Advanced SearchSearch Tips
Development of PEID for Acquiring Maintenance Information during Product Lifecycle of Marine Vessels
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of PEID for Acquiring Maintenance Information during Product Lifecycle of Marine Vessels
Jeon, Jeong-Ik; Lee, Jang-Hyun; Son, Gum-Jun;
  PDF(new window)
The product lifecycle of a marine vessel can be classified into the design-production, operation-maintenance, and disposal phases. During the operation and maintenance phase, status data should be gathered from the major machinery and instruments installed on the marine vessel in order to perform efficient maintenance work. Although a PLM (product lifecycle management) system can manage the product information during the design and assembly stage, a PLM based on asset management technology is more appropriate for product information management during the operation stage. Product embedded information devices (PEIDs) are suggested for gathering real-time maintenance information during the operation and maintenance lifecycle. A PEID allows PLM to provide the capability of offering active information exchange between the lifecycle management system and equipment. This study designed a PEID to effectively obtain information and interact with a PLM system. It consists of sensors, wireless communication, and a micro-processor, which allow it to accumulate status data on the PLM system. The embedded information device and PLM enable the seamless information flow, tracking, and updating of MRO (maintenance repair and overhaul) information for a product throughout the middle of the product lifecycle.
 Cited by
해양플랜트 LNG FPSO 압축기의 신뢰성 및 회귀분석 기반 고장시점 추정 방법,조상제;전홍배;신종호;최상덕;

한국CDE학회논문집, 2014. vol.19. 3, pp.203-213 crossref(new window)
LNG FPSO 압축기 고장시간 예측 방안에 관한 연구,조상제;전홍배;신종호;황호진;

산업경영시스템학회지, 2014. vol.37. 4, pp.12-23 crossref(new window)
A Study on Estimating the Next Failure Time of LNG FPSO Compressor, Transactions of the Society of CAD/CAM Engineers, 2014, 19, 3, 203  crossref(new windwow)
김승현, 이장현, 이경호, 박광필, 서흥원 (2010). "4-계층 모델 기반 의 선박 수명주기관리 시스템 프레임워크," 한국 CAD/AM 학회 논문집, 제15권, 제5호, pp 362-374.

김승현, 이장현, 손금준, 한은정 (2012). "선박해양구조물의 유지보수 단계 수명주기관리 정보 시스템의 개념 설계와 구현," 한국해양공학회지, 제26권, 제2호, pp 58-67. crossref(new window)

김진태, 권영미 (2006). "RFDI와 Zigebee를 이용한 유비쿼터스 u-ealth 시스템 구현", 2006년 전자공학회 논문지, 제43권, TC편 1호, pp 79-88.

소승욱 (2010). "선박 수명주기 관리를 위한 CMMS 개발 추진 사례," 2010 PLM 컨소시엄컨퍼런스.

이경호 (2004). "동시공학적 선박설계를 위한 웹 기반의 협업설계 시스템", 한국해양공학회지, 제18권, 제6호, pp 37-43.

정완영, 이승철 (2006). "신경회로망 알고리즘과 ATmega128칩을 활용한 자동차용 지능형 AQS 시스템", 제어․자동화․시스템공학 논문지, 제12권, 제6호, pp 539-546. crossref(new window)

황선기, 이상구 (2009) "ZigBee의 영상 전송을 이용한 침입자 탐지 시스템 구현", 보안공학연구논문지, 제6권, 제4호, pp 241-251.

Bodenhoefer, K., Schneider, A., Cock, T., Brooks, A., Sands, G., Allman, L., Simon, M., Chong, S.K., Yang, X., Delannoy, O., Catanese, B. and Mueller, K. (2004). "Environmental life cycle information management and acquisition: first experiences and results from field trials", Proceedings of the Conference on Electronics Goes Green 2004.

Chang, K.P., Rausand, M. and Vatn, J. (2008). "Reliability Assessment of Reliquefaction Systems on LNG Carriers", Reliability Engineering and System Safety, Vol 93, No 9, pp 1345-1353. crossref(new window)

Cao, H., Folan, P., Mascolo, J. and Browne, J. (2012). "RFID in Product Lifecycle Management: A Case in the Automotive Industry", International Journal of Computer Integrated Manufacturing, Vol 22, No 7, pp 616-637.

Dalpiaz, G., Rivola, A. and Rubini, R. (2000). "Mechanical Systems and Signal Processing", Vol 14, No 3, pp 387-412. crossref(new window)

DnV (2000). Technical Paper-Hot Surfaces in Engine Rooms Paper Series No. 2000-P025.

EPCglobal (2006). EPC Information Services (EPCIS) Version 1.0 Specification, working draft.

Fernandez, J.F. and Marquez, A.C. (2009). "Framework for Implementation of Maintenance Management in Distribution Network Service Providers", Reliability Engineering & System Safety, Vol 94, No 10, pp 1639-1649. crossref(new window)

Firmtech (2003). Zigbee Embedded Modules FZ750BS/FZ750BC Manual VERSION 0.1.7, Firmtech Co., Ltd.

Forss, B., Petrow, J., Framling, K., Dikici, C. and Anke, J. (2006). PROMISE DR6.5: interface definition and design of enterprise communication infrastructure.

