Advanced SearchSearch Tips
Combustive Properties of Pinus rigida Plates Painted with Alkylenediaminoalkyl-Bis-Phosphonic Acid Salts (Mn+)
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Fire Science and Engineering
  • Volume 28, Issue 6,  2014, pp.28-34
  • Publisher : Korea Institute of Fire Science and Engineering
  • DOI : 10.7731/KIFSE.2014.28.6.028
 Title & Authors
Combustive Properties of Pinus rigida Plates Painted with Alkylenediaminoalkyl-Bis-Phosphonic Acid Salts (Mn+)
Park, Myung-Ho; Chung, Yeong-Jin;
  PDF(new window)
Two kinds of new piperazinomethyl-bis-phosphonic acid () were synthesized and their combustive properties of Pinus rigida plates treated with were tested in comparison with the previously synthesized chemicals. Pinus rigida specimens were painted in three times with 15 wt% solutions at the room temperature. After drying specimen treated with chemicals, combustive properties were examined by the cone calorimeter (ISO 5660-1). As a result, the combustion-retardation properties were partially increased by due to the treated solutions in the virgin Pinus rigida. Especially, the specimens treated with showed both the lower peak heat release rate () (173.48~145.36) s and total heat release rate (THRR) (73.0~55.2) than those of virgin piperazinomethyl-bis-phosphonic acid (PIPEABP)-plate. Compared with virgin PIPEABP-plate, the specimens treated with the showed low combustive properties. However the specimens treated with showed both the shorter time to ignition (TTI) (58~18) s and the time to flameout (Tf) (564~456) s than those of virgin PIPEABP-plate by increasing the thermal conductivity.
Alkylenediaminoalkyl-bis-phosphonic acid ();Time to ignition (TTI);Total heat released rate (THRR);Peak heat release rate (PHRR);
 Cited by
메틸렌피페라지노메틸-비스-포스폰산 금속염으로 처리된 시험편의 연소성,정영진;

공업화학, 2015. vol.26. 4, pp.505-510 crossref(new window)
연소 시험에서 발생하는 일산화탄소와 이산화탄소의 발생,정영진;

한국화재소방학회논문지, 2015. vol.29. 5, pp.7-13 crossref(new window)
인-질소 첨가제로 처리된 리기다 소나무 시험편의 연소특성,정영진;

한국화재소방학회논문지, 2015. vol.29. 6, pp.13-19 crossref(new window)
Combustive Properties of Specimens Treated with Methylenepiperazinomethyl-Bis-Phosphonic Acid (Mn+)s, Applied Chemistry for Engineering, 2015, 26, 4, 505  crossref(new windwow)
Production of Carbon Monoxide and Carbon Dioxide Gases in the Combustion Tests, Fire Science and Engineering, 2015, 29, 5, 7  crossref(new windwow)
Combustion Characteristics of Pinus rigida Specimens Treated with Phosphorus-Nitrogen Additives, Fire Science and Engineering, 2015, 29, 6, 13  crossref(new windwow)
E. Baysal, M. Altinok, M. Colak, S. K. Ozaki and H. Toker, "Fire Resistance of Douglas Fir (Psedotsuga menzieesi) Treated With Borates and Natural Extractives", Bioresour. Technol., Vol. 98, No. 5, pp. 1101-1105 (2007). crossref(new window)

O. Grexa, E. Horvathova, O. Besinova and P. Lehocky, "Falme Retardant Treated Plyood", Polym. Degrad. Stab., Vol. 64, No. 3, pp. 529-533 (1999). crossref(new window)

Y. J. Chung, "Comparison of Combustion Proprties of Native Wood Species Used for Fire Pots in Korea", J. Ind. Eng. Chem., Vol. 16, No. 1, pp. 15-19 (2010). crossref(new window)

Article 43 of Building Code, Article 61 of Enforcement Ordinance, "The Internal Finish Material of the Building" (2004).

Article 12 of Firefighting Basic Law, Article 20 of Decree, "The Subject Merchandise Flame and Flame Performance Standard" (2005).

P. W. Lee and J. H. Kwon, "Effects of the Treated Chemicals on Fire Retardancy of Fire Retardant Treated Particleboards", Mogjae-Gonghak, Vol. 11, No. 5, pp. 16-22 (1983).

T. S. Mcknight, "The hygroscopicity of Wood Treated With Fire-Retarding Compounds", Fore. Prod. Res. Branch, Dep. of Forestry, Canada. Report No. 190 (1962).

J. C. Middleton, S. M. Dragoner and F. T. Winters, Jr., "An Evaluation of Borates and other Inorganic Salts as Fire Retardants for Wood Products", Fore. Prod. J., Vol. 15, No. 12, pp. 463-467 (1965).

S. L. Levan and J. E. Winandy, "Effects of Fire Retardant Treatments on Wood Strength : A Review", Wood Fiber Sci., Vol. 22, No. 1, pp. 113-131 (1990).

