JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Vibration control laws via shunted piezoelectric transducers: A review
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Vibration control laws via shunted piezoelectric transducers: A review
Qureshi, Ehtesham Mustafa; Shen, Xing; Chen, JinJin;
  PDF(new window)
 Abstract
Attaching a piezoelectric transducer to a vibrating structure, and shunting it with an electric circuit, gives rise to different passive, semi-passive, and semi-active control techniques. This paper attempts to review the research related to structural vibration control, via passive, semi-passive, and semi-active control methods. First, the existing electromechanical modeling is reviewed, along with the modeling methods. These range from lumped parameters, to distributed parameters modeling of piezostructural systems shunted by electrical networks. Vibration control laws are then discussed, covering passive, semi-passive, and semi-active control techniques, which are classified according to whether external power is supplied to the piezoelectric transducers, or not. Emphasis is placed on recent articles covering semi-passive and semi-active control techniques, based upon switched shunt circuits. This review provides the necessary background material for researchers interested in the growing field of vibration damping and control, via shunted piezostructural systems.
 Keywords
Damping;Piezoelectric;Shunt;Switch;
 Language
English
 Cited by
1.
Power output and efficiency of a negative capacitance and inductance shunt for structural vibration control under broadband excitation,;;;

International Journal of Aeronautical and Space Sciences, 2015. vol.16. 2, pp.223-246 crossref(new window)
1.
Power output and efficiency of a negative capacitance and inductance shunt for structural vibration control under broadband excitation, International Journal of Aeronautical and Space Sciences, 2015, 16, 2, 223  crossref(new windwow)
2.
Piezoelectric shunt damping by synchronized switching on negative capacitance and adaptive voltage sources, International Journal of Aeronautical and Space Sciences, 2014, 15, 4, 396  crossref(new windwow)
 References
1.
Hopkins, M.A., Henderson, D.A., Moses, R.W., Ryall, T., Zimcik, D.G., and Spangler, R.L., "Active vibrationsuppression systems applied to twin-tail buffering", Proc. SPIE Smart Structures and Materials: Industrial and Commercial Application of Smart Structures Technologies, Vol. 3326, issue, 1998, pp. 27-33. DOI:10.1117/12.310663. crossref(new window)

2.
Simpson, J., and Schweiger, J., "Industrial approach to piezoelectric damping of large fighter aircraft components", Proc. SPIE Smart Structures and Materials: Industrial and Commercial Application of Smart Structures Technologies, Vol. 3326, issue, 1998, pp. 34-46. DOI:10.1117/12.310669. crossref(new window)

3.
Kim, S., Han, C., and Yun, C., "Improvement of aeroelastic stability of hingeless helicopter rotor blade by passive piezoelectric damping", Proc. SPIE Smart Structures and Materials: Passive Damping and Isolation, Vol. 3672, issue, 1999, pp. 131-141. DOI:10.1117/12.349776. crossref(new window)

4.
Wu, S., Turner, T.L., and Rizzi, S.A., "Piezoelectric shunt vibration damping of an F-15 panel under high-acoustic excitation", Proc. SPIE Smart Structures and Materials: Damping and Isolation, Vol. 3989, issue, 2000, pp. 276-287. DOI:10.1117/12.384568. crossref(new window)

5.
Sheta, E.F., and Moses, R.W., "Active smart material control system for buffet alleviation", Journal of Sound and Vibration, Vol. 292, Issue 3-5, 2006, pp. 854-868. DOI: 10.1016/j.jsv.2005.09.002. crossref(new window)

6.
Forward, R.L., "Electronic damping of vibrations in optical structures", Applied Optics, Vol.18, Issue 5, 1979, pp. 690-697. DOI: 10.1364/AO.18.000690. crossref(new window)

7.
Hagood, N.W., Chung, W.H., and von Flotow, A., "Modelling of piezoelectric actuator dynamics for active structural control", Journal of Intelligent Material Systems and Structures, Vol. 1, Issue 3, 1990, pp. 327-354. DOI: 10.1177/1045389X9000100305. crossref(new window)

