W. E. Baker, J. H. Smith and W. A. Winner, “Vulnerability/Lethality Modeling of Armored Combat Vehicles - Status and Recommendations,” Army Research Laboratory, U. S. 1993.
H. G. Hwang, J. W. Lee, J. W. Lee and J. S. Lee, “A development of survivability analysis system for tank using importance of components,” Journal of the Korea Institute of Information and Communication Engineering, vol. 19, no. 5, pp. 1269-1276, 2015.
K. S Kim and J. H. Lee, “Simplified vulnerability assessment procedure for a warship based on the vulnerable area approach,” Journal of Mechanical Science and Technology, vol. 26, no. 7, pp. 2171-2181, 2012.
H. G. Hwang, J. W. Lee, B. K. Yoo and J. S. Lee, “A development of kill vulnerability analysis system for tank based on hit probability using fault tree analysis,” Journal of the Korea Institute of Information and Communication Engineering, vol. 19, no. 8, 2015 (in press)
M. S. Wi, S. M. An, T. H. Eom, H. J. Jin, D. S. Kim and J. S. Park, "Survivability and reliability analysis for combat system by using fault tree structure" in Proceeding of The 2014 Spring Conference of The Korean Society of Mechanical Engineers(Division of Reliability), Jeju, Korea, p. 174, 2014.
H. G. Hwang, H. K. Kim, J. W. Lee and J. S. Lee, "A study on importance estimation of critical components for combat system survivability analysis," in Proceeding of The 1st Annual Conference of Next Defense, Seoul, Korea, pp.145-146, 2014.
IEC 60812, Analysis Techniques for System Reliability - Procedure for Failure Mode and Effects Analysis (FMEA), International Electrotechnical Commission, Switzerland, 1985.
MIL-STD-1629A, Military Standard : Procedures for performing a Failure Mode, Effects, and Criticality Analysis, Department of Defense(DoD), Washington D. C., 1980.
R. J. Latino, K. C. Latino and M. A. Latino, Root Cause Analysis: Improving Performance for Bottom-Line Results, 4th ed. CRC Press, 2011.
D. J. Shin, A Study on Improvement of Reliability for the Urban Transit Vehicles using FMEA/FMECA, M.S. Thesis, Department of Mechanical Engineering, Sungkyunkwan University, Korea, 2011.