysis of Laminated Beams and Plates, Part II: Vibrations and Wave propagation", AIAA Journal, Vol. 27, No. 7, 1989, pp. 935--946.

34.

Librescu, L., and Song, O., "On the static aeroelastic tailoring of composite aircraft swept wings modelled as thinwalled beam structures", Composites Engineering, Vol. 2, 1992, pp. 497--512.

35.

Qin, Z., and Librescu, L., "On a shear-deformable theory of anisotropic thin-walled beams: further contribution and validations", Composite Structures, Vol. 56, 2002, pp. 345--358.

36.

Banerjee, J.R., Su, H., and Jayatunga, C., "A dynamic stiffness element for free vibration analysis of composite beams and its application to aircraft wings", Computers and Structures, Vol. 86, 2008, pp. 573--579.

37.

Carrera, E., Giunta, G., and Petrolo, M., Beam Structures: Classical and Advanced Theories, John Wiley & Sons, Chicester, UK, 2011.

38.

Carrera, E., "Theories and finite elements for multilayered, anisotropic, composite plates and shells" Archives of Computational Methods in Engineering, Vol. 9, No. 2, 2002, pp. 87--140.

39.

Carrera E., "Theories and finite elements for multilayered plates and shells: a unified compact formulation with numerical assessment and benchmarking", Archives of Computational Methods in Engineering, Vol. 10, No. 3, 2003, pp. 216--296.

40.

Carrera, E., and Giunta, G., "Refined beam theories based on a unified formulation", International Journal of Applied Mechanics, Vol. 2, No., 1, 2010, 2(1): pp. 117--143

41.

Carrera, E., Giunta, G., Nali, P., and Petrolo, M., "Refined beam elements with arbitrary cross-section geometries", Computers and Structures, Vol. 88, No. 5-6, 2010, pp. 283-293, DOI: 10.1016/j.compstruc.2009.11.002.

42.

Carrera, E., Giunta, G., and Petrolo, M., "A Modern and Compact Way to Formulate Classical and Advanced Beam Theories", Developments and Applications in Computational Structures Technology, edited by Adam, J.M., Pallares, F.J., Bru, R., and Romero, M.L., Saxe-Coburg Publications, Stirlingshire, UK, 2010, pp 75-112. doi:10.4203/csets.25.4

43.

Carrera, E., Petrolo, M., and Zappino, E., "Performance of CUF approach to analyze the structural behavior of slender bodies", Journal of Structural Engineering, Vol. 138, No. 2, 2012, pp. 285-297,Doi:10.1061/(ASCE)ST.1943-541X.0000402.

44.

Carrera, E., Petrolo, M., and Nali, P., "Unified formulation applied to free vibrations finite element analysis of beams with arbitrary section", Shock and Vibrations, Vol. 17, 2010, pp. 1-18, DOI: 10.3233/SAV-2010-0528.

45.

Carrera, E., Petrolo, M., and Varello, A., "Advanced Beam Formulations for Free Vibration Analysis of Conventional and Joined Wings", Journal of Aerospace Engineering, Vol. 25, No. 2, 2012, pp. 282-293,Doi:10.1061/(ASCE)AS.1943-5525.0000130.

46.

Petrolo, M., Zappino, E., and Carrera, E., "Unified higher-order formulation for the free vibration analysis of one-dimensional structures with compact and bridge-like cross-sections", Thin Walled Structures, Vol. 56, 2012, pp. 49- 61,Http://dx.doi.org/10.1016/j.tws.2012.03.011.

47.

Ibrahim, S.M., Carrera, E., Petrolo, M., and Zappino, E., "Buckling of composite thin walled beams by refined theory", Composite Structures, Vol. 94, No. 2, 2012, pp. 563-570.

48.

Ibrahim, S.M., Carrera, E., Petrolo, M., and Zappino, E., "Buckling of thin walled beams by refined theory", Journal of Zhejiang University Science A, 2012, In press, DOI: 10.1631/jzus.A1100331.

49.

Carrera, E., and Petrolo, M., "Refined Beam Elements with only Displacement Variables and Plate/ Shell Capabilities", Meccanica, Vol. 47, No. 3, 2012, pp. 537-556,DOI: 10.1007/s11012-011-9466-5.

50.

Carrera, E., and Petrolo, M., "Refined One-Dimensional Formulations for Laminated Structure Analysis", AIAA Journal, Vol. 50, No. 1, 2012, pp. 176-189, Doi: 10.2514/1.J051219.

51.

Carrera, E., Maiarù, M., and Petrolo, M., "Component-Wise Analysis of Laminated Anisotropic Composites", International Journal of Solids and Structures, Vol. 49, No. 13, 2012, pp. 1839-1851,Http://dx.doi.org/10.1016/j.ijsolstr.2012.03.025.

52.

Varello, A., Carrera, E., and Demasi, L., "Vortex Lattice Method Coupled with Advanced One-Dimensional Structural Models", ASDJournal, Vol. 2, No. 2, 2011, pp.53--78.

53.

Landahl, M.T., "Kernel Function for Nonplanar Oscillating Surfaces in a Subsonic Flow", AIAA Journal, Vol. 5, No. 5, 1967, pp. 1045--1046.

54.

Katz, J., and Plotkin, A., Low-Speed Aerodynamics: From Wing Theory to Panel Methods, McGraw-Hill, Inc., New York, 1991.

55.

Harder, R.L., and Desmarais, R.N., "Interpolation Using Surface Splines", Journal of Aircraft, Vol. 9, No. 2, 1972, pp. 189--192.

56.

Demasi, L., and Livne, E., "Dynamic Aeroelasticity of Structurally Nonlinear Configurations Using Linear Modally Reduced Aerodynamic Generalized Forces", AIAA Journal, Vol. 47, No. 1, 2009, pp. 71-90

57.

Chen, P.C., "Damping Perturbation Method for Flutter Solution: The g-Method", AIAA Journal, Vol. 38, No. 9, 2000, pp. 1519--1524.

58.

Forsching, H., Triebstein, H., and Wagener, J., "Pressure Measurements on an Harmonically Oscillating Swept Wing with Two Control Surfaces in Incompressible Flow", AGARD Conference Proceedings, Tonsberg, Norway, November 1970.

59.

Ueda, T., and Dowell, E.H., "A new solution method for lifting surfaces in subsonic flow", AIAA Journal, Vol. 20, No. 3, 1982, pp. 348--355.

60.

Rowe, W.S., and Petrarca, J.R., "Reduction of computer usage costs in predicting unsteady aerodynamic loadings caused by control surface motions", NASA, 1980, 145354-1.

61.

Koo, K.N., "Aeroelastic Characteristics of Double-Swept Isotropic and Composite Wings", Journal of Aircraft, Vol. 38, No. 2, 2001, pp. 343--348.