JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Measurement of Real Deformation Behavior in C-type Lng Mock-up Tank using Strain Gage
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Measurement of Real Deformation Behavior in C-type Lng Mock-up Tank using Strain Gage
Jung, Won-Do; Kim, Tae-Wook; Kim, Jeong-Hyeon; Lee, Do-Young; Chun, Min-Sung; Lee, Jae-Myung;
  PDF(new window)
 Abstract
A C-type LNG mock-up tank was constructed to evaluate the durability of the tank and its structural safety. An experimental strain analysis system equipped with strain gages was designed to investigate the structural behavior of the inner tank at a high hydraulic pressure. In addition, the insulation used in the space between the inner tank and outer tank had a compressive strength and the inner tank thickness of the cylindrical shell and hemisphere was 4.0 mm, which was designed to be thinner than the existing rules. The strains on the inner tank were measured with increasing pressure, and these measurements were compared and analyzed at the strain gage attachment points.
 Keywords
IMO C-type tank IMO C;Mock-up test;Hydraulic test;Strain gage;Structural strength;
 Language
Korean
 Cited by
 References
1.
American Bureau of Shipping (ABS), 2011. Propulsion and Auxiliary Systems for Gas Fueled Ships.

2.
Det Norske Veritas (DNV), 2010. Greener Shipping in the Baltic Sea, Technical report.

3.
Det Norske Veritas (DNV), 2011, Greener Shipping in North America, Technical report.

4.
International Maritime Organization (IMO), 2010. International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk.

5.
Kang, D.M., 1993. Stress Measurements Using Strain Gages. Journal of the Korean Society of Mechanical Engineers, 33(7), 661-670.

6.
Kim, J.H., Yoon, I.S., 2009. Stability Evaluation of Closed Mock-up Tank for Developing Korean LNG Carrier Cargo Containment System. Proceedings of the Korean Society of Mechanical Engineers Conference, 470-475.

7.
Kim, J.K., Kim, C.S., Kim, D.S., Yoon, I.S., 2000. Fatigue Crack Growth Behavior of Membrane Material for LNG Storage Tank at Low Temperature. Journal of Ocean Engineering and Technology, 14(1), 23-28.

8.
Kim, K.S., Boo, S.H., Park, C.Y., Cho, Y.G., Lee, J.S., 2008. An Experimental Study on the Tensile and Fatigue Strengths of SUS304L Lap Joint Weld at the Cryogenic Temperature. Journal of Ocean Engineering and Technology, 22(3), 96-102.

9.
Kim, T.W. Suh, Y.S., Jang, K.B., Chun, M.S., Lee, K.D., Cha, K.H., 2012. A Study and Design on Tank Container for Fuel Tank of LNG Fueled Ship. Journal of the Society of Naval Architects of Korea, 49(6), pp. 504-511. crossref(new window)

10.
Kim, Y.K., Yoon, I.S., Oh, B.T., Hong, S.H., Yang, Y.M., 2004. The Measurement of Real Deformation Behavior in Pilot LNG Storage Tank Membrane by using Strain Gage. Proceedings of the Korean Society of Mechanical Engineers Conference, 108-113.

11.
Kim, Y.K., Hong, S.H., Oh, B.T., Yoon, I.S., Kim, J.H., Kim, S.S., 2003. The Measurement of Membrane Deformation Behavior in Kogas Pilot LNG Storage Tank by the use of Mechanical/Electrical Sensor(I). Proceedings of the Korean Institute of Gas Spring Conference, 159-164.

12.
Kim, Y.K., Yoon, I.S., Oh, B.T., Woo, H.H., Yang, Y.M., 2010. Construction of KOGAS Closed Mock-up tank for LNG Carrier application. Proceedings of the Korean Institute of Gas Autumn Conference, 36-39.

13.
Lee, H.S., Yoon, J.H., Park, J.S., Yi, Y.M., 2005. A Study on Failure Characteristic of Spherical Pressure Vessel. Journal of Materials Processing Technology, 164-165, 882-888. crossref(new window)

14.
Lee, J.H., Kim, Y.J. Hwang, S.Y., 2014. Numerical Model of Heat Diffusion and Evaporation by LNG Leakage at Membrane Insulation. Journal of Ocean Engineering and Technology, 28(6), 517-526. crossref(new window)

15.
Yim, S.S., Jang, K.M., Lee, J.H., Choi, Y.R., Kim, K.B., 2014. A Study on the Propensity for the Deformation and Failure of a Small Pressurized Cylinder. Journal of Energy Engineering, 23(3), 146-149. crossref(new window)