JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Experimental and Numerical Study on Slamming Impact
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Experimental and Numerical Study on Slamming Impact
Kwon, Sun Hong; Yang, Young Jun; Lee, Hee Sung;
  PDF(new window)
 Abstract
This paper presents the results of experimental and numerical research on the slamming phenomenon. Two experimental techniques were proposed in this study. The traditional free drop tests were carried out. However, the free drop tests done in this study using an LM guide showed excellent repeatability, unlike those of other researchers. The coefficients of variation for the drop test done in this experiment were less than 0.1. The other experimental technique proposed in this study was a novel concept that used a pneumatic cylinder. The pneumatic cylinder could accelerate the specimen over a very short distance from the free surface. As a result, high rates of repeatability were achieved. In the numerical study, the development of in-house code and utilization of commercial code were carried out. The in-house code developed was based on the boundary element method. It is a potential code. This was mostly applied to the computation of the wedge entry problem. The commercial code utilized was FLUENT. Most of the previous slamming research was done under the assumption of a constant body velocity all through the impact process, which is not realistic at all. However, the interaction of a fluid and body were taken into account by employing a user-defined function in this study. The experimental and numerical results were compared. The in-house code based on BEM showed better agreement than that of the FLUENT computation when it cames to the wedge computation. However, the FLUENT proved that it could deal with a very complex geometry while BEM could not. The proposed experimental and numerical procedures were shown to be very promising tools for dealing with slamming problems.
 Keywords
Slamming impact;Free fall;LM-Guide;Air pressure cylinder;Boundary element method;FLUENT;User defined function;
 Language
English
 Cited by
1.
상대수직속도를 고려한 파랑중 선박의 슬래밍 충격하중 및 응답 계산,최문관;박인규;구원철;

대한조선학회논문집, 2014. vol.51. 6, pp.503-509 crossref(new window)
1.
Numerical Prediction of Slamming Impact Loads and Response on a Ship in Waves Considering Relative Vertical Velocity, Journal of the Society of Naval Architects of Korea, 2014, 51, 6, 503  crossref(new windwow)
 References
1.
Arai, M., Cheng, L.Y., Inoe, Y., 1994. A computing method for the analysis of water impact of arbitrary shaped bodies. J. Soc. Naval Arch. Japan, 176.

2.
Armand, J.L., Cointe, R., 1986. Hydrodynamic impact analysis of a cylinder. Proc. Fifth Int. Offshore Mech. And Arctic Engng. (OMAE). Tokyo, Japan, 1, 609-634.

3.
Chuang, S.L., 1966. Experiments on flat-bottom slamming. Journal of Ship Research, 10-17.

4.
Cointe, R., 1991. Free surface flows close to a surface-piercing body. In Mathematical Approaches in Hydrodynamics (ed. T. Miloh), Soc. Ind. Appl. Maths, Philadelphia, USA, 319-334.

5.
Dobrovol'skaya, Z.N., 1969. On some problems of similarity flow of fluid with a free surface. J. Fluid Mech. 36(4), 805- 829. crossref(new window)

6.
Faltinsen, O.M., 1990. Sea loads on ships and offshore structures. Cambridge University Press.

7.
Fraenkel, E., 1991. On the water entry of a wedge. The Mathematics of Nonlinear Systems, SERC Meeting, Bath.

8.
Garabedian, P.R., 1953. Oblique water entry of a wedge. Commun. Pure Appl. Maths 6, 157-165. crossref(new window)

9.
Greenhow, M., 1987. Wedge entry into initially calm water. Appl. OceanRes. 9, 214-223. crossref(new window)

10.
Howison, S.D., Ockendon, J.R., Wilson,S.K., 1991. Incompressible water-entry problem at small deadrise. J. Fluid Mech. 222, 215-230. crossref(new window)

11.
Hughes, O.F., 1972. Solution of the wedge entry problem by the numerical conformal mapping. J. Fluid Mech. 56, 173-192. crossref(new window)

12.
Jung, D.J., Park, J.S., Kwon, S.H., Pack, S.W., Jung, J.Y., 2002a. A note on slamming experiment. Proceedings of the 47th Workshop on Ocean Engineering, 55-62.

13.
Jung, D.J., Park, J.S., Kwon, S.H., Pack, S.W., Jung, J.Y., 2002b. Feasibility study of usage of air pressure cylinder on slamming experiment. Proceedings of the Annual Autumn Meeting, KCORE, 229-233.

14.
Kim, B., Shin, Y.S., 2003. An efficient numerical method for a solution of two-dimensional hydrodynamic impact problems. Proceedings of the 13th International Offshore and Polar Engineering Conference, HonoluluHawaii, May, 25-30.

15.
Korobkin, A.A., Pukhnachov, V.V., 1988. Initial stage of water impact. Ann. Rev. Fluid Mech. 10, 159-185.

16.
Korobkin, A., 1996. Water impact problems in ship hydrodynamics. Advances in Marine Hydrodynamics (Editor : M. Okushu), 323-371.

17.
Korobkin, A.A., 1988. Water impact problems in ship hydrodynamics. Ch. 7 in Advances in Marine Hydrodynamics, (ed : Ohkusu, M.) Computational Mechanics Publications, Southampton, Boston.

18.
Kwon, S.H., Jung, D.J., Park, J.S., Pack, S.W., Chung, J.Y., 2003. An alternative experiment for slamming using an air pressure cylinder. Proceedings of the thirteenth International Offshore and Polar Engineering Conference Honolulu, Hawaii, USA, 542-548.

19.
May, A., Baldwin, J.L., Walker, W.A., Goeller, J.E., 1979. Hydro ballistic design handbook. 1, SEAHACTR79-1, January.

20.
Mackie, A.G., 1969. The water entry problem. O. J. Mech. Appl. Maths 22, 1-17. crossref(new window)

21.
Mei, X., Liu, Y., and Yue, D.K.P., 1999. On the water impact of general two-dimensional sections. Applied Ocean Research 21, 1-15. crossref(new window)

22.
SNAME, 1993. Notes on ship slamming. Technical and Research Bulletin 2-30, The Society of Naval Architects and Marine Engineers.

23.
Takemoto, H., 1984. Some considerations on water impact pressure. J. Soc. Navel Arch. Japan 156, 314-322.

24.
Von Karman, T., 1929. The impact on sea plane floats during landing. NACA Technical Note 321.

25.
Wagner, H., 1932. Uber stoss-und gleitvergange an der ober fläche von flussigkeiten. Z. Angew. Math. 12(4), 193-215. crossref(new window)

26.
Watanabe, T., 1986. Analytical expression of hydrodynamic impact pressure by matched asymtotic expansion technique. Trans. West-Japan Soc. Naval Arch. 71, 77-85.

27.
Yamamoto, Y., Ohtsubo, H., Kohno, Y., 1984. Water impact of wedge model. J. Soc. Naval Arch. Japan, 155, 236-245.

28.
Zhao, R., Faltinsen, O., 1993. Water entry of two-dimensional bodies. J. Fluid Mech. 246, 593-612. crossref(new window)

29.
Zhao, R., Faltinsen, O.M., Aarsnes, J.V., 1996. Water entry of arbitrary two-dimensional sections with and without flow separation. Proceedings 21st Symposium on Naval Hydrodynamics, Trondheim, Norway, 408-423.