Publisher : The Korean Institute of Electromagnetic Engineering and Science
DOI : 10.5515/KJKIEES.2015.26.12.1108
Title & Authors
A ×49 Frequency Multiplier Based on a Ring Oscillator and a 7-Push Multiplier Song, Jae-Hoon; Kim, Byung-Sung; Nam, Sangwook;
In this paper, a frequency multiplier based on a ring oscillator and a multi-push multiplier is presented. The proposed frequency multiplier consists of two frequency multipliers and these multiplier is connected by injection-locking technique. Each frequency multiplier consists of a ring oscillator with 14-phase output signal and 7-push frequency multiplier requiring 14-phase input. The proposed frequency multiplier provides 2.78~2.83 GHz output signal with 56.7~57.7 MHz input signal. This operation frequency is defined that the output power difference between the carrier and the spur is above 10 dB. The proposed chip consumes 13.93 mW.
Frequency Multiplier;Injection-Locking;Multi-Push Multiplier;Ring Oscillator;
S. -C. Yen, T. -H. Chu, "An Nth-harmonic oscillator using an N-push coupled oscillator array with voltage- clamping circuits", IEEE IMS Dig. Tech. Papers, vol. 3, pp. 2169-2172, Jun. 2003.
N. Mazor, E. Socher, "Analysis and design of an X-band-to-W-band CMOS active multiplier with improved harmonic rejection", IEEE Trans. Microw. Theory Tech., vol. 61, no. 5, pp. 1924-1933, May 2012.
N. Mazor, E. Socher, "X-band to W band frequency multiplier in 65 nm CMOS process", in IEEE Microwave and Wireless Components Letters(MWCL), vol. 22, no. 8, pp. 424-426, Aug. 2012.
I. Kallfass, H. Massler, A. Tessmann, A. Leuther, M. Schlechtweg, and G. Weimann, "A broadband frequency sixtupler MIMIC for the W-band with > 7 dBm output power and > 6 dBm conversion gain", in IEEE MTT-S Int. Dig., pp. 2169-2172, Jun. 2007.
S. K. Kim, C. Choi, C. Cui, B. S. Kim, and M. Seo, "A W-band signal generation using N-push frequency multipliers for low phase noise", in IEEE Microwave and Wireless Components Letters(MWCL), vol. 24, no. 10, pp. 710-712, Oct. 2014.