Advanced SearchSearch Tips
Development of Large Rotor Shaft for Marine Turbo Charger Using Friction Welding with Dissimilar Materials
facebook(new window)  Pirnt(new window) E-mail(new window) Excel Download
 Title & Authors
Development of Large Rotor Shaft for Marine Turbo Charger Using Friction Welding with Dissimilar Materials
Moon, Kwang-Ill; Jeon, Jong-Won; Jeong, Ho-Seung; Cho, Jong-Rae; Choi, Sung-Gyu;
  PDF(new window)
Solid state joining techniques are increasingly applied in a wide range of industrial applications. Friction welding is a solid state welding technique that is used to join similar or dissimilar materials. In this study, friction welding was applied to rotor shaft composed of a disk and a shaft. The disk and shaft were manufactured by hot forging and rolling, respectively. The aim of the study was to predict the structural characteristics during hot forging and friction welding process for rotor shaft of turbo charger. The structural characteristics were determined by heat input and heat affected zone (HAZ) during a short cycle time. Thus, transient FE analysis for hot forging and friction welding was based on heat transfer. The results were used to predict structural characteristics during hot forging and friction welding processes. The prototype of rotor shaft was manufactured by the result-based process parameters.
Friction welding;Hot forging;Finite element analysis;Rotor shaft;
 Cited by
Jeong, H.-S., Cho, J.-R., Oh, J.-S., Kim, E.-N., Choi, S.-G., et al., "Inertia Friction Welding Process Analysis and Mechanical Properties Evaluation of Large Rotor Shaft in Marine Turbo Charger," Int. J. Precis. Eng. Manuf., Vol. 11, No. 1, pp. 83-88, 2010. crossref(new window)

Das, A. S. and Dutt, J. K., "Reduced Model of a Rotor-Shaft System Using Modified SEREP," Mechanics Research Communications, Vol. 35, No. 6, pp. 398-407, 2008.

Lee, J. K., "Design and Operation Possibility of the Automatic Dynamic Balancer for the High Speed Rotating Chuck at the Friction Welding," J. Korean Soc. Precis. Eng., Vol. 18, No. 6, pp. 148-158, 2001.

Polami, S. M., Reinhardt, R., Rethmeier, M., and Schmid, A., "Joint-Site Structure Friction Welding Method as a Tool for Drive Pinion Light Weighting in Heavy-Duty Trucks," Journal of Materials Processing Technology, Vol. 214, No. 9, pp. 1921-1927, 2014. crossref(new window)

Hazra, M., Rao, K. S., and Reddy, G. M., "Friction Welding of a Nickel Free High Nitrogen Steel: Influence of Forge Force on Microstructure, Mechanical Properties and Pitting Corrosion Resistance," Journal of Materials Research and Technology, Vol. 3, No. 1, pp. 90-100, 2014. crossref(new window)

Prashanth, K. G., Damodaram, R., Scudino, S., Wang, Z., Rao, K. P., et al., "Friction Welding of Al-12Si Parts Produced by Selective Laser Melting," Materials & Design, Vol. 57, pp. 632-637, 2014. crossref(new window)

Anand, K., Barik, B. K., Tamilmannan, K., and Sathiya, P., "Artificial Neural Network Modeling Studies to Predict the Friction Welding Process Parameters of Incoloy 800h Joints," Engineering Science and Technology, an International Journal, Vol. 18, No. 3, pp. 394-407, 2015. crossref(new window)

Mercan, S., Aydin, S., and Ozdemir, N., "Effect of Welding Parameters on the Fatigue Properties of Dissimilar AISI 2205-AISI 1020 Joined by Friction Welding," International Journal of Fatigue, Vol. 81, pp. 78-90, 2015. crossref(new window)

Kimura, M., Fuji, A., and Shibata, S., "Joint Properties of Friction Welded Joint between Pure Magnesium and Pure Aluminium with Post-Weld Heat Treatment," Materials & Design, Vol. 85, pp. 169-179, 2015. crossref(new window)

Ma, H., Qin, G., Geng, P., Li, F., Fu, B., et al., "Microstructure Characterization and Properties of Carbon Steel to Stainless Steel Dissimilar Metal Joint Made by Friction Welding," Materials & Design, Vol. 86, pp. 587-597, 2015. crossref(new window)

Ajith, P., Barik, B. K., Sathiya, P., and Aravindan, S., "Multiobjective Optimization of Friction Welding of UNS S32205 Duplex Stainless Steel," Defence Technology, Vol. 11, No. 2, pp. 157-165, 2015. crossref(new window)

Schmicker, D., Persson, P.-O., and Strackeljan, J., "Implicit Geometry Meshing for the Simulation of Rotary Friction Welding," Journal of Computational Physics, Vol. 270, pp. 478-489, 2014. crossref(new window)

Iracheta, O., Bennett, C., and Sun, W., "A Sensitivity Study of Parameters Affecting Residual Stress Predictions in Finite Element Modelling of the Inertia Friction Welding Process," International Journal of Solids and Structures, Vol. 71, pp. 180-193, 2015. crossref(new window)

Bennett, C., "Finite Element Modelling of the Inertia Friction Welding of a CrMoV Alloy Steel Including the Effects of Solid-State Phase Transformations," Journal of Manufacturing Processes, Vol. 18, pp. 84-91, 2015. crossref(new window)

Yang, X., Li, W., Li, J., Xiao, B., Ma, T., et al., "Finite Element Modeling of the Linear Friction Welding of GH4169 Superalloy," Materials & Design, Vol. 87, pp. 215-230, 2015. crossref(new window)