JOURNAL BROWSE
Search
Advanced SearchSearch Tips
The Influence of Carbon Fiber Heat Treatment Temperature on Carbon-Carbon Brakes Characteristics
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Carbon letters
  • Volume 14, Issue 1,  2013, pp.22-26
  • Publisher : Korean Carbon Society
  • DOI : 10.5714/CL.2012.14.1.022
 Title & Authors
The Influence of Carbon Fiber Heat Treatment Temperature on Carbon-Carbon Brakes Characteristics
Galiguzov, Andrey; Malakho, Artem; Kulakov, Valery; Kenigfest, Anatoly; Kramarenko, Evgeny; Avdeev, Viktor;
  PDF(new window)
 Abstract
The effects of heat treatment temperature (HTT) of polyacrylonitrile-based carbon fiber (CF) on the mechanical, thermal, and tribological properties of C/C composites were investigated. It was found that HTT (graphitization) of CF affects the thermal conductivity and mechanical and tribological characteristics of C/C composites. Thermal treatment of fibers at temperatures up to led to a decrease of the wear rate and the friction coefficient of C/C composite-based discs from 7.0 to 1.1 /stop and from 0.356 to 0.269, respectively. The friction surface morphology and friction mechanism strongly depended on the mechanical properties of the CFs. The relief of the friction surface of composites based on CFs with final graphitization was also modified, compared to that of composites based on initial fibers. This phenomenon could be explained by modification of the abrasive wear resistance of reinforcement fibers and consequently modification of the friction and wearing properties of composites. Correlation of the graphitization temperature with the increased flexural and compressive strength, apparent density, and thermal conductivity of the composites was also demonstrated.
 Keywords
aerospace materials;CF;heat treatment;graphitization;carbon-carbon composite;wear and friction;
 Language
English
 Cited by
1.
탄소섬유의 오존처리가 나일론6 기지 복합재료의 크랙저항에 미치는 영향,한웅;최웅기;안계혁;김홍건;강신재;김병주;

공업화학, 2013. vol.24. 4, pp.363-369
2.
Effect of MoO3 on mechanical interfacial behavior and anti-oxidation of carbon fibers-reinforced composites,;;;;

Journal of Industrial and Engineering Chemistry, 2015. vol.30. pp.29-32 crossref(new window)
1.
Effect of MoO3 on mechanical interfacial behavior and anti-oxidation of carbon fibers-reinforced composites, Journal of Industrial and Engineering Chemistry, 2015, 30, 29  crossref(new windwow)
 References
1.
Savage G. Carbon-carbon composites, Chapman & Hall, London, 323-343 (1993).

2.
Awasthi S, Wood JL. Carbon/carbon composite materials for aircraft brakes. Ceram Eng Sci Proc, 9, 553 (1988). http://dx.doi.org/10.1002/9780470310496.ch4. crossref(new window)

3.
Loud SN. Commercial and industrial applications of composites. In: Peters ST, ed. Handbook of composites. 2nd ed., Chapman & Hall, London, 941 (1998).

4.
Fitzer E, Manocha LM. Carbon Reinforcements and carbon/carbon composites. Springer, New York, 73 (1998).

5.
Li D, Wang H, Wang X. Effect of microstructure on the modulus of PAN-based CFs during high temperature treatment and hot stretching graphitization. J Mater Sci, 42, 4642 (2007), http://dx.doi.org/10.1007/s10853-006-0519-4. crossref(new window)

6.
Cho DW, Yoon SB, Cho CW, Park JK. Effect of additional heattreatment temperature on chemical, microstructural, mechanical, and electrical properties of commercial PAN-based CFs. Carbon Lett, 12, 223 (2011). http://dx.doi.org/10.5714/CL.2011.12.4.223. crossref(new window)

7.
Shin HK, Lee HB, Kim KS. Tribological properties of pitch-based 2-D carbon-carbon composites. Carbon, 39, 959 (2001), http://dx.doi.org/10.1016/S0008-6223(00)00158-5. crossref(new window)

8.
Dhakate SR, Bahl OP. Effect of CF surface functional groups on the mechanical properties of carbon-carbon composites with HTT. Carbon, 41, 1193 (2003), http://dx.doi.org/10.1016/S0008-6223(03)00051-4. crossref(new window)

9.
Fitzer E, Manocha LM. Carbon reinforcements and carbon-carbon composites. Springer-Verlag, Berlin, 127 (1998).

10.
Chung DDL. CF composites. Butterworth-Heinemann, Newton, 75 (1994).

11.
Lee KJ, Chern Lin JH, Ju CP. Microstructure study of PAN-pitch carbon-carbon composite lubricative film. Mater Chem Phys, 78, 760 (2003), http://dx.doi.org/10.1016/S0254-0584(02)00414-5. crossref(new window)

12.
Murdie N, Ju CP, Don J, Fortunato FA. Microstructure of worn pitch/resin /CVI C-C composites. Carbon, 29, 335 (1991). http://dx.doi.org/10.1016/0008-6223(91)90202-T. crossref(new window)

13.
Dhakate SR, Aoki T, Ogasawara T. High temperature tensile properties of 2D cross-ply carbon-carbon composites. Adv Mater Lett, 2, 106 (2011). http://dx.doi.org/10.5185/amlett.2010.12189. crossref(new window)

14.
Fitzer E, Manocha LM. Carbon Reinforcements and Carbon/ Carbon Composites. Springer-Verlag, Berlin, 44 (1998).

15.
Xianying Qin, Yonggen Lu, Hao Xiao, Ya Wen, Tian Yu. A comparison of the effect of graphitization on microstructures and properties of polyacrylonitrile and mesophase pitch-based carbon fibers. Carbon, 50, 4459 (2012), doi: 10.1016/j.carbon.2012.05.024. crossref(new window)