Advanced SearchSearch Tips
Shape and Orifice Optimization of Airbag Systems for UAV Parachute Landing
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Shape and Orifice Optimization of Airbag Systems for UAV Parachute Landing
Alizadeh, Masoud; Sedaghat, Ahmad; Kargar, Ebrahim;
  PDF(new window)
An airbag is an important safety system and is well known as a safety system in cars during an accident. Airbag systems are also used as a shock absorber for UAVs to assist with rapid parachute landings. In this paper, the dynamics and gas dynamics of five airbag shapes, cylindrical, semi-cylindrical, cubic, and two truncated pyramids, were modelled and simulated under conditions of impact acceleration lower than to avoid damage to the UAV. First, the responses of the present modelling were compared and validated against airbag test results under the same conditions. Second, for each airbag shape under the same conditions, the responses in terms of pressure, acceleration, and emerging velocity were investigated. Third, the performance of a pressure relief valve is compared with a fixed-area orifice implemented in the air bag. For each airbag shape under the same conditions, the optimum area of the fixed orifice was determined. By examining the response of pressure and acceleration of the airbag, the optimum shape of the airbag and the venting system is suggested.
Airbag;Gas dynamics;Shock absorber;UAV;Venting system;
 Cited by
Browntng, A. C., A Theoretical Approach to Airbag Shock Absorber Design, her majesty's stationery office, London, 1964.

Rosato, N., Passive airbag vent control valve study, U.S. Army Soldier and Biological Chemical Command Soldier Systems Center Natick, Massachusetts 01760-5017, 1999.

Do, S., Weck, and O.L.d., An Airbag-Based Impact Attenuation System for the Orion Crew Exploration Vehicle, Thesis (S.M.),Massachusetts Institute of Technology, Dept. of Aero-nautics and Astronautics, 2011.,.

Esgar, J. B. and Morgan, W. C., Analytical Study of Soft Landings on Gas-Filled Bags, NASA Technical Report R-75, Lewis Research Center, Cleveland, Ohio. 1960.

Vorticity Ltd, Alternative descent and Landing Technologies, Prepared for European Space Research and Technology Centre, August 2006.

Nelb, G.W., "Global Trends in Airbag Fibers and Fabrics", International Fiber Journal, Dec 1998.

McGinnis, L., TRW and the airbag industry, Nov. 30, 1995.

Barnes, J. A. and Rawson, N., "Melt-Through Behaviour of Nylon 6.6 Airbag Fabrics", Proc. Airbag 2000, Fraunhofer Institut fur Chemische Technologie, Karlsruhe, 26-27. November, Pub. Fraunhofer press, 1996.

Marlin, B. and Tanov, R., An LS-DYNA User Defined Material Model for Loosely Woven Fabric with Non-Orthogonal Varying Weft and Warp Angle, Center for advanced product evaluation, division of IMMI, 2002.

Kellas, S. and Mitcheltree, R., "Energy Absorber Design, Fabrication and Testing for a Pas-sive Earth Entry Vehicle", 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dy-namics, and Materials Conference, Denver, Colorado, Apr. 22-25, 2002.

Ross, E. W., Control Systems for Platform Landings Cushioned by Air Bags, Natick Tech-nical Report TR-88/021, U.S. Army Natick Research, Development and Engineering Center, Natick, MA, July 1987.

Lee, C., Rosato, N. and Lai, F., "An Investigation of Improved Airbag Performance by Vent Control and Gasinjection", AIAA PAPER 91-0892, American Institute of Aeronautics and Astronautics, January 1991.