8.
Hagood, N.W., and Crawley, E.F., "Experimental investigations of passive enhancement of damping space structures", Journal of Guidance, Control and Dynamics, Vol. 14, Issue 6, 1991, pp. 1100-1109. DOI: 10.2514/3.20763. crossref(new window)

9.
Hagood, N.W., and von Flotow, A., "Damping of structural vibrations with piezoelectric materials and passive electrical networks", Journal of Sound and Vibration, Vol. 146, Issue 2, 1991, pp. 243-268. DOI: 10.1016/0022-460X(91)90762-9. crossref(new window)

10.
Hollkamp, J.J., "Multimodal passive vibration suppression with piezoelectric materials and resonant shunts", Journal of Intelligent Material Systems and Structures, Vol. 5, Issue 1, 1994, pp. 49-56. DOI: 10.1177/1045389X9400500106. crossref(new window)

11.
Law, H.H., Rossiter, P.L., Simon, G.P., and Koss, L.L., "Characterization of mechanical vibration damping by piezoelectric materials", Journal of Sound and Vibration, Vol. 197, Issue 4, 1996, pp. 489-513. DOI:10.1006/jsvi.1996.0544. crossref(new window)

12.
Behrens, S., Moheimani, S.O.R., and Fleming, A.J., "Multiple mode current flowing passive piezoelectric shunt controller", Journal of Sound and Vibration, Vol. 266, Issue 5, 2003, pp. 929-942. DOI: 10.1016/S0022-460X(02)01380-9. crossref(new window)

13.
Dong, X.J., Meng, G., and Peng, J.C., "Vibration control of piezoelectric smart structures based on system identification technique: Numerical simulation and experimental study", Journal of Sound and Vibration, Vol. 297, Issue 3-5, 2006, pp. 680-693. DOI: 10.1016/j.jsv.2006.04.021. crossref(new window)

14.
Silva, S.D., Junior, V.L., and Brennan, M.J., "Design of a control system using linear matrix inequalities for the active vibration control of a plate", Journal of Intelligent Material Systems and Structures, Vol. 17, Issue 1, 2006, pp. 81-93. DOI:10.1177/1045389X06056341. crossref(new window)

15.
Qiu, Z.C., Han, J.D., Zhang, X.M., Wang, Y.C., and Wu, Z.W., "Active vibration control of a flexible beam using a non-collocated acceleration sensor and piezoelectric patch actuator", Journal of Sound and Vibration, Vol. 326, Issue 3-5, 2009, pp. 438-455. DOI: 10.1016/j.jsv.2009.05.034. crossref(new window)

16.
Sunar, M., and Rao, S.S., "Recent advances in sensing and control of flexible structures via piezoelectric materials technology", Applied Mechanics Reviews, Vol. 52, Issue 1, 1999, pp. 1-16. DOI:10.1115/1.3098923. crossref(new window)

17.
Tang, J., Liu, Y., and Wang, K.W., "Semiactive and active-passive hybrid structural damping treatments via piezoelectric materials", Shock and Vibration Digest, Vol. 32, Issue 3, 2000, pp. 189- 200. DOI:10.1177/058310240003200302. crossref(new window)

18.
Benjeddou, A., "Advances in piezoelectric finite element modeling of adaptive structural elements: a survey", Computers & Structures, Vol. 76, Issue 1-3, 2000, pp. 347-363. DOI: 10.1016/S0045-7949(99)00151-0. crossref(new window)

19.
Benjeddou, A., "Advances in hybrid active-passive vibration and noise control via piezoelectric and viscoelastic constrained layer treatments", Journal of Vibration and Control, Vol. 7, Issue 4, 2001, pp. 565-602. DOI: 10.1177/107754630100700406. crossref(new window)

20.
Trindade, M.A., and Benjeddou, A., "Hybrid active-passive damping treatments using viscoelastic and piezoelectric materials: Review and Assessment", Journal of Vibration and Control, Vol. 8, Issue 6, 2002, pp. 699-745. DOI: 10.1177/1077546029186. crossref(new window)

