JOURNAL BROWSE
Search
Advanced SearchSearch Tips
UNSM Surface Technology for Manufacturing and Remanufacturing Torsion Bars for Crawler Vehicles
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
UNSM Surface Technology for Manufacturing and Remanufacturing Torsion Bars for Crawler Vehicles
Suh, Chang-Min; Pyoun, Young-Sik; Cho, In-Ho; Baek, Un-Bong;
  PDF(new window)
 Abstract
The Ultrasonic Nanocrystal Surface Modification (UNSM) technology improves the fatigue life of a torsion bar by inducing compressive residual stress on the surface layer. The UNSM is applied to replace the presetting method and shot peening technology. The torsion bar must be changed periodically because of a lack of durability and a phenomenon related to the stress relaxation. The torsion fatigue test specimens were made of DIN17221 material, and the results showed that the fatigue life was 5 times more than under durability test conditions. A comparison test between the commercial vehicles` presetting method and shot peened torsion bar and the UNSM torsion bar showed that the UNSM could replace the presetting method and shot peening.
 Keywords
Torsion bar;Remanufacturing;Ultrasonic nanocrystal surface modification UNSM;Presetting;Shot peening SP;Stress relaxation;
 Language
Korean
 Cited by
1.
군용 수중 운동물체의 성능강화를 위한 초소수성 나노 패터닝 기술,홍순국;이기영;

한국해양공학회지, 2013. vol.27. 2, pp.114-120 crossref(new window)
2.
SCM440H 금형강의 표면 처리에 따른 피로 특성 연구,염현호;이문구;이춘만;전용호;

한국정밀공학회지, 2013. vol.30. 8, pp.779-784 crossref(new window)
3.
FTS 를 이용한 표면처리 방법에 따른 공정특성 연구,이승준;이득우;김종만;이상민;김미루;장남수;;

한국정밀공학회지, 2014. vol.31. 12, pp.1127-1132 crossref(new window)
4.
FTS를 이용한 나노표면개질공정의 공정변화와 소재에 따른 표면특성,김미루;이득우;이승준;;김종만;장남수;

한국생산제조학회지, 2015. vol.24. 6, pp.639-646 crossref(new window)
1.
A study on Process Characteristics Using Fast Tool Servo based Surface Texturing, Journal of the Korean Society for Precision Engineering, 2014, 31, 12, 1127  crossref(new windwow)
 References
1.
Altenberger, I. (2005). "Deep Rolling - The Past, The Present and The Future", Proc. 9th Int. Conf. on Shot Peening, pp 144-155.

2.
Prevey, P. and Jayaraman, N. (2005). "Overview of Low Plasticity Burnishing for Mitigation of Fatigue Damage Mechanisms", Proc. 9th Int. Conf. on Shot Peening, pp 267-272.

3.
Suh, C.M., Kim, M.H., Baek, U.B., Pyun, Y.S., Kim, C.S. and Chi, C.H. (2010). "A Stduy on The Alternative Technonogy Using UNSM Instead of The Persetting Method for Torsion Bar", International journal of modern physics B, Vol 24, Nos 15-16, pp 2435-2440. crossref(new window)

4.
Suh, C.M., Lee, M.H. and Pyoun, Y.S. (2010). "Fatigue Characteristics of SKD-61 by Ultrasonic Nanocrystal Surface Modification Technology Under Static Load Variation", International journal of modern physics B, Vol 24, Nos 15-16, pp 2645-2650. crossref(new window)

5.
Suh, C.M., Pyun, Y.S. (2011). "Improvement of VHCF Properties of AISI 1045, 4137, 52100 & H13 Steel by UNSM Treatment", 2011년도 한국해양공학회 춘계학술대회.

6.
Suh, C.M., Song, G.H., Park, H.D. and Pyoun, Y.S. (2006). "A Study on the Mechanical Characteristic of Ultrasonic Cold Forged SKD61", Inter. Journal of Modern Physics B, Vol 20 Nos 25-27, pp 4541-4546. crossref(new window)

7.
Suh, C.M., Song, G.H., Suh, M.S. and Pyoun, Y.S. (2007). "Fatigue and Mechanical Characteristic of Nano-structured Tool Steel by Ultrasonic Cold Forging Technology", Materials Science and Engineering A 443, pp 101-106. crossref(new window)

8.
Thomas, M.B. (2002). "High Cycles Fatigue (HCF) Science and Technology Program 2001 Annual Report", AFRL-PRWP-TR-2002-2060.

9.
Watanabe, Y., Hasegawa, N. and Duchazeaubeneix J.M. (2003). "Effect of Ultrasonic Shot Peening on Fatigue Strength of High Strength Steel", Proc. 8th Int. Conf. on Shot Peening, pp 306-310.

10.
서창민, 편영식 (2011). "VHCF(>Mega cycle fatigue)와 표면처리 기술의 연구", 2011년도 한국해양공학회 춘계학술대회.

11.
편영식, 박정현, 조인호, 김창식, 서창민 (2009). "초음파 나노표면개질기술의 특성과 활용방안 연구", 대한기계학회논문집 (A), 33-3 pp 190-195. crossref(new window)