C. A. Holmes, "Effect of Fire-Retardant Treatments on Performance Properties of Wood", Wood Technology: Chemical Aspects, ACS (1970).

R. Kozlowski and M. Hewig, "1st Int Conf. Progress in Flame Retardancy and Flammability Testing", Institute of Natural Fibres, Pozman, Poland (1995).

R. Stevens, S. E. Daan, R. Bezemer and A. Kranenbarg, "The Strucure-Activity Relationship of Retardant Phosphorus Compounds in Wood", Polym. Degrad. Stab., Vol. 91, No. 4, pp. 832-841 (2006). crossref(new window)

Y. J. Chung, Y. H. Kim and S. B. Kim, "Flame Retardant Properties of Polyurethane Produced by the Addition of Phosphorous Containing Polyurethane Oligomers (II)", J. Ind. Eng., Vol. 15, No. 6, pp. 888-893 (2009). crossref(new window)

Y. J. Chung, "Flame Retardancy of Veneers Treated by Ammonium Salts", J. Korean Ind. Eng. Chem., Vol. 18, No. 3, pp. 251-255 (2007).

M. L. Hardy, "Regulatory Status and Environmental Properties of Brominated Flame Retardants Undergoing Risk Assessment in the EU: DBDPO, OBDPO, PeBDPO and HBCD", Polym. Degrad. Stab., Vol. 64, No. 3, pp. 545-556 (1999). crossref(new window)

Y. Tanaka, "Epoxy Resin Chemistry and Technology", Marcel Dekker, New York (1988).

ISO 5660-1, "Reaction-to-Fire Tests-Heat Release, Smoke Production and Mass Loss Rate - Part 1: Heat Release Rate (Cone Calorimeter Method)", Genever (2002).

V. Babrauskas, "New Technology to Reduce Fire Losses and Costs", Eds. S. J. Grayson, D. A. Smith, Elsevier Appied Science Publisher, London, UK. (1986).

M. M. Hirschler, "Thermal Decomposition and Chemical Composition", 239, American Chemical Society Symposium Series 797 (2001).

Korean Patent, "Organic Phosphorus-Nitrogen Compounds, Manufacturing Method and Compositions of Flame Retardants Containing Organic Phosphorus-Nitrogen Compounds", No. 10-2011-0034978 (2011).

Y. J. Chung and E. Jin, "Synthesis of Alkylenediaminoalkyl- Bis-Phosphonic Acid Derivatives", J. of Korean Oil Chemist's Soc., Vol. 30, No. 1, pp. 1-8 (2013). crossref(new window)

E. Jin and Y. J. Chung, "Combustion Characteristics of Pinus rigida Plates Painted with Alkylenediaminoalkyl- Bis-Phosphonic Acid ($M^{n+}$)", Fire Sci. Eng., Vol. 27, No. 6, pp. 70-76 (2013). crossref(new window)

Cischem Com, "Flame Retardants", Chischem. Com. CO., Ltd. (2009).

W. T. Simpso, "Drying and Control of Moisture Content and Dimensional Changes", Chap. 12, wood Handbook- Wood as an Engineering Material, Forest Product Laboratory U.S.D.A., Forest Service Madison, Wisconsin, U.S.A. (1987).

J. C. Kotz, P. M. Treichel and G. C. Weaver, "Electron Transfer Reactions", Chemistry & Chemical Reactivity, Sixth Ed., Thomson Learning, Inc., Toronto, Canada (2006).

M. J. Spearpoint, "Predicting the Ignition and Burning Rate of Wood in the Cone Calorimeter Using an Intergral Model", NIST GCR 99-775, National Institute of Standards and Technology, Gaithersburg, U.S.A. pp. 1-21 (1999).

J. D. DeHaan, "Kirks's Fire Investigation", Fifth Edition, Prentice Hall, New Jersey, U.S.A. (2002).

V. Babrauskas, "Development of Cone Calorimeter-A Bench-Scale Heat Release Rate Apparatus Based on Oxygen Consumption", Fire and Materials, Vol. 8, No. 2, pp. 81-95 (1984). doi:1002/fam.810080206. crossref(new window)

V. Babrauskas and S. J. Grayson, "Heat release in Fires", E & FN Spon (Chapman and Hall), London, UK. (1992).

C. T. Xingcun, Advanced Materials for Thermal Management of Electronic Packaging, Springer Science & Business Media, USA (2011).

V. Babrauskas, "Heat Release Rate", Section 3, The SFPE Handbook of Fire Protection Engineering, Fourth Ed., National Fire Protection Association, Massatusetts, U.S.A. (2008).

M. J. Spearpoint and G. J. Quintiere, "Predicting the Burning of Wood Using an Integral Model", Combustion and Flame, Vol. 123, No. 3, pp. 308-324 (2000). crossref(new window)

J. G. Quintire, "Principles of Fire Behavior", Chap. 5, Cengage Learning, Delmar, U.S.A. (1998).