21.
Moheimani, S.O.R., "A survey of recent innovations in vibration damping and control using shunted piezoelectric transducers", IEEE Transactions on Control Systems Technology, Vol. 11, Issue 4, 2003, pp. 482-494. DOI:10.1109/TCST.2003.813371. crossref(new window)

22.
Sodano, H.A., Inman, D.J., and Park, G., "A review of power harvesting from vibration using piezoelectric materials", The Shock and Vibration Digest, Vol. 36, Issue 3, 2004, pp. 197-205. DOI: 10.1177/0583102404043275. crossref(new window)

23.
Anton, S.R., and Sodano, H.A., "A review of power harvesting using piezoelectric materials (2003-2006)", Smart Materials and Structures, Vol. 16, Issue 3, 2007, pp. R1-R21. DOI:10.1088/0964-1726/16/3/R01. crossref(new window)

24.
Wang, Y., and Inman, D.J., "A survey of control strategies for simultaneous vibration suppression and energy harvesting via piezoceramics", Journal of Intelligent Material Systems and Structures, Vol. 23, Issue 18, 2012, pp. 2021-2037. DOI:10.1177/1045389X12444485. crossref(new window)

25.
Song, G., Sethi, V., and Li, H-N., "Vibration control of civil structures using piezoceramic smart materials: A review", Journal of Engineering Structures, Vol. 28, Issue 11, 2006, pp. 1513-1524. DOI:10.1016/j.engstruct.2006.02.002. crossref(new window)

26.
Fisco, N.R., and Adeli, H., "Smart structures: Part I- Active and semi-active control", Scientia Iranica Transactions A: Civil Engineering, Vol. 18, Issue 3, 2011, pp. 275-284. DOI:10.1016/j.scient.2011.05.034. crossref(new window)

27.
Fisco, N.R., and Adeli, H., "Smart structures: Part II- Hybrid control systems and control strategies", Scientia Iranica Transactions A: Civil Engineering, Vol. 18, Issue 3, 2011: pp. 285-295. DOI: 10.1016/j.scient.2011.05.035. crossref(new window)

28.
Corr, L.R., and Clark, W.W., "Comparison of lowfrequency piezoelectric switching shunt techniques for structural damping", Smart Structures and Materials, Vol. 11, Issue 3, 2002, pp. 370-376. DOI:10.1088/0964-1726/11/3/307. crossref(new window)

29.
Davis, C.L., and Lesieutre, G.A., "An actively tuned solid-state vibration absorber using capacitive shunting of piezoelectric stiffness", Journal of Sound and Vibration, Vol. 232, Issue 3, 2000, pp. 601-617. DOI:10.1006/jsvi.1999.2755. crossref(new window)

30.
Larson G.D., Rogers, P.H., and Munk, W., "State switched transducers: A new approach to high-power, lowfrequency, underwater projectors", Journal of Acoustical Society of America, Vol. 103, Issue 3, 1998, pp. 1428-1441. DOI:10.1121/1.421283. crossref(new window)

31.
Badel, A., Lagache, M., and Guyomar, D., et al., "Finite element and simple lumped modeling for flexural nonlinear semi-passive damping", Journal of Intelligent Material Systems and Structures, Vol. 18, Issue 7, 2007: pp. 727-742. DOI: 10.1177/1045389X06069447. crossref(new window)

32.
Cunefare, K.A., "State-switched absorber for vibration control of point-excited beams", Journal of Intelligent Material Systems and Structures, Vol. 13, Issue 2-3, 2002, pp. 97-105. DOI: 10.1177/104538902761402495. crossref(new window)

33.
Niederberger, D., Fleming, A., Moheimani, S.O.R., and Morari, M., "Adaptive multi-mode resonant piezoelectric shunt damping", Smart Materials and Structures, Vol. 13, Issue 5, 2004, pp. 1025-1035. DOI:10.1088/0964-1726/13/5/007. crossref(new window)

34.
Lallart, M., Harari, S., and Petit, L., et al., "Blind switch damping (BSD): A self-adaptive semi-active damping technique", Journal of Sound and Vibration, Vol. 328, No. 1-2, 2009, pp. 29-41. DOI:10.1016/j.jsv.2009.07.030. crossref(new window)

