JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Piezoelectric shunt damping by synchronized switching on negative capacitance and adaptive voltage sources
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Piezoelectric shunt damping by synchronized switching on negative capacitance and adaptive voltage sources
Qureshi, Ehtesham Mustafa; Shen, Xing; Chen, JinJin;
  PDF(new window)
 Abstract
Synchronized switch damping (SSD) techniques have recently been developed for structural vibration control using piezoelectric materials. In these techniques, piezoelectric materials are bonded on the vibrating structure and shunted by a network of electrical elements. These piezoelectric materials are switched according to the amplitude of the excitation force to damp vibration. This paper presents a new SSD technique called 'synchronized switch damping on negative capacitance and adaptive voltage sources' (SSDNCAV). The technique combines the phenomenon of capacitance transient charging and electrical resonance to effectively dampen the structural vibration. Also, the problem of stability observed in the previous SSD techniques is effectively addressed by adapting the voltage on the piezoelectric patch according to the vibration amplitude of the structure. Analytical expressions of vibration attenuation at the resonance frequency are derived, and the effectiveness of this new technique is demonstrated, for the control of a resonant cantilever beam with bonded piezoelectric patches, by comparing with SSDI, SSDVenh, and SSDNC techniques. Theoretical predictions and experimental results show the remarkable vibration damping capability of SSDNCAV technique, which was better than the previous SSD techniques. The broadband vibration control capabilities of SSDNCAV technique are also demonstrated, which exceed those of previous SSD techniques.
 Keywords
damping;piezoelectric;shunt;switch;
 Language
English
 Cited by
 References
1.
Moheimani, S.O.R., "A survey of recent innovations in vibration damping and control using shunted piezoelectric transducers", IEEE Transactions on Control Systems Technology, Vol. 11, 2003, pp. 482-494. DOI:10.1109/TCST.2003.813371 crossref(new window)

2.
Davis, C.L. and Lesieutre, G.A., "A modal strain energy approach to the prediction of resistivity shunted piezoceramic damping", Journal of Sound and Vibration, Vol. 184, No. 1 ,1995, pp. 129-139. DOI: 10.1006/jsvi.1995.0308 crossref(new window)

3.
Forward, R.L., "Electronic damping of vibrations in optical structures", Applied Optics, Vol.18, No. 5, 1979, pp. 690-697. DOI: 10.1364/AO.18.000690 crossref(new window)

4.
Hagood, N.W. and von Flotow, A., "Damping of structural vibrations with piezoelectric materials and passive electrical networks", Journal of Sound and Vibration, Vol. 146, No. 2, 1991, pp. 243-268. DOI: 10.1016/0022-460X(91)90762-9 crossref(new window)

5.
Qiu, J., Ji, H. and Zhu, K., "Semi-active vibration control using piezoelectric actuators in smart structures", Frontiers of Mechanical Engineering in China, Vol. 4, No. 9, 2009, pp. 242-251. DOI: 10.1007/s11465-009-0068-z crossref(new window)

6.
Wang, Y. and Inman, D.J., "A survey of control strategies for simultaneous vibration suppression and energy harvesting via piezoceramics", Journal of Intelligent Material Systems and Structures, Vol. 23, No. 18, 2012, pp. 2021-2037. DOI: 10.1177/1045389X12444485 crossref(new window)

7.
Hagood, N.W. and Crawley, E.F., "Experimental investigations of passive enhancement of damping space structures", Journal of Guidance, Control and Dynamics, Vol. 14, No. 6, 1991, pp. 1100-1109. DOI: 10.2514/3.20763 crossref(new window)

8.
Hollkamp, J.J., "Multimodal passive vibration suppression with piezoelectric materials and resonant shunts", Journal of Intelligent Material Systems and Structures, Vol. 5, No. 1, 1994, pp. 49-56. DOI: 10.1177/1045389X9400500106 crossref(new window)

9.
Law, H.H., Rossiter, P.L., Simon, G.P. and Koss, L.L., "Characterization of mechanical vibration damping by piezoelectric materials", Journal of Sound and Vibration, Vol. 197, No. 4, 1996, pp. 489-513. DOI:10.1006/jsvi.1996.0544 crossref(new window)

10.
Behrens, S., Moheimani, S.O.R. and Fleming, A.J.,"Multiple mode current flowing passive piezoelectric shunt controller", Journal of Sound and Vibration, Vol. 266, Issue 5, 2003, pp. 929-942. DOI:10.1016/S0022-460X(02)01380-9 crossref(new window)

11.
Richard, C., Guyomar, D., Audigier, D. and Ching, G., "Semi-passive damping using continuous switching of a piezoelectric device", In Proc. SPIE Conf. Passive Damping Isolation, Newport Beach, CA, Vol. 3672, 1999, pp. 104-111. DOI:10.1117/12.349773 crossref(new window)

12.
Clark, W.W., "Vibration control with state-switched piezoelectric materials", Journal of Intelligent Material Systems and Structures, Vol. 11, Issue 4, 2000, pp. 263-271. DOI: 10.1106/18CE-77K4-DYMG-RKBB crossref(new window)

13.
Richard, C., Guyomar, D. and Audigier, D., et al., "Enhanced semi-passive damping using continuous switching of a piezoelectric device on an inductor", In Proc. of SPIE Smart Structures and Materials 2000: Damping and Isolation, Vol. 3989, 2000, pp. 288-299. DOI:10.1117/12.384569 crossref(new window)

14.
Guyomar, D., Richard, C. and L. Petit, L., "Non-linear system for vibration damping", 142nd Meeting of Acoustical Society of America, Fort Lauderdale, FL, 2001.

