JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Study of Injection Molding Process of Shift Lever Using Injection Molding Analysis
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Study of Injection Molding Process of Shift Lever Using Injection Molding Analysis
Park, Chul-Woo; Lee, Boo-Youn; Lee, Sang-Min;
  PDF(new window)
 Abstract
The production processes were reviewed through the injection analysis of the shift lever as a core component of an auto lever installed in the automatic transmission of cars. The injection analysis was carried out for the shift lever and rod among the components in a shift lever module. The shift lever and rod are designed for injection molding with the insertion of a tube, a pin cable plate, and a steel rod for securing the strength of the product. The charging time, failure of injection molding, weld line, air trap, and deformation were reviewed according to this insert. Analyses on various gate positions were carried out for reviewing the cultivation and deformation of fiber around major components, such as the generation section of manipulation feeling and assembly section, so that optimal gate conditions might be reviewed and reflected in the mold design. Finally, we plan to compare the analysis results with the production of trial products.
 Keywords
Injection Molding Process;Injection Molding Analysis;Lever Shift;Weld Line;Deformation Pattern;Air Trap;
 Language
Korean
 Cited by
1.
PMMA Lens의 변형에 미치는 설계변수와 금형온도의 영향,이선호;허장욱;

한국기계가공학회지, 2016. vol.15. 5, pp.109-116 crossref(new window)
 References
1.
Kim, H. P. and Kim, Y. J., "A Study on the Effects of Filling and Packing Phases on the Injection Molding," KSMTE Annual Autumn Conference 2015, Vol. 1, No. 1, pp. 112-118, 2002.

2.
Kim, O. R., Cha, B. S., Lee, S. Y., Kim, Y. G. and Woo, C. K., "A Study on the Runner and Gate Consequence of Manufacture Double Shot Molding using CAE," Trans. Mater. Process., Vol. 18, No. 2, pp. 160-166, 2009. crossref(new window)

3.
Choi, H. J, Park, C. W and Choi, S. D., "Analyses on Deformation Patterns Depending on the Injection Process for Rear Lamp Reflectors of automotive," J. Korean Soc. Manuf. Process Eng., Vol. 9 No. 4, pp. 32-37, 2010.

4.
Park, C. W., "A Study on the Injection Molding Process of the Case of Drum Type Washer Using Moldflow," J. Korean Soc. Mar. Eng., Vol. 33, No 1, pp. 90-96, 2009. crossref(new window)

5.
Lee, D. G., Park, M. W. and Ahn, D. G., , "Design of Cooling System of Over-molding Mold for Socket Component of Automobile Wiper," Trans. Korean Soc. Mech. Eng. A, Vol. 35 No. 12, pp. 1635-1640, 2011. crossref(new window)