35.
Guyomar, D., Richard, C., and Mohammadi, S., "Damping behavior of semi-passive vibration control using shunted piezoelectric materials", Journal of Intelligent Material Systems and Structures, Vol. 19, Issue 8, 2008, pp. 977-985. DOI: 10.1177/1045389X07083122. crossref(new window)

36.
Ji, H., Qiu, J., Badel, A., and Zhu, K., "Semiactive vibration control of a composite beam using an adaptive SSDV approach", Journal of Intelligent Material Systems and Structures, Vol. 20, Issue 4, 2009, pp. 401-412. DOI:10.1177/1045389X08095182. crossref(new window)

37.
Ji, H., Qiu, J., Zhu, K., and Badel, A., "Two-mode vibration control of a beam using nonlinear synchronized switching damping based on the maximization of converted energy", Journal of Sound and Vibration, Vol. 329, Issue 14, 2010, pp. 2751-2767. DOI:10.1016/j.jsv.2010.01.012 crossref(new window)

38.
Erturk, A., and Inman, D.J., "Issues in mathematical modeling of piezoelectric energy harvesters", Smart Materials and Structures, Vol. 17, Issue 6, 2008, pp. 065016 (14pp). DOI:10.1088/0964-1726/17/6/065016. crossref(new window)

39.
Guyomar, D., Lallart, M., and Monnier, T., "Stiffness tuning using a low-cost semiactive nonlinear technique", IEEE/ ASME Transactions on Mechatronics, Vol. 13, Issue 5, 2008, pp. 604-607. DOI: 10.1109/TMECH.2008.2004411. crossref(new window)

40.
Guyomar, D., Richard, C., and Mohammadi, S., "Damping behavior of semi-passive vibration control using shunted piezoelectric materials", Journal of Intelligent Material Systems and Structures, Vol. 19, Issue 8, 2008, pp. 977-985. DOI: 10.1177/1045389X07083122. crossref(new window)

41.
Caruso, G., "A critical analysis of electric shunt circuits employed in piezoelectric passive vibration damping", Smart Materials and Structures, Vol. 10, Issue 5, 2001, pp. 1059- 1068. DOI:10.1088/0964-1726/10/5/322. crossref(new window)

42.
Hollkamp, J.J., and Starchville, J.T.F., "A self-tuning piezoelectric vibration absorber", Journal of Intelligent Material Systems and Structures, Vol. 5, Issue 4, 1994, pp. 559-566. DOI:10.1177/1045389X9400500412. crossref(new window)

43.
Konak, M.J., Powlesland, I.G., van der Velden, S.P., and Galea, S.P., "A self-powered discrete time piezoelectric vibration damper". Proc. SPIE Conf. Integrated Systems: SPIE, Vol. 3241, issue, 1997, pp. 270-279. DOI:10.1117/12.293506. crossref(new window)

44.
Richard, C., Guyomar, D., Audigier, D., and Ching, G., "Semi-passive damping using continuous switching of a piezoelectric device", In Proc. SPIE Conf. Passive Damping Isolation, Newport Beach, CA, Vol. 3672, issue, 1999, pp. 104-111. DOI:10.1117/12.349773. crossref(new window)

45.
Tang, J., and Wang, K.W., "Active-passive hybrid piezoelectric networks for vibration control: Comparisons and improvement", Smart Materials and Structures, Vol. 10, No. 4, 2001, pp. 794-806. DOI:10.1088/0964-1726/10/4/325. crossref(new window)

46.
Thorp, O., Ruzzene, M., and Baz, A., "Attenuation and localization of wave propagation in rods with periodic shunted piezoelectric patches". Smart Materials and Structures, Vol. 10, Issue 5, 2001, pp. 979-989. DOI:10.1088/0964-1726/10/5/314. crossref(new window)

47.
Wu, S.Y., and Bicos, A.S., "Structural vibration damping experiments using improved piezoelectric shunts", In Proc. SPIE Conf. Passive Damping Isolation: SPIE, Vol. 3045, issue, 1997, pp. 40-50. DOI:10.1117/12.274217. crossref(new window)

