JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Risk of Electric Arcs by Conductive Dust Accumulated on Circuit Breaker
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Risk of Electric Arcs by Conductive Dust Accumulated on Circuit Breaker
Kim, Doo Hyun; Kang, Yang Hyun; Kim, Eun Jin; Hwang, Dong Gyu;
  PDF(new window)
 Abstract
In general, the causes of the electrical fire are overcurrent, short circuit, poor contact, etc. This study is aimed to recognize the risk of electric arc to prevent electrical fires due to the conductive dust accumulated on the circuit breaker. The experiment was carried out by the method that conductive metal dust collected from the field is being accumulated on the experimental electrodes with gap of 13 mm until the arc is generated. In case that arc was generated, the amount of conductive dust was measured and the thickness was calculated. This experiments was conducted by particle size. In order to distinguish particle size, mesh size(60~100, 100~150, 150~200, 200~250mesh) was classified using a sieve. As the results of experiment for each of the particle sizes, it was confirmed that there is differences in the generation of arc depending on the thickness of dust accumulated.
 Keywords
arc;conductive dust;electrical fire;particle size;
 Language
Korean
 Cited by
 References
1.
National Emergency Management Agency, "2012 National Fire Status Statistical Analysis"

2.
C. H. Park, S. M. Bae, Y. B. Lim, G. H. Kim and M. I. Choi, "Research on Characteristics of Arcing Circuit and Evaluation of Societal Cost caused by AFCI Installation" Journal of Korean Institute of Illuminating and Electrical Installation Engineers, Vol. 21, No. 8, pp. 144-150, 2007. crossref(new window)

3.
D. W. Kim, K. Y. Lee, H. W. Kim, H. K. Moon, H. K. Kim and C. S. Choi, "Research on Overheat Protection Techniques of Connection Parts of MCCB by Poor Contact" Journal of Korean Institute of Fire Science & Engineering, Vol. 22, No.4, pp.54-60, 2008.

4.
D. W. Kim, "A Study on the Characteristics of Tracking Deterioration between Electrodes on Phenolic Resin used for Low Voltage", Conference, IEEE 2002.

5.
G. Karady et al., "Flashover Mechanism of Silicone Rubbe Insulators Used for Outdoor Insulation", IEEE Trans. Power Delivery, Vol. 10, No. 1, 1995.

6.
H. Seiichi, "The Influence of Acid Rain on the Tracking Deterioration of Organic Insulating Materials", Proc 5th ICPADM, Korea, pp.754-757, 1997.

7.
NFPA 921, Guide for Fire and Explosive Investigations 1998 Edition, National Fire Protection Association, Inc., Chapter 14, 1998.