Advanced SearchSearch Tips
Rate-capability response of graphite anode materials in advanced energy storage systems: a structural comparison
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Carbon letters
  • Volume 17, Issue 1,  2016, pp.39-44
  • Publisher : Korean Carbon Society
  • DOI : 10.5714/CL.2016.17.1.039
 Title & Authors
Rate-capability response of graphite anode materials in advanced energy storage systems: a structural comparison
Farooq, Umer; Doh, Chil-Hoon; Pervez, Syed Atif; Kim, Doo-Hun; Lee, Sang-Hoon; Saleem, Mohsin; Sim, Seong-Ju; Choi, Jeong-Hee;
  PDF(new window)
The work presented in this report was a detailed comparative study of the electrochemical response exhibited by graphite anodes in Li-ion batteries having different physical features. A comprehensive morphological and physical characterization was carried out for these graphite samples via X-ray diffraction and scanning electron microscopy. Later, the electrochemical performance was analyzed using galvanostatic charge/discharge testing and the galvanostatic intermittent titration technique for these graphite samples as negative electrode materials in battery operation. The results demonstrated that a material having a higher crystalline order exhibits enhanced electrochemical properties when evaluated in terms of rate-capability performance. All these materials were investigated at high C-rates ranging from 0.1C up to 10C. Such improved response was attributed to the crystalline morphology providing short layers, which facilitate rapid Li+ ions diffusivity and electron transport during the course of battery operation. The values obtained for the electrical conductivity of these graphite anodes support this possible explanation.
physical characterization;electrochemistry;graphite anodes;Li-ion batteries;energy storage;
 Cited by
Girishkumar G, McCloskey B, Luntz AC, Swanson S, Wilcke W. Lithium−air battery: promise and challenges. J Phys Chem Lett, 1, 2193 (2010). crossref(new window)

Sakti A, Michalek JJ, Fuchs ERH, Whitacre JF. A techno-economic analysis and optimization of Li-ion batteries for light-duty passenger vehicle electrification. J Power Sources, 273, 966 (2015). crossref(new window)

Winter M, Besenhard JO, Spahr ME, Novák P. Insertion electrode materials for rechargeable lithium batteries. Adv Mater, 10, 725 (1998).<725::aid-adma725>;2-z. crossref(new window)

Kang K, Meng YS, Breger J, Grey CP, Ceder G. Electrodes with high power and high capacity for rechargeable lithium batteries. Science, 311, 977 (2006). crossref(new window)

Tarascon JM, Armand M. Review article: issues and challenges facing rechargeable lithium batteries. Nature, 414, 359 (2001). crossref(new window)

Farooq U, Choi JH, Kim D, Pervez SA, Yaqub A, Hwang MJ, Lee YJ, Lee WJ, Choi HY, Lee SH, You JH, Ha CW, Doh CH. Electrically exploded silicon/carbon nanocomposite as anode material for lithium-ion batteries. J Nanosci Nanotechnol, 14, 9340 (2014). crossref(new window)

Yaqub A, Lee YJ, Hwang MJ, Pervez SA, Farooq U, Choi JH, Kim D, Choi HY, Cho SB, Doh CH. Low temperature performances of graphite and LiNi0.6Co0.2Mn0.2O2 electrodes in Li-ion batteries. J Mater Sci, 49, 7707 (2014). crossref(new window)

Park CM, Kim JH, Kim H, Sohn HJ. Li-alloy based anode materials for Li secondary batteries. Chem Soc Rev, 39, 3115 (2010). crossref(new window)

Pervez SA, Kim D, Farooq U, Yaqub A, Choi JH, Lee YJ, Doh CH. Comparative electrochemical analysis of crystalline and amorphous anodized iron oxide nanotube layers as negative electrode for LIB. ACS Appl Mater Interfaces, 6, 11219 (2014). http://dx.doi. org/10.1021/am501370f . crossref(new window)

Farooq U, Yaqub A, Choi JH, Pervez SA, Kim DH, Lee YJ, Doh CH. Metal-assisted silicon based negative electrode for Li-ion batteries. Mater Lett, 126, 291 (2014). crossref(new window)

Takami N, Inagaki H, Tatebayashi Y, Saruwatari H, Honda K, Egusa S. High-power and long-life lithium-ion batteries using lithium titanium oxide anode for automotive and stationary power applications. J Power Sources, 244, 469 (2013). crossref(new window)

Yu Y, Zhu Y, Lianga J, Fan L, Qian Y. Synthesis of a novel carbon network-supported Fe3O4@C composite and its applications in high-power lithium-ion batteries. Electrochim Acta, 111, 809 (2013). crossref(new window)

Ahmed B, Shahid M, Nagaraju DH, Anjum DH, Hedhili MN, Alshareef HN. Surface passivation of MoO3 nanorods by atomic layer deposition toward high rate durable Li-ion battery anodes. ACS Appl Mater Interfaces, 7, 13154 (2015). crossref(new window)

Mukherjee R, Krishnan R, Lu TM, Koratkar N. Nanostructured electrodes for high-power lithium ion batteries. Nano Energy, 1, 518 (2012). crossref(new window)

Yu L, Kim KJ, Park DY, Kim MS, Kim KI, Lim YS. Preparation and characterization of pitch/cokes composite anode material for high power lithium secondary battery. Carbon Lett, 9, 210 (2008). crossref(new window)

Bruce PG, Scrosati B, Tarascon JM. Nanomaterials for rechargeable lithium batteries. Angew Chem Int Ed, 47, 2930 (2008). crossref(new window)

Dahn JR, Seel JA. Energy and capacity projections for practical dual-graphite cells. J Electrochem Soc, 147, 899 (2000). crossref(new window)

Kim KJ, Lee TS, Kim HG, Lim SH, Lee SM. A hard carbon/microcrystalline graphite/carbon composite with a core-shell structure as novel anode materials for lithium-ion batteries. Electrochim Acta, 135, 27 (2014). crossref(new window)

de las Casas C, Li W. A review of application of carbon nanotubes for lithium ion battery anode material. J Power Sources, 208, 74 (2012). crossref(new window)

Brutti S, Hassoun J, Scrosati B, Lin CY , Wu H, Hsieh HW. A high power Sn–C/C–LiFePO4 lithium ion battery. J Power Sources, 217, 72 (2012). crossref(new window)

Bresser D, Mueller F, Buchholz D, Paillard E, Passerini S. Embedding tin nanoparticles in micron-sized disordered carbon for lithium- and sodium-ion anodes. Electrochim Acta, 128, 163 (2014). crossref(new window)

Park DY, Lim YS, Kim MS. Performance of expanded graphite as anode material for high power Li-ion secondary batteries. Carbon Lett, 11, 343 (2010). crossref(new window)

Pang H, Wang X, Zhang G, Chen H, Lv G, Yang S. Characterization of diamond-like carbon films by SEM, XRD and Raman spectroscopy. Appl Surf Sci, 256, 6403 (2010). crossref(new window)

Rani A, Nam SW, Oh KA, Park M. Electrical conductivity of chemically reduced graphene powders under compression. Carbon Lett, 11, 90 (2010). crossref(new window)

Nam S, Lee JM, Pukha VE, Seo HO, Kim YD, Lee HJ. Carbon anode thin films for lithium batteries. Curr Appl Phys, 14, 1010 (2014). crossref(new window)

Zhang WH. Calculation model of edge carbon atoms in graphite particles for anode of lithium-ion batteries. Trans Nonferrous Met Soc China, 21, 2466 (2011). crossref(new window)