48.
Johnson, C.D., "Design of passive damping systems", Journal of Mechanical Design, Transactions of the ASME, Vol. 117, issue B, 1995, pp.171-176. DOI:10.1115/1.2836451. crossref(new window)

49.
Wu, S.Y., "Piezoelectric shunts with a parallel R-L circuit for structural damping and vibration control", In Proc. SPIE Symp. Smart Structures Materials Passive Damping Isolation, May 1, Volume 2720, issue, 1996, pp. 259-269. DOI:10.1117/12.239093. crossref(new window)

50.
dell'Isola, F., Maurini, C., and Porfiri, M., "Passive damping of beam vibrations through distributed electric networks and piezoelectric transducers: prototype design and experimental validation", Smart Materials and Structures, Vol. 13, Issue 2, 2004, pp. 299- 308. DOI:10.1088/0964-1726/13/2/008. crossref(new window)

51.
Ramaratnam, A., and Jalili, N., "A switched stiffness approach for structural vibration control: Theory and realtime implementation", Journal of Sound & Vibration, Vol. 291, No. 1-2, 2006, pp. 258-274. 10.1016/j.jsv.2005.06.012. crossref(new window)

52.
Clark, W.W., "Semi-active vibration control with piezoelectric materials as variable stiffness actuators", Smart Structures and Materials 1999: Passive Damping and Isolation, Vol. 3672, issue, 1999, pp. 123-130. DOI:10.1117/12.349775. crossref(new window)

53.
Clark, W.W., "Vibration control with state-switched piezoelectric materials", Journal of Intelligent Material Systems and Structures, Vol. 11, Issue 4, 2000, pp. 263-271. DOI: 10.1106/18CE-77K4-DYMG-RKBB. crossref(new window)

54.
Corr, L.R., and Clark, W.W., "Energy dissipation analysis of piezoceramic semi-active vibration control", Journal of Intelligent Material Systems and Structures, Vol. 12, Issue 11, 2001, pp. 729-736. DOI: 10.1177/104538901400438028. crossref(new window)

55.
Holdhusen, M.H., and Cunefare, K.A., "Damping effects on the state-switched absorber used for vibration suppression", Journal of Intelligent Material Systems and Structures, Vol.14, Issue 9, 2003, pp. 551-561. DOI: 10.1177/104538903036919. crossref(new window)

56.
Corr, L.R., and Clark, W.W., "A novel semi-active multi-modal vibration control law for a piezoceramic actuator", Journal of Vibration and Acoustics, Vol. 125, Issue 2, 2003, pp. 214-222. DOI:10.1115/1.1547682. crossref(new window)

57.
Richard, C., Guyomar, D., and Audigier, D., et al., "Enhanced semi-passive damping using continuous switching of a piezoelectric device on an inductor", In Proc. of SPIE Smart Structures and Materials 2000: Damping and Isolation, Vol. 3989, issue, 2000, pp. 288-299. DOI:10.1117/12.384569. crossref(new window)

58.
Ducarne, J., Thomas, O., and Deu, J-F., "Structural vibration reduction by switch shunting of piezoelectric elements: modeling and optimization", Journal of Intelligent Material Systems and Structures, Vol. 21, Issue 8, 2010, pp. 797-816. DOI: 10.1177/1045389X10367835. crossref(new window)

59.
Petit, L., Lefeuvre, E., Richard, C., and Guyomar, D., "A broadband semi passive piezoelectric technique for structural damping", Proceedings of SPIE International Symposium on Smart Structure Materials: Damping and Isolation, Vol. 5386, issue, 2004, pp. 414-425. DOI:10.1117/12.532716. crossref(new window)

60.
Guyomar, D. and Badel, A., "Nonlinear semi-passive multimodal vibration damping: An efficient probabilistic approach", Journal of Sound and Vibration, Vol. 294, Issue 1-2, 2006, pp.249-268. DOI: 10.1016/j.jsv.2005.11.010. crossref(new window)

61.
Lefeuvre, E., Badel, A., and Petit, L., et al., "Semipassive piezoelectric structural damping by synchronized switching on voltage sources", Journal of Intelligent Material Systems and Structures, Vol. 17, Issue 8-9, 2006, pp. 653-660. DOI: 10.1177/1045389X06055810. crossref(new window)

