JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Plasticity and Fracture Behaviors of Marine Structural Steel, Part V: Effects of Strain Rate and Temperature
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Plasticity and Fracture Behaviors of Marine Structural Steel, Part V: Effects of Strain Rate and Temperature
Choung, Joon-Mo; Im, Sung-Woo; Kim, Kyung-Su;
  PDF(new window)
 Abstract
This is the fifth in a series of companion papers dealing with the dynamic hardening properties of various marine structural steels at intermediate strain rates. Five steps of strain rate levels (0.001, 1, 10, 100, 200/s) and three steps of temperature levels (LT (), RT, and HT ()) were taken into account for the dynamic tensile tests of three types of marine structural steels: API 2W50 and Classifications EH36 and DH36. The total number of specimens was 180 pieces. It was seen that the effects of dynamic hardening became clearer at LT than at RT. Dynamic strain aging accompanying serrated flow stress curves was also observed from high temperature tests for all kinds of steels. The dynamic hardening factors (DHFs) at the two temperature levels of LT and RT were derived at the three plastic strain levels of 0.05, 0.10, 0.15 from dynamic tensile tests. Meanwhile, no DHFs were found for the high temperature tests because a slight negative strain rate dependency due to dynamic strain aging had occurred. A new formulation to determine material constant D in a Cowper-Symonds constitutive equation is provided as a function of the plastic strain rate, as well as the plastic strain level. The proposed formula is verified by comparing with test flow stress curves, not only at intermediate strain rate ranges but also at high strain rate ranges.
 Keywords
Strain rate;Dynamic hardening factor(DHF);Cowper-Symonds constitutive equation;Dynamic strain aging;plastic strain;
 Language
Korean
 Cited by
1.
충돌하중을 받는 빙해선박 단일 늑골 구조의 소성변형에 관한 연구,민덕기;신동완;김신호;허영미;조상래;

대한조선학회논문집, 2012. vol.49. 3, pp.232-238 crossref(new window)
2.
국부가열에 따른 강재의 온도 및 강도 변화에 관한 실험적 연구,강성후;김민중;김성환;박선준;

한국방재학회 논문집, 2013. vol.13. 6, pp.115-121 crossref(new window)
1.
A Study on the Temperature and Strength Variation of Steel Plate due to the Local Heating, Journal of Korean Society of Hazard Mitigation, 2013, 13, 6, 115  crossref(new windwow)
 References
1.
American Society for Testing and Materials (ASTM) (2004). E 8-04 Standard Test Methods for Tension Testing of Metallic Materials.

2.
American Petroleum Institute (API) (2006), Recommended Practice 2FB: Design of Offshore Facilities Against Fire and Blast Loading.

3.
British Standard (BS) (1990). BS 5950: Part 8. Code of Practice for Fire Resistance Design.

4.
Choung, J., Cho, S. R., Kim, K. S. (2010). "Impact Test Simulations of Stiffened Plates Using the Micromechanical Porous Plasticity Model". Ocean Engineering, Vol 37, pp 749-756. crossref(new window)

5.
Choung, J., Shim, C.S., and Kim, K.S. (2011a). "Plasticity and Fracture Behaviors of a Marine Structural Steel, Part I: Technical Backgrounds of Strain Hardening and Rate Hardening". Journal of Ocean Engineering and Technology (to be published).

6.
Choung, J., Shim, C.S., and Kim, K.S. (2011b). "Plasticity and Fracture Behaviors of a Marine Structural Steel, Part II: Theoretical Backgrounds of Fracture". Journal of Ocean Engineering and Technology (to be published).

7.
Choung, J., Shim, C.S., and Kim, K.S. (2011c). "Plasticity and Fracture Behaviors of a Marine Structural Steel, Part III: Experimental Study on Failure Strain". Journal of Ocean Engineering and Technology (to be published).

8.
Choung, J., Im, S.W., Kim, K.S. (2011d). "Plasticity and Fracture Behaviors of a Marine Structural Steel, Part IV: Experimental Study on Mechanical Properties at ElevatedTemperatures". Journal of Ocean Engineering and Technology (to be published).

9.
European Committee for Standardisation (CEN) (1995).

10.
Eurocode 3: Design of Steel Structures. Part 1-2: General Rules-Structural Fire Design (EN 1993-2-1). Brussels, Belgium. CEN

11.
Health and Safety Executive (2001), Offshore Technology Report OTO 2001/020-Elevated Temperature and High Strain Rate Properties of Offshore Steels

12.
Huh, H., Lim, J. H., Song, J. H., Lee, K. S., Lee, Y. W., Han, S. S. (2003). "Crashworthiness Assessment of Side Impact of an Auto-Body with 60trip Steel for Side Members". International Journal of Automotive Technology, Vol 4, No 3, pp 149.156.

13.
Huh, H., Kim, S.B., Son, J.J., Lim, J.H. (2008). "Dynamic Tensile Characteristics of TRIP-type and DP-type Steel Sheets for an Auto-body". International Journal of Mechanical Sciences, Vol 50, pp 918-931 crossref(new window)

14.
Lee, H. J. and Kim, B. J. (2007). "A Study on the Application of Material Properties in Ship Collision Analysis", Proceedings of the Annual Autumn Meeting SNAK, pp 1050-1057

15.
Mahadevan, K., Liang, P., Fekete, J. (2000). "Effect of Strain Rate in Full Vehicle Grontal Crash Analysis". SAE Paper No. 2000-01-0625.

16.
Nemat-Nasser, S. and Guo, W.G. (2003). "Thermomechanical Response of DH-36 Structural Steel over a Wide Range of Strain Rates and Temperature", Mech. Mat., Vol 35, pp 1023-1047. crossref(new window)

17.
Paik, J.K., Thayamballi, A.T. (2007). Ship-Shaped Offshore Installations: Design, Building, and Operation. Cambridge University Press. New York, USA.