15.
Cunefare, K.A., "State-switched absorber for vibration control of point-excited beams", Journal of Intelligent Material Systems and Structures, Vol. 13, Issue 2-3, 2002, pp. 97-105. DOI:10.1177/104538902761402495 crossref(new window)

16.
Onoda, J., Makihara, K. and Minesugi, K., "Energyrecycling semi-active method for vibration suppression with piezoelectric transducers", AIAA Journal, Vol. 41 No. 4, 2003, 711-719. DOI: 10.2514/2.2002 crossref(new window)

17.
Corr, L.R. and Clark, W.W., "A novel semi-active multimodal vibration control law for a piezoceramic actuator", Journal of Vibration and Acoustics, Vol. 125, Issue 2, 2003, pp. 214-222. DOI:10.1115/1.1547682 crossref(new window)

18.
Petit, L., Lefeuvre, E., Richard, C. and Guyomar, D., "A broadband semi passive piezoelectric technique for structural damping", Proceedings of SPIE International Symposium on Smart Structure Materials: Damping and Isolation, Vol. 5386, 2004, pp. 414-425. DOI:10.1117/12.532716 crossref(new window)

19.
Lefeuvre, E., Badel, A. and Petit, L., et al., "Semipassive piezoelectric structural damping by synchronized switching on voltage sources", Journal of Intelligent Material Systems and Structures, Vol. 17, Issue 8-9, 2006, pp. 653-660. DOI: 10.1177/1045389X06055810 crossref(new window)

20.
Badel, A., Sebald, G. and Guyomar, D., et al., "Piezoelectric vibration control by synchronized switching on adaptive voltage sources: towards wideband semi-active damping", Journal of the Acoustical Society of America, Vol. 119, No. 5, 2006, pp. 2815-2825. DOI: 10.1121/1.2184149 crossref(new window)

21.
Neubauer, M. and Wallaschek, J., "Analytical and experimental investigation of the frequency ratio and switching law for piezoelectric switching techniques", Smart Materials and Structures, Vol.17, Issue 3, 2008, pp. 035003 (9pp). DOI:10.1088/09641726/17/3/035003 crossref(new window)

22.
Ji, H., Qiu, J. and Badel, A., et al., "Semi-active vibration control of a composite beam by adaptive synchronized switching on voltage sources based on LMS algorithm", Journal of Intelligent Material Systems and Structures, Vol. 20, Issue 8, 2009, pp. 939-947. DOI: 10.1177/1045389X08099967 crossref(new window)

23.
Ji, H., Qiu, J. and Zhu, K., et al., "Multi-modal vibration control using a synchronized switch based on a displacement switching threshold", Smart Materials and Structures, Vol. 18, Issue 3, 2009, pp. 035016 (8 pp). DOI:10.1088/0964-1726/18/3/035016 crossref(new window)

24.
Ji, H., Qiu, J., Zhu, K. and Badel, A., "Two-mode vibration control of a beam using nonlinear synchronized switching damping based on the maximization of converted energy", Journal of Sound and Vibration, Vol. 329, Issue 14, 2010, pp. 2751-2767. DOI:10.1016/j.jsv.2010.01.012 crossref(new window)

25.
Ji, H., Qiu, J. and Xia, P., "Analysis of energy conversion in two-mode vibration control using synchronized switch damping approach", Journal of Sound and Vibration, Vol. 330, Issue 15, 2011, pp. 3539-3560. DOI: 10.1016/j.jsv.2011.03.004 crossref(new window)

26.
Qureshi, E.M., Shen , X. and Chen J.J., "Vibration control laws via shunted piezoelectric transducers: A review", International Journal of Aeronautical and Space Sciences, Vol. 15, No. 1, 2014, pp. 1-19. DOI:10.5139/IJASS.2014.15.1.1 crossref(new window)

27.
Ji, H., Qiu, J., Cheng, J. and Inman, D., "Application of a negative capacitance circuit in synchronized switch damping techniques for vibration suppression", Journal of Vibration and Acoustics, Vol. 133, Issue 4, 2011, pp. 041015-1-10. DOI:10.1115/1.4003146 crossref(new window)

28.
Ji, H., Qiu, J., Badel, A. and Zhu, K., "Semi-active vibration control of a composite beam using an adaptive SSDV approach", Journal of Intelligent Material Systems and Structures, Vol. 20, Issue 4, 2009, pp. 401-412. DOI: 10.1177/1045389X08095182 crossref(new window)

29.
Mokrani, B., Rodrigues, G., Ioan, B., Bastaits, R. and Preumont, A., "Synchronized switch damping on inductor and negative capacitance", Journal of Intelligent Material Systems and Structures, Vol. 23, No. 18, 2012, pp. 2065-2075. DOI: 10.1177/1045389X11433493 crossref(new window)

30.
Han, X., Neubauer, M. and Wallaschek, J., "Improved piezoelectric switch shunt damping technique using negative capacitance", Journal of Sound and Vibration, Vol. 332, Issue 1, 2013, pp. 7-16. DOI: 10.1016/j.jsv.2012.08.001 crossref(new window)

31.
Horowitz, P. and Hill, W., The Art of Electronics, Cambridge University Press, New York, 1996.

32.
Riodan, R.H.S., "Simulated inductors using differential amplifiers", Electronic Letter, Vol. 3, No. 2, 1967, pp. 50-51. DOI: 10.1049/el: 19670039 crossref(new window)