62.
Badel, A., Sebald, G., and Guyomar, D., et al., "Piezoelectric vibration control by synchronized switching on adaptive voltage sources: towards wideband semi-active damping", Journal of the Acoustical Society of America, Vol. 119, No. 5, 2006, pp. 2815- 2825. DOI: 10.1121/1.2184149. crossref(new window)

63.
Lallart, M., Badel, A., and Guyomar, D., "Nonlinear semi-active damping using constant or adaptive voltage sources: a stability analysis", Journal of Intelligent Material Systems and Structures, Vol. 19, Issue 10, 2008, pp. 1131-1142. DOI: 10.1177/1045389X07083612. crossref(new window)

64.
Guyomar, D., Richard, C., and Mohammadi, S., "Semi-passive random vibration control based on statistics", Journal of Sound and Vibration, Vol. 307, Issue 3-5, 2007, pp. 818-833. DOI:10.1016/j.jsv.2007.07.008. crossref(new window)

65.
Lallart, M., Lefeuvre, E., and Richard, C., et al., "Selfpowered circuit for broadband, multimodal piezoelectric vibration control", Sensors and Actuators A: Physical, Vol. 143, Issue 2, 2008, pp. 377-382. DOI: 10.1016/j.sna.2007.11.017. crossref(new window)

66.
Neubauer, M., and Wallaschek, J., "Analytical and experimental investigation of the frequency ratio and switching law for piezoelectric switching techniques", Smart Materials and Structures, Vol.17, Issue 3, 2008, pp. 035003 (9pp). DOI:10.1088/0964-1726/17/3/035003. crossref(new window)

67.
Harari, S., Richard, C., and Gaudiller, L., "New semiactive multi-modal vibration control using piezoceramic components", Journal of Intelligent Material Systems and Structures, Vol. 20, Issue 13 , 2009, pp. 1603-1613. DOI: 10.1177/1045389X09102561. crossref(new window)

68.
Ji, H., Qiu, J., and Badel, A., et al., "Semi-active vibration control of a composite beam by adaptive synchronized switching on voltage sources based on LMS algorithm", Journal of Intelligent Material Systems and Structures, Vol. 20, Issue 8, 2009, pp. 939-947. DOI: 10.1177/1045389X08099967. crossref(new window)

69.
Ji, H., Qiu, J., and Zhu, K., et al., "Multi-modal vibration control using a synchronized switch based on a displacement switching threshold", Smart Materials and Structures, Vol. 18, Issue 3, 2009, pp. 035016 (8 pp). DOI:10.1088/0964-1726/18/3/035016. crossref(new window)

70.
Ji, H., Qiu, J., and Zhu, K.J., "Vibration control of a composite beam using self-sensing semi-active approach", Chinese Journal of Mechanical Engineering. Vol. 23, Issue *, 2010, pp. 663-670. DOI: 10.3901/CJME.2010.0. crossref(new window)

71.
Ji, H., Qiu, J., and Xia, P., "Analysis of energy conversion in two-mode vibration control using synchronized switch damping approach", Journal of Sound and Vibration, Vol. 330, Issue 15, 2011, pp. 3539-3560. DOI: 10.1016/j.jsv.2011.03.004. crossref(new window)

72.
Ji, H., Qiu, J., Xia, P., and Inman, D., "Analysis of energy conversion in switched-voltage control with arbitrary switching frequency", Sensors and Actuators A: Physical, Vol. 174, issue, 2012, pp. 162-172. DOI:10.1016/j.sna.2011.11.004. crossref(new window)

73.
Ji, H., Qiu, J., Cheng, J., and Inman, D., "Application of a Negative Capacitance Circuit in Synchronized Switch Damping Techniques for Vibration Suppression", Journal of Vibration and Acoustics, Vol. 133, Issue 4, 2011, pp. 041015- 1-10. DOI:10.1115/1.4003146. crossref(new window)

