JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Novel reforming of pyrolized fuel oil by electron beam radiation for pitch production
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Carbon letters
  • Volume 15, Issue 4,  2014, pp.262-267
  • Publisher : Korean Carbon Society
  • DOI : 10.5714/CL.2014.15.4.262
 Title & Authors
Novel reforming of pyrolized fuel oil by electron beam radiation for pitch production
Jung, Jin-Young; Park, Mi-Seon; Kim, Min Il; Lee, Young-Seak;
  PDF(new window)
 Abstract
Pyrolized fuel oil (PFO) was reformed by novel electron beam (E-beam) radiation, and the elemental composition, chemical bonds, average molecular weight, solubility, softening point, yields, and density of the modified patches were characterized. These properties of modified pitch were dependent on the reforming method (heat or E-beam radiation treatment) and absorbed dose. Aromaticity (), average molecular weight, solubility, softening point, and density increased in proportion to the absorbed dose of E-beam radiation, with the exception of the highest absorbed dose, due to modification by free radical polymerization and the powerful energy intensity of E-beam treatment. The H/C ratio and yield exhibited the opposite trend for the same reason. These results indicate that novel E-beam radiation reforming is suitable for the preparation of aromatic pitch with a high -resin content.
 Keywords
pyrolized fuel oil;pitch;electron beam;reforming;-resin;
 Language
English
 Cited by
1.
석탄계 및 석유계 피치가 함침된 탄소/탄소 복합재료 제조 및 특성,양재연;박상희;박수진;서민강;

공업화학, 2015. vol.26. 4, pp.406-412 crossref(new window)
2.
Preparation and characterization of graphite foams,;;;

Journal of Industrial and Engineering Chemistry, 2015. vol.32. pp.21-33 crossref(new window)
3.
Characteristics of a high compressive strength graphite foam prepared from pitches using a PVA-AAc solution,;;

Journal of Industrial and Engineering Chemistry, 2015. vol.30. pp.127-133 crossref(new window)
1.
NO Gas Sensing of ACFs Treated by E-beam Irradiation in H2O2Solution, Transactions of the Korean hydrogen and new energy society, 2016, 27, 3, 298  crossref(new windwow)
2.
Controlling the electrochemical properties of an anode prepared from pitch-based soft carbon for Li-ion batteries, Journal of Industrial and Engineering Chemistry, 2016  crossref(new windwow)
3.
Preparation and characterization of graphite foams, Journal of Industrial and Engineering Chemistry, 2015, 32, 21  crossref(new windwow)
4.
Preparation and Characteristic of Carbon/Carbon Composites with Coal-tar and Petroleum Binder Pitches, Applied Chemistry for Engineering, 2015, 26, 4, 406  crossref(new windwow)
5.
Characteristics of a high compressive strength graphite foam prepared from pitches using a PVA–AAc solution, Journal of Industrial and Engineering Chemistry, 2015, 30, 127  crossref(new windwow)
6.
Effects of heat treatment time on aromatic yield of pyrolysis fuel oil-derived pitches, Carbon letters, 2016, 19, 104  crossref(new windwow)
7.
Effects of E-Beam Irradiation on the Chemical, Physical, and Electrochemical Properties of Activated Carbons for Electric Double-Layer Capacitors, Journal of Nanomaterials, 2015, 2015, 1  crossref(new windwow)
 References
1.
Greinke RA, O'Connor LH. Determination of molecular weight distributions of polymerized petroleum pitch by gel permeation chromatography with quinoline eluent. Anal Chem, 52, 1877 (1980). http://dx.doi.org/10.1021/ac50062a023. crossref(new window)

2.
Mora E, Blanco C, Santamariia R, Granda M, Menendez R. A novel method to obtain a petroleum-derived mesophase pitch suitable as carbon fibre precursor. Carbon, 41, 445 (2003). http://dx.doi.org/10.1016/S0008-6223(02)00354-8. crossref(new window)

3.
Dong W, Liu HC, Park SJ, Jin FL. Fracture toughness improvement of epoxy resins with short carbon fibers. J Ind Eng Chem, 20, 1220 (2014). http://dx.doi.org/10.1016/j.jiec.2013.06.053. crossref(new window)

4.
Mohammadi S, Afshar Taromi F, Shariatpanahi H, Neshati J, Hemmati M. Electrochemical and anticorrosion behavior of functionalized graphite nanoplatelets epoxy coating. J Ind Eng Chem, 20, 4124 (2014). http://dx.doi.org/10.1016/j.jiec.2014.01.011. crossref(new window)

5.
Greinke RA. Kinetics of petroleum pitch polymerization by gel permeation chromatography. Carbon, 24, 677 (1986). http://dx.doi.org/10.1016/0008-6223(86)90175-2. crossref(new window)

6.
Edwards WF, Jin L, Thies MC. MALDI-TOF mass spectrometry: obtaining reliable mass spectra for insoluble carbonaceous pitches. Carbon, 41, 2761 (2003). http://dx.doi.org/10.1016/S0008-6223(03)00386-5. crossref(new window)

7.
Mayani VJ, Mayani SV, Lee Y, Park SK. A non-chromatographic method for the separation of highly pure naphthalene crystals from pyrolysis fuel oil. Sep Purif Technol, 80, 90 (2011). http://dx.doi.org/10.1016/j.seppur.2011.04.013. crossref(new window)

