JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Study on Flow Analysis of Three-Dimensional Screw Propeller With Respect to Rotational Speed Variable
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Study on Flow Analysis of Three-Dimensional Screw Propeller With Respect to Rotational Speed Variable
Moon, Byung-Young; Sun, Min-Young; Lee, Ki-Yeol;
  PDF(new window)
 Abstract
This study aimed at conducting a flow analysis of the pressure distribution, discharge flow rate, and consequent thrust force according to the rotational speed of a three-dimensional screw propeller, and then investigating the effect of the rotational speed on the characteristics of the screw propeller by varying the relevant speed (3200, 2400, 1600, 800 rpm). In particular, the computational domain was considered by the analysis in the blades and outlet chamber, using boundary conditions. The difference between the minimum and maximum pressures was 5.5 MPa under the given conditions. The discharge flow rate at this pressure difference was on the level of 1956.67 kg/s, as a thrust force of 47083.7 T(N) was obtained. This study showed that the discharge flow rate linearly increased with the rotational speed, proportional to the RPM, while the thrust force was gradually and steadily increased with the relevant speed. In addition, it was proved that the occurrence of cavitation under the given conditions was closely related to the decrease in the durability of the screw propeller because the thrust force depends on the speed.
 Keywords
Pressure distribution;Cavitation;Flow analysis;Rotational speed;3-dimensional Screw Propeller;Pressure distridution;Discharge flow rate;Thrust force;
 Language
English
 Cited by
 References
1.
Burrill, L.C., Emerson, A., 1963. Propeller Cavitation : Further Tests on 16 in. Propeller Models in the King's College Cavitation Tunnel. Transactions North East Coast Institution of Engineers and Shipbuilders, 79, 295-320.

2.
Carlton, J.S., 2007. Marine Propellers and Propulsion. 2nd Edn., Butterworth-Heinemann, Oxford, UK.

3.
Emerson, A., Sinclair, L., 1967. Propeller Cavitation : Systematic Series of Tests on Five and Six Bladed Model Propellers. Tansactions of the Society of Naval Architects and Marine Engineers, 75, 224-267.

4.
Gawn, R.W.L., Burrill, L.C., 1957. Effect of Cavitation on the Performance of a Series of 16 in. Model Propellers. Transactions of the Oyal Institution of Naval Architects, 99, 690-728.

5.
Homer, A.F.S., 2007. Simulation of Original Versions. Ocean Engineering, 24(8), 765-783.

6.
Kiam, B.Y., Wen, Y.H., 2014. Fundamentals of Marine Propeller Analysis. Journal of Applied Science 14 (10): 1078-1082. crossref(new window)

7.
Molland A.F., Turnock, S.R., Hudson, D.A., 2013. Ship Resistance and Propulsion: Practical Estimation of Ship Propulsive Power. 2nd Edn., Cambridge University Press, UK.

8.
Schoenherr, K.E., 1963. Formulation of Propeller Blade Strength. Transactions of the Society of Naval Architects and Marine Engineers, 71, 81-119.

9.
Subhas, S., Saji, V.F., Ramakrishna S., Das, H.N., 2012. CFD Analysis of a Propeller Flow and Cavitation. Int. J. Comput. Appl., 55: 26-33.

10.
Tommy, S.H., Thomson, A., 1990. A Mumerical Model of the Rough Turbulent Boundary Layer in Combined Wave and Current Interaction. In: Euromech 262-Sand Transport in Rivers, Estuaries and the Sea, Balkema, Rotterdam. R.L. Soulsby, R. Bettes (Eds.). 993-1000.

11.
Versteea, B., Malalas, R.W., 1990. An Introduction to Computational Fluid Dynamics: the Finite Volume Method. New York, NY : McGraw-Hill.