74.
Cheng, J., Ji, H., Qiu, J., and Takagi, T., "Semi-active vibration suppression by a novel synchronized switch circuit with negative capacitance", International Journal of Applied Electromagnetics and Mechanics, Vol. 37, Issue 4, 2011, pp. 291-308. DOI:10.3233/JAE-2011-1402. crossref(new window)

75.
Ji, H., Qiu, J., Xia, P., and Nie, H., "Energy conversion and performance of switched-voltage control based on negative capacitance with arbitrary switching frequency". Smart Materials and Structures, Vol. 21, Issue 12, 2012, pp.125010 (11pp). DOI:10.1088/0964-1726/21/12/125010. crossref(new window)

76.
Mokrani, B., Rodrigues, G., Ioan, B., Bastaits, R., and Preumont, A., "Synchronized switch damping on inductor and negative capacitance", Journal of Intelligent Material Systems and Structures, Vol. 23, No. 18, 2012, pp. 2065-2075. DOI:10.1177/1045389X11433493. crossref(new window)

77.
Han, X., Neubauer, M., and Wallaschek, J., "Improved piezoelectric switch shunt damping technique using negative capacitance", Journal of Sound and Vibration, Vol. 332, Issue 1, 2013, pp. 7-16. DOI: 10.1016/j.jsv.2012.08.001. crossref(new window)

78.
Qiu, J.H., Ji, H.L., and Shen, H., "Energy harvesting and vibration control using piezoelectric elements and a non-linear approach", In: 18th IEEE international symposium on the applications of ferroelectrics (ISAF), Piscataway, NJ, August, 2009, pp. 23-27. DOI:10.1109/ISAF.2009.5307559. crossref(new window)

79.
Fleming, A.J., and Moheimani, S.O.R., "Adaptive piezoelectric shunt damping", Smart Materials and Structures, Vol. 12, Issue 1, 2003, pp. 36-48. DOI:10.1088/0964-1726/12/1/305. crossref(new window)

80.
Qiu, J., Ji, H., and Zhu, K., "Semi-active vibration control using piezoelectric actuators in smart structures", Frontiers of Mechanical Engineering in China, Vol. 4, Issue 3, 2009, pp. 242-251. DOI:10.1007/s11465-009-0068-z. crossref(new window)

81.
Anderson, B.D.O., and Sumeth, V., Network Analysis and Synthesis: A Modern Systems Theory Approach, Englewood Cliffs, NJ, Prentice Hall, 1973.

82.
Edberg, D.L., and Bicos, A.S., "Design and development of passive damping concepts in advanced composite large space structures". In: 36th international SAMPE symposium and exhibition, San Diego, CA, 15-18 April, 1991.

83.
Richard, C., Guyomar, D., and Audigier, D., "An original damping approach using a switched piezoelectric device". In: Proceedings of the 10th international conference on adaptive structures and technologies (ICAST 1999), Paris, France, 11-13 October, 1999, Lancaster, PA, pp 21-28.

84.
Lallart, M., Lefeuvre, E., Richard, C., and Guyomar, D., "Self-powered circuit for broadband, multimodal piezoelectric vibration control", Sensors and Actuators A: Physical, Vol. 143, Issue 2, 2007, pp. 377-382. DOI: 10.1016/j.sna.2007.11.017. crossref(new window)

85.
Richard, C., Guyomar, D., and Lefeuvre, E., "Selfpowered Electronic Breaker with Automatic Switching by Detecting Maxima or Minima of Potential Difference Between its Power Electrodes", Patent # PCT/FR2005/003000, publication number: WO/2007/063194, 2007.

86.
Niederberger, D., and Morari, M., "An autonomous shunt circuit for vibration damping", Smart Materials and Structure, Vol. 15, Issue 2, 2006, pp. 359-364. DOI:10.1088/0964-1726/15/2/016. crossref(new window)

87.
Delpero, T., Di Lillo, L., Bergamini, A.E., and Ermanni, P., "Energy harvesting module for the improvement of the damping performance of autonomous synchronized switching on inductance", Journal of Intelligent Material Systems and Structures, Vol. 24, Issue 7, 2012, 837-845. DOI:10.1177/1045389X12463463. crossref(new window)