Advanced SearchSearch Tips
Fast Transient Response Techniques for PWM Buck Converter
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Journal of IKEEE
  • Volume 20, Issue 1,  2016, pp.103-106
  • Publisher : Institude of Korean Electrical and Electronics Engineers
  • DOI : 10.7471/ikeee.2016.20.1.103
 Title & Authors
Fast Transient Response Techniques for PWM Buck Converter
Seok, Jinmin; Suh, Jung-Duk; Kong, Bai-Sun;
  PDF(new window)
PWM buck converters usually use a type-III error amplifier. Since this amplifier has a big capacitor with slow slew rate, they can generate an unintended large overshoot/undershoot at the output when a large load current change occurs. They can also respond slowly by varying the reference voltage. In order to increase battery lifetime, power supplies require a various range of load current and output voltage. PWM buck converter also should have a characteristic of both fast load response and reference tracking. This paper surveys a few recent techniques for reducing the settling time, and discusses their merits and limitations.
Buck Converter;Fast transient;Reference tracking;PWM;compensation;
 Cited by
빠른 응답을 갖는 멀티페이스 벅 변환기,이윤재;노정진;

전기전자학회논문지, 2016. vol.20. 3, pp.314-317 crossref(new window)
Multi-Phase Buck Converter with Fast Transient Response, Journal of IKEEE, 2016, 20, 3, 314  crossref(new windwow)
H.-W. Huang, K. H. Chen, and S. Y. Kuo "Dithering skip modulation, width and dead time controllers in highly efficient dc-dc converters for system-on-chip applications", IEEE J. Solid-State Circuits, vol. 42, no. 11, pp. 2451-2465, Nov. 2007. crossref(new window)

D. Ma and W. H. Ki, "Fast-transient PCCM switching converter with freewheel switching control", IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 54, no. 9, pp. 825-829, Sep. 2007. crossref(new window)

Y.-H. Lee, S.-J. Wang, and K.-H. Chen, "Quadratic differential and integration technique in V2 control buck converter with small ESR capacitor," IEEE Trans. Power Electron., vol. 25, No. 4, pp. 829-838, Apr. 2010. crossref(new window)

C. H. Tsai, S. M. Lin and C. S. Huang, "A Fast-Transient Quasi-V2 Switching Buck Regulator Using AOT Control With a Load Current Correction (LCC) Technique", IEEE Trans. Power Electron., vol. 28, No. 8, pp. 3949-3957, Aug. 2013. crossref(new window)

S. Tian, F. C. Lee, Q. Li and Y. Yan, "Unified Equivalent Circuit Model and Optimal Design of V2 Controlled Buck Converters", IEEE Trans. Power Electron., vol. 31, No. 2, pp. 1734-1744, Feb. 2016. crossref(new window)

P.-J. Liu, W.-S. Ye, J.-N. Tai, H.-S. Chen, J.-H. Chen, and Y.-J. E. Chen, "A high-efficiency CMOS dc-dc converter with 9-$\mu$s transient recovery time", IEEE Trans. Circuits and Syst. I, Regular Papers, vol. 59, no. 3, pp. 575-583, Mar. 2012. crossref(new window)

M. Siu, P. K. T. Mok, K. N. Leung, Y.-H. Lam, and W.-H. Ki, "A voltage mode PWM buck regulator with end-point prediction," IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 53, no. 4, pp. 294-298, Apr. 2006 crossref(new window)

Y. Y. Mai and P. K. T. Mok, "A constant frequency output-ripple-voltage based buck converter without using large ESR capacitor", IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 55, no. 8, pp. 748-752, Aug. 2008 crossref(new window)

L. Cheng, Y. Liu, and W. H. Ki, "A 10/30 MHz Fast Reference-Tracking Buck Converter With DDA-Based Type-III Compensator", IEEE J. Solid-State Circuits, vol. 49, no. 12, pp. 2788-2799, Dec. 2014. crossref(new window)

J.-S. Chang, H.-S. Oh, Y.-H. Jun, and B.-S. Kong, "Fast output voltage regulated PWM buck converter with an adaptive ramp amplitude control", IEEE Trans. Circuits Syst. II Express Briefs, vol. 60, no. 10, pp. 712-716, Oct. 2013. crossref(new window)

Y.-S. Hwang, A. Liu, Y.-B. Chang, and J. J. Chen, "A High-Efficiency Fast-Transient-Re sponse Buck Converter with Analog-Voltage-Dynamic-Estimation Techniques", IEEE Trans. Power Electron., vol. 30, No. 7, pp. 3720-3730, Jul. 2015. crossref(new window)