Advanced SearchSearch Tips
Nanocrystallization of Cu-Based Bulk Glassy Alloys upon Annealing
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
  • Journal title : Applied Microscopy
  • Volume 46, Issue 1,  2016, pp.32-36
  • Publisher : Korean Society of Electron Microscopy
  • DOI : 10.9729/AM.2016.46.1.32
 Title & Authors
Nanocrystallization of Cu-Based Bulk Glassy Alloys upon Annealing
Pengjun, Cao; Dong, Jiling; Haidong, Wu; Peigeng, Fan; Anruo, Zhou;
  PDF(new window)
The Cu-based bulk glassy alloys in Cu-Zr-Ti-Ni systems were prepared by means of copper mold casting. The Cu-based bulk glassy alloys samples were tested by X-ray diffractomer (XRD), differential scanning calorimeter, scanning electron microscopy (SEM), Instron testing machine and Vickers hardness instruments. The result indicated that the prepared Cu-Zr-Ti-Ni alloys were bulk glassy alloys. The temperature interval of supercooled liquid region () was about 45.48 to 70.98 K for the Cu-Zr-Ti-Ni alloy. The Vickers hardness was up to 565 HV for the bulk glassy alloy. The bulk glassy alloys were annealed in order to obtain nanocrystals. The results showed that the Vickers hardness was raise up to 630 HV from 565 HV. As shown in XRD results, the amorphous alloys changed to nanocrystals, which were , and CuZr, improved the hardness. The SEM analysis showed that the compression fractured morphology of amorphous alloys was brittle fracture, and the fracture morphology after annealing was ductile fracture. This proved that annealing of amorphous to nanocrystals can improve the plasticity and toughness of amorphous alloys.
Cu-Zr-Ti-Ni alloys;Cu-based bulk glassy alloys;Nanocrystallization;Annealing of amorphous;Mechanical properties;
 Cited by
Barekara N S, Pauly S, and Kumar R B (2010) Structure-property relations in bulk metallic Cu-Zr-Al alloys. Mater. Sci. Eng. A 527, 5867-5872. crossref(new window)

Dai C L, Guo H, and Shen Y (2006) A new centimeter-diameter Cu-based bulk metallic glass. Scripta Mater. 54, 1403-1408. crossref(new window)

Fu H M, Zhang H F, and Wang H (2008) Cu-based bulk amorphous alloy with larger glass-forming ability and supercoiled liquid region. J. Alloy Compo. 458, 390-393. crossref(new window)

Kim Y C, Lee J C, and Cha P R (2006) Enhanced glass forming ability and mechanical properties of new Cu-based bulk metallic glasses. Mater. Sci. Eng. A 437, 248-253. crossref(new window)

Li C, Kou S, Hu Y, Ding Y, and Xu G (2007) Deformation and mechanical properties of Cu-based bulk metallic glasses during crystallization. Chin. J. Nonferrous Met. 17, 1586-1591.

Liu T, Shen P, and Qiu F (2009) Synthesis and mechanical properties of TiC-reinforced Cu-based bulk metallic glass composite. Scripta Mater. 60, 84-87. crossref(new window)

Malekana M, Shabestari S G, and Zhang W (2010) Effect of Si addition on glass-forming ability and mechanical properties of Cu-Zr-Al bulk metallic glass. Mater. Sci. Eng. A 527, 7192-7196. crossref(new window)

Xie G, Louzguine-luzgin V D, Zhang Q S, Zhang W, and Lnoue A (2008) Structure and crystallization kinetics of a $Cu_{50}Zr_{45}Ti_5$ glassy alloy. J. Alloy Compo. 483, 24-27.

Yang Y J, Chen Q J, and Shan S (2009) Microstructure identification of devitrified Cu-Ti-Zr-Ni bulk amorphous alloy. J. Alloy Compo. 480, 329-333. crossref(new window)

Zhang L, Zhu Z, and Zou M (2013) Study on the rapid thermal annealing process of Fe-based amorphous and nanocrystalline strip. J. Funct. Mater. 16, 2416-2418.

Zhang W and Zhang Q (2008) Synthesis and properties of Cu-Zr-Ag-Al glassy alloys with high glass-forming ability. Mater. Sci. Eng. B 148, 92-96. crossref(new window)