JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Development of Complex Energy Saving Device
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of Complex Energy Saving Device
Lee, Kwi-Joo; An, Jung-Sun;
  PDF(new window)
 Abstract
A complex energy saving device has been developed for middle class vessels. The propulsive performance of the developed device is described through a model test. The pre-swirl stator, which recovers the rotational energy of the propeller slipstream, is a well-known energy saving device for large vessels. The pre-swirl stator for a large vessel is usually cast as a part of the stern frame and has a high cost. The manufacture of a cast stator for an existing vessel is almost impossible. The complex device that was developed can be fitted on astern frame by welding. The model tests show a 4-6% efficiency gain for middle class vessels with the developed appendages compared to those with bare hulls.
 Keywords
Energy saving device;Stator;Complex energy saving device;
 Language
English
 Cited by
1.
A study on the Development of Energy-Saving Device "Crown Duct",;;;

한국해양공학회지, 2012. vol.26. 5, pp.1-4 crossref(new window)
2.
Comparative Study between Results of Theoretical Calculation and Model Test for Performance Confirmation of "Crown Duct",;;;

한국해양공학회지, 2014. vol.28. 1, pp.1-5 crossref(new window)
1.
A study on the Development of Energy-Saving Device "Crown Duct", Journal of Ocean Engineering and Technology, 2012, 26, 5, 1  crossref(new windwow)
2.
Comparative Study between Results of Theoretical Calculation and Model Test for Performance Confirmation of "Crown Duct", Journal of Ocean Engineering and Technology, 2014, 28, 1, 1  crossref(new windwow)
 References
1.
Asaumi. T., Ikeda. T., Tamashima. M. and Shinohara. H. (2006). "Effectiveness of an Energy Saving Device 'Friend Fin', Conference Proceedings". The Japan Society of Naval Architecture and Ocean Engineering, Vol 3, pp 261-264.

2.
Kang, Y.D., Kim, M.C., and Chun, H.H. (2004). "A Study on the Design of Biased Asymmetric Pre-swirl Stator Propulsion System", J. of Society of Naval Architects of Korea, Vol 41, No 3, pp 13-21. crossref(new window)

3.
Kim, M.C., Lee, J.T., Suh, J.C. and Kim, H.C. (1993). "A Study on the Asymmetric Preswirl Stator System" J. of Society of Naval Architects of Korea, Vol 30, No 1, pp 30-44.

4.
Lee, K.J., Joa, S.W., Parkm M. and Lee, Y.W. (1992). "An Experimental Study on the Ship Performance Improving Appendages" , Hull Form 92 Proceeding , 1.60-1.67.

5.
Lee, J.T., Kim, M.C., Suh, J.C., Kim, S.H. and Choi, J.K. (1992). "Development of a Preswirl Stator-Propeller System for Improvement of Propulsion Efficiency : a Symmetric Stator Propulsion System", Transactions of the Society of Naval Architects of Korea, Vol 29, No 4, pp 132-145.