8.
Alcaniz-Monge J, Cazorla-Amoros D, Linares-Solano A, Oya A, Sakamoto A, Hosm K. Preparation of general purpose carbon fibers from coal tar pitches with low softening point. Carbon, 35, 1079 (1997). http://dx.doi.org/10.1016/S0008-6223(97)00064-X. crossref(new window)

9.
Lewis IC. Thermal polymerization of aromatic hydrocarbons. Carbon, 18, 191 (1980). http://dx.doi.org/10.1016/0008-6223(80)90060-3. crossref(new window)

10.
Menendez R, Granda M, Fernandez JJ, Figueiras A, Bermejo J, Bonhomme J, Belzunce J. Influence of pitch air-blowing and thermal treatment on the microstructure and mechanical properties of carbon/carbon composites. J Microsc, 185, 145 (1997). http:// dx.doi.org/10.1046/j.1365-2818.1997.d01-608.x. crossref(new window)

11.
Vautard F, Ozcan S, Poland L, Nardin M, Meyer H. Influence of thermal history on the mechanical properties of carbon fiber-acrylate composites cured by electron beam and thermal processes. Composites A, 45, 162 (2013). http://dx.doi.org/10.1016/j.compositesa.2012.08.025. crossref(new window)

12.
Schlemmer B, Bandari R, Rosenkranz L, Buchmeiser MR. Electron beam triggered, free radical polymerization-derived monolithic capillary columns for high-performance liquid chromatography. J Chromatogr A, 1216, 2664 (2009). http://dx.doi.org/10.1016/j.chroma.2008.09.003. crossref(new window)

13.
Hwang JS, Lee CH, Cho KH, Kim MS, Kim CJ, Ryu SK, Rhee BS. Preparation of anisotropic/isotropic pitches from NCC-PFO. J Korean Inst Chem Eng, 33, 551 (1995).

14.
Chiono V, Carmagnola I, Gentile P, Boccafoschi F, Tonda-Turo C, Ballarini M, Georgieva V, Georgiev G, Ciardelli G. Layer-by-layer coating of photoactive polymers for biomedical applications. Surf Coat Technol, 206, 2446 (2012). http://dx.doi.org/10.1016/j.surfcoat.2011.10.048. crossref(new window)

15.
Wazir AH, Kakakhel L. Preparation and characterization of pitchbased carbon fibers. New Carbon Mater, 24, 83 (2009). http://dx.doi.org/10.1016/S1872-5805(08)60039-6. crossref(new window)

16.
Bayar S, Dincer HA, Gonca E. The synthesis of some phthalocyanines derived from bulky substituted phthalonitriles. Dyes Pigments, 80, 156 (2009). http://dx.doi.org/10.1016/j.dyepig.2008.06.006. crossref(new window)

17.
Heavy Oil Division, Refining Section of the Japan. Characterization of heavy oils and its application: an introduction. J Japan Petrol Inst, 24, 43 (1981). http://dx.doi.org/10.1627/jpi1958.24.43. crossref(new window)

18.
Yamada Y, Honda H, Abe T. Production of binder pitch from petroleum vacuum residue (part 1): relations between the properties of pitch obtained and heat-treatment conditions of vacuum residue. J Japan Petrol Inst, 18, 758 (1975). http://dx.doi.org/10.1627/jpi1958.18.758. crossref(new window)

19.
Musil J, Zatloukal M. Experimental investigation of flow induced molecular weight fractionation phenomenon for two linear HDPE polymer melts having same $M_n$ and $M_w$ but different $M_z$ and $M_{z+1}$ average molecular weights. Chem Eng Sci, 81, 146 (2012). http://dx.doi.org/10.1016/j.ces.2012.06.049. crossref(new window)

20.
Botman JIM, Derksen ATAM, van Herk AM, Jung M, Kuchta FD, Manders LG, Timmermans CJ, de Voigt MJA. A linear accelerator as a tool for investigations into free radical polymerization kinetics and mechanisms by means of pulsed electron beam polymerization. Nucl Instrum Methods Phys Res B, 139, 490 (1998). http://dx.doi.org/10.1016/S0168-583X(97)00948-8. crossref(new window)

21.
Kershaw JR, Black KJT. Structural characterization of coal-tar and petroleum pitches. Energy Fuels, 7, 420 (1993). http://dx.doi.org/10.1021/ef00039a014. crossref(new window)

22.
Kim JH, Lee SH, Lee YS. Preparation of pitch for melt-electrospinning from naphtha cracking bottom oil. Appl Chem Eng, 24, 402 (2013).

23.
Xu Y, Wang M, Ge X. The characterization of latex particles prepared by pulsed electron beam induced emulsion polymerization. Radiat Phys Chem, 81, 1634 (2012). http://dx.doi.org/10.1016/j.radphyschem.2012.05.001. crossref(new window)

24.
Oshida K, Bonnamy S. Primary carbonization of an anisotropic 'mesophase' pitch compared to conventional isotropic pitch. Carbon, 40, 2699 (2002). http://dx.doi.org/10.1016/S0008-6223(02)00184-7. crossref(new window)

25.
Zha QF, Shi JL, Ji Y, Liu L, Qian SA. The effect of composition and process variables on the spinnability of mesophase pitch. Carbon, 30, 739 (1992). http://dx.doi.org/10.1016/0008-6223(92)90156-Q. crossref(new window)

26.
Jung IH, Lee MJ, Mah YJ. Decomposition of PCBs in transformer oil using an electron beam accelerator. Radiat Phys Chem, 81, 899 (2012). http://dx.doi.org/10.1016/j.radphyschem.2011.12.042. crossref(new window)