JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Change of Mechanical Properties During Heat Treatment of Diecast ADC12 Alloy
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Journal of Korea Foundry Society
  • Volume 36, Issue 3,  2016, pp.88-94
  • Publisher : The Korean Foundrymens Society
  • DOI : 10.7777/jkfs.2016.36.3.88
 Title & Authors
Change of Mechanical Properties During Heat Treatment of Diecast ADC12 Alloy
Kang, Shin-Wook; Park, Kyeong-Seob; Oh, Eun-Ho; Shim, Jung-Il; Kim, Hee-Soo;
  PDF(new window)
 Abstract
We investigated the effect of heat treatment on an ADC12 alloy produced using diecasting. The heat treatment used in this study was a typical T6 process: a solid solution treatment followed by an artificial aging treatment. As-cast specimens were solid-solution-treated at and for 1-16 hr, and aged at and for 1-8 hr. Microstructural changes in the alloy during the heat treatment were observed. Changes in mechanical properties of the alloy were measured using a micro-Vickers hardness tester. Finally, we determined the optimal heat treatment conditions for the diecast ADC12 alloy.
 Keywords
Diecasting;Aluminum alloys;Heat treatment;Solid solution heat treatment;Artificial aging;
 Language
Korean
 Cited by
 References
1.
Beumler H, Hammerstad A, Wieting B and DasGupta R, AFS Transactions, "Analysis of Modified 319 Aluminum Alloy", 54 (1988) 1-12.

2.
Roy N, Samuel A and Samuel F, Metallurgical and Materials Transactions A, "Porosity Formation in Al-9 Wt pct Si-3 Wt pct Cu Alloy Systems: Metallographic Observations", 27 (1996) 415-429. crossref(new window)

3.
Kim SM, Woo KD, Kim JY, Kim SH, Park SH, Kang HJ and Park CS, J. Korea Foundry Society, "Effect of Heat Treatment on the Mechanical Properties of Investment Casting Turbo Charger Wheel Using A356 Alloy", 31 (2011) 262-266. crossref(new window)

4.
Kim OS, Kim YH, Lee KW and Kim HS, J. Korea Foundry Society, "A Study on Defect Control of Al-12%Si Alloy by Partial Squeeze Die Casting Method",15 (1995) 377-387.

5.
Davis JR, Aluminum and Aluminum Alloys, ASM International (1993).

6.
Polmear IJ, Light Alloys: Metallurgy of the Light Metals, Wiley (1995).

7.
Seo HS, Gu JH, Park KM, Lee JS, Lee JH and Chung WS, Korean Journal of Metals and Materials, "A Study on Microstructure Formation During Directional Solidification of a Hypoeutectic Al-11.3Si-3.5Cu alloy", 50 (2012) 897-905.

8.
Soni, S, Das S and Dixit G, International Journal of Advanced Engineering Technology, "Effect of Aging on the Mechanical Properties of Al-Si-SiC Particulate Composite", 2 (2011) 63-72.

9.
Soni S and Pandey A, International Journal of Advanced Mechanical Engineering, "Effect of Heat Treatment on Mechanical Behavior and Structural Response of Al-Si Composite", 7 (2014) 767-782.

10.
Telang A, Rehman A, Dixit G and Das S, Archives of Applied Science Research, "Effect of Reinforcement and Heat Treatment on the Friction Performance of Al Si Alloy and Brake Pad Pair", 2 (2010) 95-102.

11.
Wang G, Sun Q, Feng L, Hui L and Jing C, Materials & Design, "Influence of Cu Content on Ageing Behavior of AlSiMgCu Cast Alloys", 28 (2007) 1001-1005. crossref(new window)

12.
Li Y, Brusethaug S and Olsen A, Scripta Materialia, "Influence of Cu on the Mechanical Properties and Precipitation Behavior of AlSi7Mg0.5 Alloy During Aging Treatment", 54 (2006) 99-103. crossref(new window)

13.
Sjolander E and Seifeddine S, Journal of Materials Processing Technology, "The heat treatment of Al-Si-Cu-Mg casting alloys", 210 (2010) 1249-1259. crossref(new window)

14.
Sjolander E and Seifeddine S, Materials Science and Engineering A, "Artificial ageing of Al-Si-Cu-Mg casting alloys", 528 (2011) 7402-7409. crossref(new window)