JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Experimental Study on Unconfined Compression Strength and Split Tensile Strength Properties in relation to Freezing Temperature and Loading Rate of Frozen Soil
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Experimental Study on Unconfined Compression Strength and Split Tensile Strength Properties in relation to Freezing Temperature and Loading Rate of Frozen Soil
Seo, Young-Kyo; Choi, Heon-Woo;
  PDF(new window)
 Abstract
Recently the world has been suffering from difficulties related to the demand and supply of energy due to the democratic movements sweeping across the Middle East. Consequently, many have turned their attention to never-developed extreme regions such as the polar lands or deep sea, which contain many underground resources. This research investigated the strength and initial elastic modulus values of eternally frozen ground through a uniaxial compression test and indirect tensile test using frozen artificial soil specimens. To ensure accurate test results, a sandymud mixture of standard Jumunjin sand and kaolinite (20% in weight) was used for the specimens in these laboratory tests. Specimen were prepared by varying the water content ratio (7%, 15%, and 20%). Then, the variation in the strength value, depending on the water content, was observed. This research also established three kinds of environments under freezing temperatures of , , and . Then, the variation in the strength value was observed, depending on the freezing environment. In addition, the tests divided the loading rate into 6 phases and observed the variation in the stress-strain ratio, depending on the loading rate. The test data showed that a lower freezing temperature resulted in a larger strength value. An increase in the ice content in the specimen with the increase in the water content ratio influenced the strength value of the specimen. A faster load rate had a greater influence on the uniaxial compression and indirect tensile strengths of a frozen specimen and produced a different strength engineering property through the initial tangential modulus of elasticity. Finally, the long-term strength under a constant water content ratio and freezing temperature was checked by producing stress-strain ratio curves depending on the loading rate.
 Keywords
Frozen soil;Uniaxial compression test;Indirect tensile test;Freezing temperature;Axial strain rate;Initial tangent modulus;
 Language
Korean
 Cited by
 References
1.
Americal Society for Testing and Materials, 1982. ASTM Standard, Part 19, Philadelphia, Pa.

2.
Cho, C.W., Shon, J.I., Lee, W.J., Kim, H.S., 1993. A Study on the Properties of Frozen Soil and Pile Foundation in Frozen Ground. Korea Institute of Construction Technology.

3.
Choi, K.S., 1990. An Application of Plasticity Model for Ice Deformation Characteristics. Journal of The Korean Society of Ocean Engineers, 4(2), 165-171.

4.
Choi, M.S., 2009. A Study of Different Size for Strength Properties of Frozen Soil. Master's Thesis of Korea Maritime University.

5.
Choi, Y.C., 1991. The Properties and Construction of Permafrost: State of the Art. Master's Thesis of Seoul National University.

6.
Corapcioglu, M.Y., 1995. Multiphase Approach to Thaw Subsidence of Unsaturated Frozen Soils : Equation Development. Journal of Engineering Mechanics, 121(3), 448-459. crossref(new window)

7.
Freitag, D.R., McFadden, T.T., 1997. Introduction to Cold Regions Engineering. ASCE.

8.
Gregory, D.R., 2003. Triaxial Testing of Frozen Sand : Equipment and Example Results. Journal of Cold Regions Engineering, 17(3), 90-118. crossref(new window)

9.
Hong, S.S., Kim, Y.S., Kim, H.S., Bae, G.J., 2010. A Fundamental Study of Artifical Ground Freezing. 2010 Korean Geo-Environmental Society Fall Conference.

10.
Hong, S.W., 1992. Development of Effective Methods for Design and Construction of Foundations in Cold Regions. The Ministry of Science-Technology.

11.
Kim, E.S., 2006. A Study of Cold Room Experiments for Strength Properties of Frozen Soil. Master's Thesis of Korea Maritime University, 22-55.

12.
Kim, Y.C., Bae, J.H., Song, W.K., 2003. An Experimental Study on the Unfrozen Water Contents and Ultrasonic Wave Velocity in Frozen Soil. Journal of Korean Society of Civil Engineers 23, 207-217.

13.
Kim, Y.C., Hong, S.S., 2005. A Study for Pentration Depth in Pavement in Korea. 2005 Korean Geo-Environmental Conference.

14.
Kim, Y.C., Hong, S.S., Kang, J.M., Kim, H.S., Choo, J.H., 2009. A Study on the Frost Penetration Depth and Insulation Methods in Pavement. Korea Institute of Construction Technology.

15.
Kim, Y.C., Hong, S.S., Kim, H.M., 2001. A Study on the Frost Penetration Depth and Insulation Methods in Pavement. Korea Institute of Construction Technology.

16.
Konrad, J.M., 2001. Fracture toughness of frozen base and subbase soils in pavement. Canadian Geotechnical Journal, 38(5), 967-981. crossref(new window)

17.
Korean Industrial Standard KS F 2343 (Testing Method for Direct Shear test of Soils under Consolidated Drained Conditions), KS F 2423 (Method of Test for Splitting Tensile Strength of Concrete).

18.
Ku, K.D., Kim, K.S., 2000. An Experimental Study on the Concrete Compression Strength According to Loading Rates. Journal of Architectural Institute of Korea Conference, 20(2), 432-434.

19.
Kwon, H.J., Park, J.B., Song, Y.W., Lee, Y.S., 2005. Principles of Geotechnical Engineering, Goomibook, 47-59, 60-66, 131.

20.
Nakano, Y., Froula, N.H., 1973. Sound and Shock Transmission in Fronzen Soil. North America Contribution to the Second International Conference on Permafrost, U. S. National Academy of Science, 359-369.

21.
Ning Li, 2000. The Coupled Heat-Moisture-Mechanic Model of the Frozen Soil. Cold Regions Science and Technology, 31(3), 199-205. crossref(new window)

22.
Richard A.B., Andersland O.B., 1981. Strain Rate, Temperature, and Sample Size Effects on Compression and Tensile Properties of Frozen Sand. Engineering Geology, 18, 35-46. crossref(new window)

23.
Wang, D., 2005. Study on the Resistance to Deformation of Artificially Frozen Soil in Deep Alluvium. Cold Regions Science and Technology, 42(3), 194-200. crossref(new window)