Effects of heat-treatment temperature on carbon-based composites with added illite Jeong, Eui-Gyung; Kim, Jin-Hoon; Lee, Young-Seak;
To investigate new applications for illite as an additive for carbon-based composites, the composites were prepared with and without illite at different heat-treatment temperatures. The effects of the heat-treatment temperature on the chemical structure, microstructure, and thermal oxidation properties of the resulting composites were studied. As the heat-treatment temperature was increased, silicon carbide SiC formation via carbothermal reduction increased until all the added illite was consumed in the case of the samples heat-treated at . This is attributed to the intimate contact between the in the illite and the phenol carbon precursor or the carbon fibers of the preform. Among composites prepared at all temperatures, those with illite addition exhibited fewer pores, voids, and interfacial cracks, resulting in larger bulk densities and lower porosities. A delay of oxidation was not observed in the illite-containing composites prepared at , suggesting that the illite itself absorbed energy for exfoliation or other physical changes. Therefore, if the illite-containing C/C composites can reach a density generally comparable to that of other C/C composites, illite may find application as a filler for C/C composites. However, in this study, the illite-containing C/C composites exhibited low density, even when prepared at a high heat-treatment temperature of , although the thermal oxidation of the resulting composites was improved.
Chen B, Zhang LT, Cheng LF, Luan XG. Erosion resistance of needled carbon/carbon composites exposed to solid rocket motor plumes. Carbon, 47, 1474 (2009). doi: 10.1016/j.carbon.2009.01.040.
Rollin M, Jouannigot S, Lamon J, Pailler R. Characterization of fibre/matrix interfaces in carbon/carbon composites. Composites Sci Technol, 69, 1442 (2009). doi: 10.1016/j.compscitech.2008.09.023.
Xuetao S, Kezhi L, Hejun L, Hongying D, Weifeng C, Fengtao L. Microstructure and ablation properties of zirconium carbide doped carbon/carbon composites. Carbon, 48, 344 (2010). doi: 10.1016/j.carbon.2009.09.035.
Li C, Crosky A. The effect of carbon fabric treatment on delamination of 2D-C/C composites. Composites Sci Technol, 66, 2633 (2006). doi: 10.1016/j.compscitech.2006.03.025.
Wu X, Luo R, Ni Y, Xiang Q. Microstructure and mechanical properties of carbon foams and fibers reinforced carbon composites densified by CLVI and pitch impregnation. Compos, Part A: Appl Sci Manuf, 40, 225 (2009). doi: 10.1016/j.compositesa.2008.11.007.
Huang JF, Deng F, Xiong XB, Li HJ, Li KZ, Cao LY, Wu JP. High performance Si-SiC composite coating for C/C composites prepared by a two-step pack cementation process. Adv Eng Mater, 9, 322 (2007). doi: 10.1002/adem.200600235.
Wu X, Radovic LR. Inhibition of catalytic oxidation of carbon/carbon composites by phosphorus. Carbon, 44, 141 (2006). doi:10.1016/j.carbon.2005.06.038.
Park SJ, Cho MS. Effect of anti-oxidative filler on the interfacial mechanical properties of carbon-carbon composites measured at high temperature. Carbon, 38, 1053 (2000). doi: 10.1016/s0008-6223(99)00210-9.
Papakonstantinou CG, Balaguru P, Lyon RE. Comparative study of high temperature composites. Compos, Part B: Eng, 32, 637 (2001). doi: 10.1016/s1359-8368(01)00042-7.
Sinha Ray S, Okamoto M. Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci, 28, 1539 (2003). doi: 10.1016/j.progpolymsci.2003.08.002.
Cho HG, Kim EY, Jeong GY. Surface chemical properties of the Youngdong iiiite ore: the pH of zero proton charge and surface site density. J Miner Soc Korea, 14, 12 (2001).
Zhou GH, Wang SW, Huang XX, Guo JK. Improvement of oxidation resistance of unidirectional Cf/SiO2 composites by the addition of SiCp. Ceram Int, 34, 331 (2008). doi: 10.1016/j.ceramint.2006.10.008.
Jeong E, Kim J, Cho SH, Kim JI, Han IS, Lee YS. New application of layered silicates for carbon fiber reinforced carbon composites. J Ind Eng Chem, 17, 191 (2011). doi: 10.1016/j.jiec.2011.02.032.
Kempfer L. The many face of boron nitride. Mater Eng, 107, 41 (1990).
Jeong E, Kim JH, Lee YS. New application of clay filler for carbon/carbon composites and improvement of filler effect by clay size reduction. Carbon Lett, 11, 293 (2010).
Harris LA, Kennedy CR, Wei GCT, Jeffers FP. Microscopy of Sic powders synthesized by reacting colloidal silica and pitch. J Am Ceram Soc, 67, C121 (1984). doi: 10.1111/j.1151-2916.1984.tb19716.x.
Lee SH, Yun SM, Kim SJ, Park SJ, Lee YS. Characterization of nanoporous $\beta$-SiC fiber complex prepared by electrospinning and carbothermal reduction. Res Chem Intermediat, 36, 731 (2010). doi: 10.1007/s11164-010-0175-9.
Yajima S, Okamura K, Hayashi J, Omori M. Synthesis of continuous Sic fibers with high tensile strength. J Am Ceram Soc, 59, 324 (1976). doi: 10.1111/j.1151-2916.1976.tb10975.x.
Pujar VV, Cawley JD. Effect of stacking faults on the X-ray diffraction profiles of $\beta$-SiC powders. J Am Ceram Soc, 78, 774 (1995). doi: 10.1111/j.1151-2916.1995.tb08246.x.
Koumoto K, Takeda S, Pai CH, Sato T, Yanagida H. High-resolution electron microscopy observations of stacking faults in $\beta$-SiC. J Am Ceram Soc, 72, 1985 (1989). doi: 10.1111/j.1151-2916.1989.tb06014.x.
Terada K, Yonemochi E. Physicochemical properties and surface free energy of ground talc. Solid State Ionics, 172, 459 (2004). doi:10.1016/j.ssi.2004.03.032.
Yang X, Guo SJ, Chen BF, Meng F, Lian YD. Electrostatic performance of various lubricant powders in P/M electrostatic die wall lubrication. Powder Technol, 164, 75 (2006). doi: 10.1016/j.powtec.2006.02.006.
Im JS, Kim SJ, Kang PH, Lee YS. The improved electrical conductivity of carbon nanofibers by fluorinated MWCNTs. J Ind Eng Chem, 15, 699 (2009). doi: 10.1016/j.jiec.2009.09.048.