JOURNAL BROWSE
Search
Advanced SearchSearch Tips
Removal of Laser Damage in Electrode Formed by Plating in Crystalline Silicon Solar Cells
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Removal of Laser Damage in Electrode Formed by Plating in Crystalline Silicon Solar Cells
Jeong, Myeong Sang; Kang, Min Gu; Lee, Jeong In; Song, Hee-eun;
  PDF(new window)
 Abstract
In this paper, we investigated the electrical properties of crystalline silicon solar cell fabricated with Ni/Cu/Ag plating. The laser process was used to ablate silicon nitride layer as well as to form the selective emitter. Phosphoric acid layer was spin-coated to prevent damage caused by laser and formed selective emitter during laser process. As a result, the contact resistance was decreased by lower sheet resistance in electrode region. Low sheet resistance was obtained by increasing laser current, but efficiency and open circuit voltage were decreased by damage on the wafer surface. KOH treatment was used to remove the laser damage on the silicon surface prior to metalization of the front electrode by Ni/Cu/Ag plating. Ni and Cu were plated for each 4 minutes and 16 minutes and very thin layer of Ag with thickness was plated onto Ni/Cu electrode for 30 seconds to prevent oxidation of the electrode. The silicon solar cells with KOH treatment showed the 0.2% improved efficiency compared to those without treatment.
 Keywords
Crystalline silicon solar cell;Laser doping;Laser damage;Plating;
 Language
Korean
 Cited by
 References
1.
K. K. Hong, S. B. Cho, J. Y. Huh, H. J. Park, and J. W. Jeong, Met. Mater. Int., 15, 307-312 (2009). [DOI: http://dx.doi.org/10.1007/s12540-009-0307-1] crossref(new window)

2.
D. Pysch, A. Mette, A. Filipovic, and S. W. Glunz, Prog. Photovolt: Res. Appl., 17, 101 (2009). [DOI: http://dx.doi.org/10.1002/pip.855] crossref(new window)

3.
A. Mette, Albert-Ludwigs-Universitat Freiburg im Breisgau, (Freiburg im Breisgau, 2007) p. 105.

4.
A. Knorz, M. Peters, A. Grohe, C. Harmel, and R. Preu, Prog. Photovolt: Res. Appl., 17, 127-136 (2009). [DOI: http://dx.doi.org/10.1002/pip.856] crossref(new window)

5.
S. Bowden, V. Yelundur, and A. Rohatgi, Conference Record of the Twenty-Ninth IEEE, 371-374 (2002).

6.
Y. Liu, T. Lai, H. Li, Y. Wang, Z. Mei, H. Liang, Z. Li, F. Zhang, W. Wang, A. Y. Kuznetsov, and X. Du, Small, 8, 1392-1397 (2012). [DOI: http://dx.doi.org/10.1002/smll.201101792] crossref(new window)

7.
F. Toor, H. M. Branz, M. R. Page, K. M. Jones, and H. C. Yuan, Appl. Phys. Lett., 99, 103501 (2011). [DOI: http://dx.doi.org/10.1063/1.3636105 crossref(new window)

8.
M. A. Green, Technology and System Applications (PrenticeHall, Australia, 1982) p. 96.

9.
M. S. Kim, S. C. Park, and D. S. Kim, Sol. Energ. Mat. Sol. C., 117, 126-131 (2013). crossref(new window)