Grall, A., Berengure, C. and Dieulle, L. (2002). "A Conditionbased Maintenance Policy for Stochastically Deteriorating Systems", Reliability Engineering and System Safety, Vol 76, pp 167-180. crossref(new window)

Gulledge, T., Hiroshige, S. and Iyer, R. (2010). "Conditionbased Maintenance and the Product Improvement Process", Computers in Industry, Vol 61, No 9, pp 813-832. crossref(new window)

Jakkhupan, W., Arch-int, S. and Li, Y. (2011). "Business Process Analysis and Simulation for the RFID and EPCglobal Network Enabled Supply Chain: A Proof-ofconcept Approach", Journal of Network and Computer Applications, Vol 34, No 3, pp 949-957. crossref(new window)

Jardine, A.K.S., Lin, D. and Banjevic, D. (2006). "A Review on Machinery Diagnostics and Prognostics Implementing Condition-based Maintenance", Mechanical Systems and Signal Process, Vol 20, No 7, pp 1483-1510. crossref(new window)

Jun, H.B., Kiritsis, D., and Xiouchakis, P. (2007). "Research Issues on Closed-loop PLM", Computers in Industry, Vol 58, No 8-9, pp 855-868. crossref(new window)

Jun, H.B., Shin, J.H., Kim, Y.S., Kiritsis, D. and Xirouchakis, P. (2009). "A Framework for RFID Applications in Product Lifecycle Management", International Journal of Computer Integrated Manufacturing, Vol 22, No 7, pp 595-165. crossref(new window)

Kim, S.H., Lee, J.H., Kim, K.S. and Jeon, J.I. (2010). "An Implementation Enterprise BOM for Marine Vessel of Pipe Equipment", Transactions of the Society of CAD/ CAM Engineers, Vol 16, No 1, pp 41-51.

Kiritsis, D. (2011). "Closed-loop PLM for Intelligent Products in the Era of the Internet of Things," Computer-Aided Design, Vol 43, No 5, pp 479-501. crossref(new window)

Liu, Z., Yin, X., Zhang, Z., Chen, D. and Chen, W. (2004). "Online Rotor Mixed Fault Diagnosis Way Based on Spectrum Analysis of Instantaneous Power in Squirrel Cage Induction Motors", IEEE Transactions on Energy Conversion, Vol 19, No 3, pp 485-490. crossref(new window)

Lopez, T.S. (2011) "RFID and Sensor Integration Standards: State and Future Prospects", Computer Standards & Interfaces, Vol 33, No 3, pp 207-213. crossref(new window)

Miller, A.J. (1999). "A New Wavelet Basis for the Decomposition of Gear Motion Error Signals and its Application to Gearbox Diagnostics", M.Sc. Thesis, The Pennsylvania State University.

MIMOSA (2010). OpenO&MTM CIR Specification A Common Interoperability Registry V1.0.

Moore, P.R., Pu, J., Xie, C., Simon, M. and Bee, G. (2000). "Life Cycle Data Acquisition Methods and Devices" Proceedings of the 7th Mechatronics Forum International Conference (Mechatronics 2000).

Muller, A., Marquez, A.C. and Iung, B. (2008). "On the Concept of E-maintenance: Review and Current Research", Reliability Engineering and System Safety, Vol 93, No 8, pp 1165-1187. crossref(new window)

Park, H.S. and Choi, W.S. (2005). "Disassembly Process Planning of End-of-Life Car", International Journal of Precision Engineering and Manufacturing, Vol 6, No 1, pp 42-50.

Pandian, A. and Ali, A. (2010). "A Review of Recent Trends in Machine Diagnosis and Prognosis Algorithms", International Journal of Computer Information Systems and Industrial Management Applications, Vol 2, pp 320-328.

Simon, M., Allman, L., Moore, P.R., Yang, X. and Cock, T. (2004). "Product Design Informed by Lifecycle Information: Initial Results from ELIMA", Proceedings of the 2nd International Conference on Manufacturing Research (ICMR2004), pp 103-122.

Simon, M. Bee, G., Moore, P.R, Pu, J. and Xie, C. (2000). "Life Cycle Data Acquisition Unit-design, Implementation, Economics and Environmental Benefits," Proceedings of the IEEE International Symposium on Electronics & the Environment, pp 284-289.

Thomas, G., Scott, H. and Raj, I. (2010). "Condition-based Maintenance and the Product Improvement Process", Computers in Industry, Vol 61, No 9, pp 813-832. crossref(new window)

Xiaoyu, Y., Philip, M. and Seng, K.C. (2009). "Intelligent Products: From Lifecycle Data Acquisition to Enabling Product-related Services", Computers in Industry, Vol 60, No 3, pp 184-194. crossref(new window)

Wang, Y., Linch, J.P. and Law, K.H. (2007). "Wireless Sensing Technologies for Civil Infrastructure Monitoring and Management", 5th International Symposium for Safety of Infrastructure, U-Safety for Infrastructure.

Williams, J.H., Davies, A. and Drake, P.R. (1994). "Condition Based Maintenance and Machine Diagnostics", Chapman & Hall.

Yang, X., Moore, P. and Chong, S.K. (2009). "Intelligent products: From Lifecycle Data Acquisition to Enabling Productrelated services", Computers in Industry, Vol 60, No 3, pp 184-194. crossref(new window)