JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Effect of Cationic Initiator Content on Electron-beam Curing of Difunctional Epoxy Resin
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Effect of Cationic Initiator Content on Electron-beam Curing of Difunctional Epoxy Resin
Soo-Jin Park; Gun-Young Heo; Jae-Rock Lee; Dong Hack Suh;
  PDF(new window)
 Abstract
In this work, the effect of cationic initiator content on the electron-beam (EB) curing process of diglycidylether of bisphenol-A (DGEBA) resin was studied using near-infrared spectroscopy (NIRS), thermogravimetric analysis (TGA), and critical stress intensity factor . Benzylquinoxalinium hexafluoroantimonate (BQH) were used as an initiator and its content was varied from 0.5 to 3 phr. NIRS measurements showed that the hydroxyl group of EB-cured epoxy resin was increased with increasing the BQH content. Thermal stability and value of EB-cured epoxy resin were increased with increasing the BQH content but were decreased above 2 phr content. These results could be attributed to the decrease of the conversion and degree of crosslinking. In another word, the conversion and degree of crosslinking were restricted by the incomplete network structure from high reactivity at the BQH content above 2 phr, resulting in decreasings of thermal stability and .
 Keywords
Electron-Beam; Epoxy; Cationic Initiator; Thermal Stability; ;
 Language
Korean
 Cited by
1.
Conductivities and curing properties of electron-beam-irradiated anisotropic conductive films, Journal of the Korean Physical Society, 2012, 61, 2, 282  crossref(new windwow)
2.
Thermogravimetric and Fourier-transform infrared analyses on the cure behavior of polycardanol containing epoxy groups cured by electron beam, Journal of Applied Polymer Science, 2015, 132, 10, n/a  crossref(new windwow)
3.
Contact resistance properties of electron-beam-cured anisotropic conductive films, Journal of the Korean Physical Society, 2013, 63, 7, 1477  crossref(new windwow)
4.
Electron beam curing of acrylated epoxy resins for anisotropic conductive film application, Thin Solid Films, 2013, 547, 246  crossref(new windwow)
5.
Effects of the electron-beam absorption dose on the glass transition, thermal expansion, dynamic mechanical properties, and water uptake of polycardanol containing epoxy groups cured by an electron beam, Journal of Applied Polymer Science, 2015, 132, 39, n/a  crossref(new windwow)
 References
1.
Mehnert, R.; Pincus, A.; Janorsky, I.; Stowe, R.; Berejka,A. UV & EB curing Technology & Equipment, 2nd Ed.; Johm Willey & Son, London, 1998.

2.
Glauser, T.; Johansson, M.; Hult, A. Macromol. Mater.Eng., 2000, 274, 20. crossref(new window)

3.
Crivello, J. V.; Walton, T. C.; Malik, R. Chem. Mater.,1997, 9, 1273. crossref(new window)

4.
Wei, H.; Lu, Y.; Shi, W.; Yuan, H.; Chen, Y. J. Appl.Polym. Sci., 2001, 80, 51. crossref(new window)

5.
Park, S. J.; Kim, T. J.; Lee, J. R. J. Polym. Sci. Polym.Phys., 2000, 38, 2114. crossref(new window)

6.
Park, S. J.; Seo, M. K.; Lee, J. R.; Lee, D. R. J. Polym.Sci. Polym. Chem., 2001, 39, 187. crossref(new window)

7.
Crivello, J. V. J. Polym. Sci., Polym. Chem., 1999, 37,4241. crossref(new window)

8.
Toneri, T.; Sanda, F.; T. Endo, Macromolecules, 2001,34, 1518. crossref(new window)

9.
Sundell, P. E. Cationic Pol Vinyl Ethers using Iodoniumand Sulfonium Salts, Ph. D. Thesis, Royal Institute ofTechnology, Stockholm 1990.

10.
Lopata, V. J.; Saunders, C. B.; Singh, A.; Janke, C. J.;Wrenn, G. E.; Havens, S. J. Radiat. Phys. Chem., 1999,56, 405. crossref(new window)

11.
Takahashi, E.; Sanda, F.; Endo, T. J. Polym. Sci. Polym. Chem., 2002, 40, 1037. crossref(new window)

12.
Park, S. J.; Kim, H. C.; Lee, H. Y.; Suh, D. H. Macromolecules,2001, 34, 7573. crossref(new window)

13.
Finzel, M. C.; Delong, J.; Hawley, M. C. J. Polym. Sci.Polym. Chem., 1995, 33, 673. crossref(new window)

14.
Yagci, Y. Reetz, I. Prog. Polym. Sci., 1998, 23, 1485. crossref(new window)

15.
Xu, L.; Schlup, J. R. J Appl. Polym. Sci., 1998, 67, 895. crossref(new window)

16.
Kwak, G. H.; Park, S. J.; Lee, J. R. J. Polym. Appl.Polym. Sci., 2000, 78, 290. crossref(new window)

17.
Li, F. M..; Bao, J. W..; Chen, X. B.; Bao, H. Y.; Wang,H. L. Radiat. Phys. Chem., 2002, 63, 557. crossref(new window)

18.
Rabeik, J. F. Mechanisms of Photophysical Processesand Photochemical Reactions in Polymers, John Wiley& Sons, New York, 1987.

19.
Glauser, T.; Johansson, M.; Hult, A. Macromol. Mater.Eng., 2000, 274, 25. crossref(new window)

20.
Park, S. J.; Kim, H. C. J. Polym. Sci. Polym. Phys.,2001, 39, 121. crossref(new window)

21.
Peterson, R. E. Stress Concentration Factors, WilleyInterscience, New York (1974).

22.
Zheng, S.; Wang, J.; Guo, Q.; Wei, J.; Li, J. Polymer,1996, 37, 4667. crossref(new window)